Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Ross Siggers

I have a Dream...The Dreamcast SFF build!

Recommended Posts

Posted · Original PosterOP

Testing a few things out on the bench... It'd be rude to not christen this system with a Dreamcast game wouldn't it ;) 
 

DSC_5570-01-01.jpeg



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

Honestly, I could throw all these parts into the case now and it would work. But I wanna see if I can get the motherboard lower down, I'm still looking at buying some of the very low profile DDR4. everything would just fit better

Parts like a better gpu, higher bandwith riser cable etc, can come later.

I think maybe this weekend I'll make more adjustments to the case, and start shortening all the wires to length to reduce clutter :) 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites

 I heard that the new gtx 1650 low profile have a height of 32 mm. Could it be fit on it? 

I saw some test about 4x to 16x pcie and you loose only 5 or 10% of performance. That's alright 👍

Link to post
Share on other sites
Posted · Original PosterOP

@DECLO 32mm wow really... That's not bad. I landed on the plan of using the 6gb version of the 1060, but doing the same as I already have, putting a low profile cpu cooler on it. They're becoming really cheap now. But that's a decision for a later date! 

 

The riser, that sounds like exactly the one I was planning on getting, it has two ribbon cables instead of the single style I have now. Card is running at pci 1.0 speed or some shit xD

 

 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

When I was playing Sonic Adventure in the previous post, I was just trying to see how hot the heatsink got. Remember, it's very close to the motherboard.

Turns out it gets pretty toasty...but not too hot to touch. So I think as long as I make sure it doesn't touch, even the warm exhaust from the cpu cooler should help. I definitely need to cut away a bit more of that corner in teh case though, the capacitors on the other side get toasty too.

Debating stick-on heatsinks to hlep too...



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

New update coming tonight guys, just a small one; a few tweaks to the psu placement to give some room, and some mounting stuff for the ssd. 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

ACTUALLY SCRAP THAT SHE'S RUNNIN' OH MY GAWWDDDD

So I started the evening deleting the plastic back plate for the cpu, to make a tiny bit more room. And when I went to test fit it, I decided cable routing for a few things and I just ended up hooking everything together and ran it all in-case for the first time!

Significant update incoming, I need to get all the pictures off my phone.



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

So the other day I tried to tuck the pico/KMPKT mini back a little bit, to stop it touching the motherboard when it's hot. There was a notch for a capacitor here, a trimming of a tab there...it got quite in depth, but I managed to get it absolutely as tucked up against the wall of the case as I could. I then made up a couple of mounting standoffs, just like the motherboard ones. These will be glued/epoxied in position when it comes to final assembly :) Don't worry about the connectors; the case isn't going to be jostled about at all, and they're a very snug fit already.
 

 

DSC_5788.JPG.6f82fa77b326b5e94e48dddfc9b046cb.JPG

 

DSC_5781.JPG.493134610dac1eac337f9cce3274b9be.JPG

 

DSC_5785.JPG.8342187368e441c682a44dd35ba80209.JPG

 

DSC_5789.JPG.95c199c9dc1235abc9cb62c084d9072b.JPG

 

DSC_5791.JPG.f727cd9204f1c4c81c93ef9879a29020.JPG

 

DSC_5802.JPG.bfc7db59767a733a34ae7fa7254fb47c.JPG

 

DSC_5806.JPG.bf31e05c3c381a8a8834dc50b9a0b697.JPG

 

 

Next up, I made some more mounts, this time for the ssd. Despite coming in a metal enclosure, it actually has holes for mounting screws? So that's...kinda nice. Anyway, check out how perfectly that cut-out fits around the motherboard standoff. No, I didn't cut a semi-circle on the pcb...that was already there too!

DSC_5794.JPG.bdd677fcda36f0de4e90ce1b3cc17196.JPG

 

DSC_5796.JPG.4547ada70f9a47e5903ab28ae355f17a.JPG

 

DSC_5795.JPG.37ec14ef3d26396fc587c81f55997ea2.JPG

 

DSC_5799.JPG.6beda8de04b617b1613400a4d733d120.JPG

 

 

Also, knowing that the sata headers were very close to where the ssd is mounted, I went and bought the cutest, shortest sata cable I've ever seen!! It's only 7cm long, and it's perfect

 

 

DSC_5810.JPG.f4e5723ee144d1378fbbb8f2109731e4.JPG

 

DSC_5813.JPG.62ca556a63524f158a1deec49194ec60.JPG

 

 

Because the power plug is actually going to be in the same corner as the pico, I made a little opening and looped the power lead back behind the unit itself. 

