Emanuel_M

hey the top 280 didnt work but i got a the 240 instead and all is working fine! https://imgur.com/a/5dU8EmE

Im going to go ahead and try this with two x62s in my meshify c as well. 2700x and 5700xt with the g12, fun project ahead!

i got a reference xfx vega 64 yesterday i tweaked the card with Wattman core is at 1632 hbm is at 1000 voltage for both is 1055 max power limit fan 1000-3200 i get amds advertised boost, and sometimes get to 1600mhz, but the card normally does 1560-1580, while 76c being my max temperature i attached my performance logging file and you can open and view it in Adrenalin charts https://adrenalincharts.com/ 20180712-104306.CSV since you have an AIB card, you can do a higher voltage like 1060, or 1000 to get to 1632 and higher.

ryzen doesnt have an igpu, without a gpu you wont see anything.

Some buyers have a bot that will automatically bid for them, therefore winning the auction or like they say sniping the deal.

No beep codes because asrock decided not to have speaker pins on the fp connector and none onboard, no post codes since the mobo doesn’t have an lcd to show any

GPU, or Power Suppy, thats it, or if you have a mechanical drive! wait I thought my other PC had a buzzing noise but it was just the HDD

Could just be coil whine since it looks like youre playing a game. I probably need headphones tho, I just heard the dryer in the backround

My motherboard will not post unless I do a full clear cmos, removing battery, shorting jumper to clear and leaving the system unplugged for 10-15 minutes. I bought this used cuz why not? worth the risk, I got another PC. So once I installed windows and got the system running, I ran aida64 and did cpu and memory testing for 24hrs and passed, so my hardware is fine. Used a new cmos battery (2032) same problem wont POST. So then I looked around some forums and the motherboard (ASRock Z77E-ITX) people have had problems booting after using for a few months, also intel me corrupting part of the bios

read it the same way too. dont worry.