IgorM

yes it did mount but writing or reading large files to it didn't work

I've got a 5TB OneDrive

I tried to use rclone to mount my OneDrive on Linux and then add it to plex but after many tries it didn't work at all. I tried to do the same on windows by using the built in explorer function to map a network drive and using the OneDrive app, but plex simply didn't work. After many attempts I used Raidrive to map OneDrive on windows and add it to Plex and it finally worked! My question now is, is there any tested alternative for Linux?

did you solve the issue?

I'm looking for a board that allows me to convert a power supply to provide USB PD power similar to what this dell adapter does https://www.dell.com/en-us/shop/dell-adapter-74mm-barrel-to-usb-c/apd/470-acfh/pc-accessories But on the web I mostly find this kinds of boards designed for consumer devices and not provider: Where can I find this types of provider boards?

I have a laptop that need to replace it's battery, but it is turning off after some seconds when I unplug it from power and then plug it back again in a matter of seconds. It's weird because even when I turn it on while unplugged the battery can last a few minutes.

found out that version c2960-lanlitek9-mz.150-2.SE6 works just fine. Don't know why the other versions didn't

@Lurickany idea why those versions that are supposed to work on the switch don't?

I tried to transfer it via tftp but I couldn't enable a port to connect to the computer, so I did using serial. I tried the recommended version (c2960-lanbasek9-mz.122-55.SE12) for the model I'm using (cisco ws-c2960-24tc-s) but no success. I also tried version c2960-lanlitek9-mz.150-2.SE4.bin but also no success.

Ah ok. I'll do that. My teacher told me that I probably will need to load a new firmware on it, so can I do it via ROMMON?

I currently don't have access to the switch but I can try that on the following days. Is there a key combination to enter on ROMMON mode? I am accessing it via serial console.

I need to configure a cisco 2960 switch for using Packetfence but it is currently stuck in a bootloop. Whenever it's powered on I get the error message shown: and it keeps restarting and showing it all over again.

That's the full output, in case it helps. I didn't find any clue there [ 0.000000] Linux version 5.4.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 5.4.8-1~bpo10+1 (2020-01-07) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-0.bpo.2-amd64 root=UUID=6f92dacc-a4ec-438b-83bd-f6294842471e ro text [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fp

Nothing alarming on dmesg. Don't know if this part could be helpful: [ 2.748159] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun [ 2.749127] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 2.749232] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun [ 2.764697] Console: switching to colour frame buffer device 200x56 [ 2.848203] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 2.975644] ata5: SATA link down (SStatus 0 SControl 300) [ 2.991221] sd

I mean why you said it could be a corrupted filesystem, not as why it is corrupted or what I've done. It was quite a vague statement.