 

 

DSC_5808.JPG.fe7b12939df7dd7bf53171c1fece4f51.JPG

 

DSC_5818.JPG.2998aaaab4717e2eead70e83948b3677.JPG

 

DSC_5816.JPG.e3a63d110f7fd1887c90ffb6f87b445c.JPG

 

So after all of that, I've got clearance, some hard mounting, and I've also got the beginnings of some cable management going on :) Starting to finalise things and its a nice feeling!

 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

So the really bulky, plastic backing plate for the cpu socket has been annoying me for ages. I mean, it takes up vertical height which is essential in this build, but it's also kinda detrimental. Yeah I know it's supposed to help with socket mounting pressure, but I think it's contributing to the board bending slightly.

SO OFF IT COMES!! I took a soldering iron to heat up the metal fittings, so they'd come out of the moulded plastic. A couple of paper gasket washers later, and the cooler can be reinstalled, tightening down just as it did before, but with less bulk on the back and honestly it feels like it mounts just as well as ever. 

The only thing I'd say is because the mounts are now four individual screws, it was a little fiddly. But that's all.

 

 

DSC_5836.JPG

DSC_5838.JPG

DSC_5839.JPG

DSC_5843.JPG

DSC_5845.JPG

DSC_5848.JPG

DSC_5849.JPG



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

So I was going to try and test fit a few things, since I slimmed the motherboard, moved the pico, etc. As well as reroute the riser cable the other way around the motherboard, to keep it away from the pico heatsink that I know will get a little warm.

But I figured, there's nothing stopping me just building the entire system into the case, I'll be doing most of it anyway to check fitment, which I know will be good anyway....so...

The fact I kept the modem cover removable is a real win here; It means I can easily deal with the otherwise completely hidden/inaccessible power cables. For the purpose of this test, these will be outside the case, because they need some major shortening and resoldering to fit in the space.

DSC_5898.JPG.e14ab8506231f04c751e5e8aa4825f77.JPG

 

DSC_5889.JPG.8361d7e71116d4ba4b7ecf6b4ac33d72.JPG

 

 

No, the build isn't arr-gee-bee enabled, it's just a blue power indicator on the pico ;) 

The ssd and riser cable are running off of the sata power header on the pico, for final assembly I'll cut off the extra two plugs, just a load of necessary clutter. It makes a slightly awkward duck down under the motherboard for the ssd, but it's not like the alternative mounting positions are any better. Then it shoots out the front and wraps around to the riser cable on the far side of the case.

 

DSC_5876.JPG.3ca58f43d3c3ab4bef8f5e6b542dd05b.JPG

 

DSC_5878.JPG.2fa25ec68d22293b3a3018ba5c837058.JPG

 

DSC_5881.JPG.52a8bfa41ee44927bdece60c92eafd37.JPG

 

DSC_5879.JPG.c1c5330aabd09c5cae012ed0c24aa9ad.JPG

 

DSC_5891.JPG.e31308c0e9eb4e9275c5c76337a8f3b2.JPG

 

As mentioned further up, the split power cable is yet to be shortened, so these are still hanging out the back of the case. As well as the power button, temporarily taped to the side. Otherwise it's looking pretty clean, with only the monitor and peripherals, as it should be :) 

 

DSC_5886.JPG.9e2d02749ca6a9ffb43cb7e49a3f6805.JPG

 

DSC_5885.JPG.18ce265783407b9f868c2295f0cf60bc.JPG

 

DSC_5888.JPG.f83f2550e06fc68631dc32b11ed7b347.JPG

 

Considering it's just resting on there atm, the fitment of the lid is pretty good. Nothing is fouling it, so it can rest on the little plastic tabs I left perfectly centred.

 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

@Mr. horse check back in a few minutes ;) The forum was throwing me an error about attachment sizes, so I posted the text and I'm editing in the photos of the first full assembly as we speak, into the previous post



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

One last post, regarding the dreaded thermals....

They're passable right now. Which is as much as I could expect, I was genuinely worried the build would be unusable with it's heat and volume. Truth be told, the fans are audible even at idle, and pretty noticeable when in moderate use. But nothing outrageous, considering what it is. Equivalent to an average gaming PC with cheap fans. And the idea is that it'll be a fair distance away, being hooked up to a TV on my living room, so I can live with the volume.

