Jump to content
Search In
  • More options...
Find results that contain...
Find results in...


  • Content Count

  • Joined

  • Last visited


This user doesn't have any awards

About Shad_Stang

  • Title
  1. Two Questions! 1. Tickets at the door if I have procrastinating friends? 2. Can I cosplay?
  2. Not much to go off here, there was problems like this when it first launched. I would make sure you are on the latest drivers for your GPU first.
  3. I have an Asus Maximus VIII Hero mobo, I updated from version 1903 to 3401, I updated through a flash drive through the menus (as opposed to the physical button). When it stated that the update completed and reboot, nothing showed up on my screen. I cleared the cmos and I got to the american megatrends screen and it woudn't let me press F1 to continue on my Logitech g150s. I got a different keyboard and it worked fine. When I loaded the bios my mouse was fine, but my logitech keyboard wouldn't work. What can I do to get my logitech keyboard to work like it did on bios 1
  4. What does stretching the headband do vs stretching the clamp? It'll probably be worth getting a titan x for that price range
  5. Don't get me wrong these headphones sound amazing and I would love to keep them, but during long periods it seems that the pads push up too much pressure against my upper jaw, even after bending the clamps that attach it to the headband. I had oval/egg shaped headphones and it seems that the circle shaped ones don't do well. Is it the pads? Is it the headphones? It is worth trying the M50x? (does it match it's sound signature?) What do you suggest? Thanks!
  6. I would take out the Noctuas and put back the old fans, making it stock again.
  7. My Zotac GTX 970's fan are too loud, I wish to only replace my fans as I plan on reselling when pascal comes out. The image is the top of my card. Link also here. Observations: There is a mini pwm splitter for the two fans that go to the actual mini pwm port behind the shell When I held down the fan to stop it to see if the noise was the gpu fans, the software reacted by making the other fan run at 100% I originally wanted to put the slim profile 92mm Noctua fans on there, but I don't think it will let the air expel out with the Zotac fan shell cover. I could
  8. There were 3 things that helped with my silent PC. 1. PSU My old Thermaltake had the fans run all the time. I replaced it with a Corsair HX (RX, HX, and AX will work). Even though it's not passive I never heard the fan turn on with my Corsair PSU and my GTX 970 and CPU running at full load, if the fan does turn on, it's at 10db which I think is inaudible. 2. CPU cooler I had a Cooler Master Hyper 212 EVO, the stock fan was too loud so I swapped it with a Noctua NF-F12 and it's silent even at 50% fan speed. 3. GPU I have the lowest Zotac GTX 97
  9. I would keep my eye on the BenQ XR3501. It was $700 during Black Friday on NCIX. Just set a price alert for that monitor on PcPartsPicker.
  10. Rig: Silent Screamer CPU: i5 750 4.0GHz OC GPU: GTX 970 Zotac RAM: 8GB DDR3 (4x Kingston HyperX) Score: 6.1 Other notes: Right Now GPU is OC (VR results were stock), firestrike scores around 9400ish. I do plan on underclocking mt CPU to 3.6GHz to see if test results are similar.
  11. Woah, I don't want my PSU burning down my house, how might that happen with a TR2?
  12. I build my system back in 2010 I have an i5 750, for five years it ran off of a 400w Topower PSU. I then upgraded to a Thermatake TR2 600w, I did some OC'ing to my i5 750 to bring it to 4.0GHz. My voltage on my motherboard is set to a little less than 1.25v with CPU-Z reading 1.232v. I didn't like how loud my Thermaltake was, so I did some research, found out that the TR2 is a terrible PSU. I then found a deal on a Corsair HX750i and will install that. I am wondering what advantages I'll get with the HX750i over the TR2, what harm might have been caused by running the T
  13. Hey I had the System Memory Multiplier at 8x, switch it to 6x and it boots at 3.5GHz!!! What about voltage? My mobo has an Auto setting for voltage, do I just do 15 min stress test to check for stability? At 3.4 and 3.5GHz it set voltage at 1.290V, when I bumped it to 3.6GHz it went up to 1.360V