Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

FrostBittn

Member
  • Content Count

    64
  • Joined

  • Last visited

Everything posted by FrostBittn

  1. I was looking at used GPUs and found something I'm interested in, but the only issue with it is it has a bad fan controller. So is it possible that's something that I could replace on the board itself if I feel up to the task, or could I just solve that by reflashing the bios?
  2. Imo, I don't think its justifiable. When you can get a Ryzey 5 2600 for $120 that has more than double the performance of an 1100T, it just doesn't make sense
  3. You'll see motherboards with the naming scheme B150, B250, Z170, Z270, etc. These are the chipsets, knowing this will tell you what CPUs your motherboard supports. Considering you said you have a G4560, no you cannot. You would need a B360 motherboard or better. Edit: Also no, that cpu would not bottleneck your gpu
  4. That narrows it down, but there are 4 generations that have that socket, so what is your chipset?
  5. I would try to take everything out of the case and boot it off of your motherboard box, to eliminate the possibility of a short occurring That board does not have a post code led
  6. @ExiiPlease read the thread before giving suggestions, as everything you've said has been pointed out
  7. Have you tried putting your rams in different slots, that sometimes helps And are you putting the video connector in the gpu and not the motherboard? Edit: I also noticed you don't have a 6-Pin Connector plugged into your gpu, could that be the problem or was it plugged in previously
  8. I've seen a few people on overclocking forums give that example, but I first heard it from Buildzoid
  9. Bandwidth is the rated speed divided by the latency. So 2400/10=240, and 3200/16=200. The 2400MHz CL10 kit has more bandwidth
  10. This might be too late but, I would say to get the 2400MHz CL10 kit, due to higher bandwidth
  11. The difference between those kits is pretty minimal when talking about gaming and streaming. There's also the possibility that 4000 MHz kit won't even post on your motherboard because very high speed memory kits, from Corsair at least, are only verified on 1-2 motherboards. Even with the verified model, it can still be pretty dodgy 64GB is pretty overkill for that kind of use case, 32GB is more than enough. I would buy this kit - https://www.newegg.com/Product/Product.aspx?Item=N82E16820236408
  12. Zen 2 is the Ryzen 3000 series, sorry I should have clarified.
  13. Vega cores? Nothing in this post has anything Vega. Do you need an upgrade right now? If not, I would wait a couple more months for Zen 2 to be released. But if you need an upgrade today, I would get the 2600 over the 1700 because of the small single core performance boost and the better memory controller. Which means better compatibility with more ram. And if you get the 2600, make sure to update your motherboard's bios if it is a B350/X370 board.
  14. I tried reseating both cpus multiples times and they did not work, and can not figure out why my original cpu just decided to work all of a sudden
  15. I did, and it did not work. I just got annoyed and put everything back in my case with my old cpu and it somehow worked. It seems my Motherboard does NOT like the FX 8350 after reading about some other people's experiences with it. So I'm sending the cpu back and just waiting for Zen 2 to be released.
  16. I said the problem was still present when I swapped the new CPU with the Original
  17. I just got a Brand New FX 8350 because it was fairly cheap. So I swapped it out with my FX 6350, and everything was fine, after one reboot it just gave me a black screen. I've tried both sticks of ram in every slot by themselves, swapping out gpu, clearing cmos, reseating the cpu and all connectors, booting with no drives, and for some reason the problem was still present when I swapped the cpu with my original one. There are also no beeps from the speaker on the motherboard, and the fans and lights turn on. Edit: My mobo also has the latest BIOS Specs: Motherboard: MSI 9
  18. I would change that Ryzen 5 1400 to a Ryzen 5 2600 not only because it's a much better value and only $30 more, but because the memory controller on 2nd gen Ryzen is so much better
  19. I think I have to mention that if you buy the RX 570 like @Jurrunio recommended, buy it used since they go for around $100 on ebay
  20. Download MSI Afterburner and mess with the fan curve, your fans probably just aren't ramping up early enough
  21. Yes it will fit. But since you have that board, what cpu are you pairing it with? Because if you have anything lower than an i5 I would say not to get that card
  22. Most of, if not the entire, current Ryzen lineup in reality only requires one 8-Pin EPS connector, so I wouldn't say a 200GE would use anything more than a 4-Pin. Since an 8-Pin can receive a little over 200 watts and a system using only the 200GE will take up about 60 watts. That being said, a power supply is NOT something that you want to cheap out on, as it can fry your computer. How much total system memory do you have? Is it possible that you had a lot of tabs open while trying to watch youtube, assuming you don't have much ram.
  23. Why would it being PCIe 2x mean it isn't compatible with NVMe? There are 2x NVMe drives, such as this one https://www.amazon.com/gp/product/B077GZ7449
  24. NVMe uses PCIe lanes, so yes that board supports booting off of NVMe drives. Just to double check, I checked pcpartpicker if there were any Z97 builds that did this and found this one https://pcpartpicker.com/b/LZjypg
×