Taking into account that it has been fairly cool here in the UK the last few days, the idle temperature with the LID ON was still quite a pleasant surprise. The cpu was level at around 35* which is...actually great! Unfortunately the gpu steadily rose from 35* up to 45* over the course of around 10 minutes, so I will definitely be looking into that low profile ram, to give the gpu fan a little room to breath up there against the lid. I think it would stabilise then.

 

Lid ON
806116658_lidon.thumb.jpg.913c8be76170f76a1179e8a931b58fe4.jpg

 

With the LID OFF, processor temperatures stayed boardly the same, as it's intake is on the underside of teh case anyway. But the gpu felt much happier, sticking to 30*. Lid off is how I'll be using this system to game, so I should't have any trouble with it in those situations. Ironically, day-to-day useage with the lid on may be the one that gives me more trouble.

 

Lid OFF
1993876609_lidoff.thumb.jpg.d0d81b9eecc0c1cb024e8d4d325c5dd6.jpg

When the cpu fan spins up even the smallest amount, you can definitely feel air pressure coming out of the controller ports, so I think it'll be wise to leave them as ventillation. The small front Noctua exhaust fan never ramped up, giving the slightest breeze of warm air...May have to check the fan curve for that to see if it's meant to ramp earlier.

Since I have the system fully assembled, I may do some light gaming or cpu heavy tasks, to see what it's like under some load.

 

 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites

It's all come together nicely! Good job!


NEW RYZEN BUILD CPU: AMD 3800X (4.275 @ 1.325V) Motherboard: Asus STRIX X570-E GPU: MSI RTX 2080 SEA HAWK EK X RAM: 16GB G.Skill 3600MHz/CL14  PSU: Corsair RM850x Case: NZXT H700 White Cooling: EK Velocity + MSI EK 2080 block + D5 pump + 360mm rad + 280mm rad
WHAT MY GF INHERITED CPU: Intel i7-6700K (4.7GHz @ 1.39v) Motherboard: Asus Z170 Pro GPU: Asus GTX 1070 8GB RAM: 32GB Kingston HyperX Fury Hard Drive: WD Black NVMe SSD 512GB Power Supply: XFX PRO 550W  Cooling: Corsair H115i Case: NZXT Switch 810 (white) Operating System: Windows 10 Pro 64bit Monitor: AOC 27" QHD 144Hz Keyboard: Corsair K70 Mouse: Razer DeathAdder Elite Audio: Bose QC25
Link to post
Share on other sites
Posted · Original PosterOP

I wired the power button today. Simple job, no easy way to fit a bracket in there so I just whacked some epoxy on there to keep it in place. OH MY GAWD it's so satisfying, the cheap-ass switch I got even has the same long travel and audible click that the original one had...

 

DSC_5851.thumb.JPG.b2d27a4a1ae11562fa072376e2578f18.JPG

 

 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

@GrogStache cheers man!

It's really getting to the finishing touches stage; Cable lengths, gpu mounting, mesh over the vents. When I reassembled it after making the power button, I could see better options for cabling in the front, not to mention I'll trimming the sata one down too.

 

Once it's cable managed a bit in there, I can see the controller ports being even more effective as ventilation. But I'm planning on taking one and making it a passthrough for all the front I/O that's currently hidden ;) 

I still want to drop the motherboard down a little with low profile ram, for more gpu space... but that can come at a later date and probably not effect much of the above :) 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

Just bumping this thread up, with a few thoughts I've been having, although the car is taking priority again as I'm on a tight deadline with that.

GPU mounting

I spent ages thinking about how to mount the card using the standard rear I/O shield, but then I realised...why do I even have to use that? It's not like I'm in a standard form factor xD Not to mention all it does is block exhaust out the rear, which is kind of important in this build.

So I'm going to remove that completely, and use a sheet of metal or plastic, mounted onto the four corners of the motherboard like a backing plate. Then I can drill mounts into it wherever I want for the card, mounting it nice and rigid, as well as giving me flexibility for any future upgrades. All you gotta do is make a new set of mounting holes! This will put a little bit more strain on the motherboard standoffs, so I gotta make sure I get a good epoxy or something to set them in place :)



Front Panel

So for this, pretty simple. I got a second switch and I'll be mounting it in an identical fashion as before, but on the other side. That way POWER is actually power, and OPEN is going to be reset. 

