Zyre

Capture this during the summer with my iPhone XR. After I capture it I got the idea that it looked like a pan of food being flipped in the air. Like it's some kind of meat and the wood on the left is the handle. But I can also simply see things that others don't.

Hello everyone, Before I start, I would like to point out that I'm posting this in general. This question would fit more inside Photography or Phones and Tablets, but I can't post a thread in both locations. Onward with the topic at hand! I've lately been looking into getting into some new hobbies and experiment. Upgrading my PC and gaming have become somewhat of a drag and a lot of my time I just repeat things and bore my time by mindlessly searching the internet. I have three subjects that I wanted to talk about. What I've been inte

Thanks ill test it for a couple of days/weeks without XMP. I also found out my Motherboard had a new bios version, so I installed that.

As the title of this topic said, for a while now I've been intermittently having a issue where my rig will restart without BSOD. Checking the Event Viewer it seems to be because of a Kernel error 41. Looking around online not much can be found about it except that it's a situation where the PC didn't get enough power. My rig doesn't have any overclock on the 3900x nor made changes to the BIOS except setting the XMP profile and disabling ErP (I hated how my usb, keyboard and mouse stayed on when the PC was off). The motherboard is running the latest BIOS version and I have already m

A couple of days ago I upgraded from a 6600k to a Ryzen 3900x and Aorus Master x570. The BIOS was updated to version F11 and all the latest drivers where installed in Windows 10 version 1909. For about a day everything was running flawless. I was able to game and use my PC, but the day after I started having multiple BSOD's out of nowhere consecutive. The only thing I had changed was enabling the ErP function in the BIOS, so my keyboard LEDS didn't stay on when the PC was off. I went ahead and tested each RAM stick separately using Memtest86, but no issue was discovered

Recently got myself a 3900x and strix e x570. However I have been getting a couple of issues. 1) When updating to BIOS 1407 I lost the ErP function. When downgrading the BIOS to 1405 I have the function again. Will ASUS solve this? Do more people have this issue 2) My Ducky One 2 Mecha LEDS just keep shining. I already disabled the USB power settings and also disabled ErP, yet they keep shining. My phone doesn't charge when my pc is off, but my ducky does. I performed an CMOS reset and other usb. I'm lost. 3) When I have CSM disabled, I get no splash screen

Hey all, this morning I woke up and decided to try again. I put in the third RAM stick and the system actually booted! I put in the final RAM stick and it also booted. So basically the issue is resolved. Maybe I was tired last night as I did it late in the night, but from what I remember I did the exact same thing now as I did yesterday. Oh well, I'm very happy with my upgrade now!

The list shows the HX426C15FBK2/16 as compatible. This is basically the same ram, but it's sold as a 2x 8gb kit instead of the 2x 4gb kit I have. If it was a compatibility issue, I would have the same issue with only 2 sticks in the board. Issue only happens when I add more.

I just finished upgrading from my 6600k and MSI Krait Gaming 3x to a 3900x and Strix E x570. The installation hasnt gone very well. First I had the issue where no signal came through, and now I have issues with my RAM. When I put 2 ram sticks (2 times 4gb) in their respective dual channel slots, the pc will boot up fine. But the moment I put in a third or additional fourth stick, nothing happens. The motherboard light will be constant orange, which points to an DRAM issue. However the ram stick is fine. I tested all 4 sticks separate. I also upd

For the past couple of weeks I've been getting WHEA_Uncorrectable_Error during startup. The issue happens intermittently and I have found no way to reproduce it. I looked online and most seem to point to an unstable overclock. My 6600k did have an OC, so I reset the motherboard to it's default settings. Sadly the issue continues. Besides that I've done a memory check using Memtest, did scannow in the cmd and installed the latest drivers. No minidump is being generated as the BSOD is stuck at 0% complete. Should someone be happy enough to help me

I've been planning on getting myself a second monitor to compliment my MG279Q, but am not sure if I want another 1440p 144hz or a 4K 60hz. The LG 27UL650 is very compelling as it's 4K 60hz, has HDR and is 400 euros when rounded off. Buying a second MG279Q would be 100 euros more, for a total of 500. I will mostly just use the second monitor to have programs open, have Twitch/YouTube open while gaming.

I'm planning on buying myself the Beyerdynamic DT 990 Pro and a Fiio E10K Olympus 2 for use on my PC, after my headset broke. This is a great moment to get dedicated headphones for quality and maybe a separate microphone. However I would also like to use them with my Playstation 4 Pro, but I can't find any confirmation that the E10K and DT 990 will work on the PS4 Pro.

Oh man I am in the same dilemma. Just posting so I can get a update. For me the AD27QD is cheaper, but I also read about ghosting/overshoot which isn't on the PG279Q

For the past couple of years, I have been using the ASUS MG279Q, a monitor which has satisfied my needs so far. I currently use the monitor in combination with my 6600k and 1080Ti, but never bothered using Freesync because of the limited range. My latest plan however is to sell the monitor and get 2 1440p, 144hz, IPS monitors. I'm planning on buying the new monitors one by one. I was looking around and the upcoming LG 27GL850 looked very nice, but the release date has moved backwards lately, and I don't want to wait any longer. While searching a

I've been interested in switching to Ultrawide from my MG279Q. However, seeing I'm coming from 144hz I would like to use the AW3418DW at 120hz OC. The thing that is holding me back, and making me nervous, is that I read a lot online about the 120Hz OC causing flickering in the display, and people needing to replace the monitor. Is the issue as bad as I read online, or is some other reason causing the flickering? I read that Gsync being on causes the issue. I'm fine having Gsync disabled. If someone can comment on this for me, thanks!