I actually bought a 'front panel set', so it comes with power and hdd activity lights. So I'm going to solder on a new led that's orange, and run it up to the original power light position on the Dreamcast. I know on modded consoles people like to make this blue instead...but this isn't an actual Dreamcast anymore ;) 

 

 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

I did some cable management and cooling bits last night;

 



-- Modified the Add2psu by removing it's molex plug, and soldering a fan connector in it's place. This means it can plug directly into the splitter from the motherboard, completely eliminating the temporary cable I had before

 

-- Trimmed the housing of the Sata plug into the psu, in an attempt to get it sitting flatter. Before it was pressing against the wall of the case, and in turn pushing the psu towards the motherboard.

 

-- Cut off two of the four 'daisy-chained' Sata connectors coming from the psu, getting rid a lot of bulk at the front of the case. Sata isn't a small connector!

 

-- Managed to tuck the whole cable for the Noctua fan behind/underneath the 3D-printed mounting bracket. This was nice because I really didn't want to cut up the nice sleeved fan cable!

 

-- Removed the bracket from the rear of the graphics card and test fitted. It already looks like it'll cool better ^_^ 

 

-- Hard to explain but I filed the inside of the air vents on the case, to try and help reduce turbulence. imagine it like portin/polishing an engine. Not sure if this will make a difference to cooling but it may make the exhaust fan quieter...

 

 

 

After doing the above, I actually now have...well, quite a lot of space up front! I'll try and post pictures but it's hard to show how much better it is.



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

Hmm. Watching 1080p Youtube with the lid on doesn't bode well for thermals, it was rising quite sharply until I took the lid off again...Will thermals be the death of this project?

 

lid on second.jpg

 

 

 

EDIT: NO THEY WON'T!

 

So the gpu essentially feeds from the cpu exhaust. Make that cooler... the whole system benefits, in a far more noticeable way than an ATX or even ITX system would. So I made some temporary...legs. Ambient temperature is maybe 18-20*c.

DSC_6083.thumb.JPG.b1d0f2ad2e90dafa815875f0d694e766.JPG

 

Firstly, idle temperatures, with the lid on... yes you heard me ON. The cpu is sitting at a breezy 28....nice. It essentially acts like an open bench underneath, with that fan placement though. So subsequently the gpu temps are pretty reasonable too, settling in at 43.


916576810_lidonraisedup.jpg.5a0d8d5de21bf9efb58df2257e912916.jpg

 

The next thing I wanted to try was every day media, so basically a youtube test as this would be a bit more gpu intense than browsing websites. I'd expect near, if not identical tests running on netflix, but I didn't test this.

I was fullscreen at 1440p and although it looks like the gpu is still climbing significantly, I would say it was likely to settle in at around 65*c. You can see the cpu wasn't climbing at all. Gpu fan wasn't even that far off the baseline of the custom fan curve, which is 40%. Ignore the messiness at the beginning, my crappy WiFi dongle was struggling to get a good signal.

 

1419446560_lidonraisedup1140pyt.thumb.jpg.d64cd86f8bd6c3a7a599fcef9aefe1fb.jpg

 

 

Probably even more significant in person than the lower temps, was that without the console straight on the desk...it's now actually very quiet. I mean not silent obviously, but before the fans were very erratic, and generally at higher speeds. I'm currently browsing the forum and a few other tabs right now, it's settled all the way down to it's idle temperatures, and isn't obtrusively loud at all. It's probably the equivalent of a laptop fan. Pretty good right?


I MEAN if having the console raised on a little shelf of some sort, seems like a big deal to you. Then this could be seen as a major compromise. But honestly I'm rolling with it, and I'm thinking of maybe putting it on a little arch with my steam controller being stored underneath when not in use

 

^_^ 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites
Posted · Original PosterOP

I supooooooose I should revive this thread, and give you guys some kind of a conclusion *gasps from the crowd*

 

The build hasn't reached it's 'final form' as previously described. You know, with the expensive low profile ram and a GTX1060? But given the thermal limitations with it's current specs, I don't know if it ever will get to that point, being realistic. It did however get to a very complete and useable state, so that's exactly what I've been doing with it.

 

It lives in my bedroom next to my actual consoles, hooked up to the same TV, and it runs all sorts of emulators and older games. Paired with wireless peripherals and it works like a charm, I'm currently regressing to my childhood and using it to replay NFS Underground 2 :D 

I'll add a follow up post tonight with a few pictures, but i essentially just mounted the gpu, finished the front I/O and did some cable management :) 



 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×