push pull (im new to aio coolers)

[snapcrackpop]

so i just got a CORSAIR HYDRO SERIES H60 AIO and i have i also ought 2 corsair sp120 fans to replcae the fan it has on it so if i want pull push i would put the corsair logo on the fan away from the rad on each side right  probably a really stupid question but i just want to make sure and that how it makes sense to me if it was to push and pull on each other 

[corrado33]

Almost all fans have arrows on one of the sides indicating which way the air blows. In my experience, fans almost always "blow" out the side that has the frame, so the opposite side to which is pictured above. 

[DailyProcrastinator]

Air passes through the back of the fan, if you look there are probably tiny arrows on the fans showing you the airflow direction. You want the front of the fan facing you on the front side of the rad and on the other side of the rad you should be looking at the back of the fan. 

[snapcrackpop]

14 minutes ago, corrado33 said:

Almost all fans have arrows on one of the sides indicating which way the air blows. In my experience, fans almost always "blow" out the side that has the frame, so the opposite side to which is pictured above. 

so i would want both of the fan logos towards the cooler?

[snapcrackpop]

here is the link to the aio https://www.amazon.ca/gp/product/B079NXZQBC/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1 i bought the same fan thatso n it so since its facing away on the photo wouldnt that mean both should face away?

14 minutes ago, JM21 said:

Air passes through the back of the fan, if you look there are probably tiny arrows on the fans showing you the airflow direction. You want the front of the fan facing you on the front side of the rad and on the other side of the rad you should be looking at the back of the fan. 

 

15 minutes ago, corrado33 said:

Almost all fans have arrows on one of the sides indicating which way the air blows. In my experience, fans almost always "blow" out the side that has the frame, so the opposite side to which is pictured above. 

 

[corrado33]

1 minute ago, snapcrackpop said:

so i would want both of the fan logos towards the cooler?

I'm unsure how you want it set up, but if you want the air to blow THROUGH the cooler, the logo in the center of the fan does NOT face the cooler. 

[DailyProcrastinator]

2 minutes ago, corrado33 said:

I'm unsure how you want it set up, but if you want the air to blow THROUGH the cooler, the logo in the center of the fan does NOT face the cooler. 

Agreed^ 

 

Just make sure that however you set it up the fans are both in the same orientation. So you never want to see both front sides or back sides of the fans when mounted to the rad.

[Enderman]

23 minutes ago, snapcrackpop said:

so i would want both of the fan logos towards the cooler?

What do you think happens if you have two fans facing each other...

The air will not go anywhere.

The air should go THROUGH the radiator

<-----  [RAD]  <-------

[snapcrackpop]

1 hour ago, Enderman said:

What do you think happens if you have two fans facing each other...

The air will not go anywhere.

The air should go THROUGH the radiator

<-----  [RAD]  <-------

 

1 hour ago, JM21 said:

Agreed^ 

 

Just make sure that however you set it up the fans are both in the same orientation. So you never want to see both front sides or back sides of the fans when mounted to the rad.

ok makes sense how ever what is a better way to do it air puilling in from the case out or from out to in ?

btw i have 3 intakes oln the front and 2 exaushts on top and this will go on the back 

[snapcrackpop]

also another thing is it fine to only have 2 screws holding each fan on since it only comes with 4 screws and i don't have any others that are that long

[DailyProcrastinator]

2 minutes ago, snapcrackpop said:

 

ok makes sense how ever what is a better way to do it air puilling in from the case out or from out to in ?

btw i have 3 intakes oln the front and 2 exaushts on top and this will go on the back 

I would have them blowing air out of the case, I'd also limit the airflow to 3 intakes and 2 exhaust, so the rad at the rad at the back and another fan at the top for exhaust.

[Enderman]

6 minutes ago, snapcrackpop said:

 

ok makes sense how ever what is a better way to do it air puilling in from the case out or from out to in ?

btw i have 3 intakes oln the front and 2 exaushts on top and this will go on the back 

Usually people do front/bottom as intakes and rear/top as exhaust.

[snapcrackpop]

1 minute ago, Enderman said:

Usually people do front/bottom as intakes and rear/top as exhaust.

ok but if im exhausting from the inside my case to out wont all the hot air pass thru the raid and make my temps are than if it was pulling cold air from out and putting hot in and my top exhaust could just handle all the exhausting? 

 

also sorry for all the qustions lol

[Enderman]

1 minute ago, snapcrackpop said:

ok but if im exhausting from the inside my case to out wont all the hot air pass thru the raid and make my temps are than if it was pulling cold air from out and putting hot in and my top exhaust could just handle all the exhausting? 

 

also sorry for all the qustions lol

The air is only a couple degrees hotter, nothing significant.

You either have a cool CPU and warm everything else, or slightly cooler everything else and slightly warmer CPU.

Works fine either way.

[snapcrackpop]

2 minutes ago, Enderman said:

The air is only a couple degrees hotter, nothing significant.

You either have a cool CPU and warm everything else, or slightly cooler everything else and slightly warmer CPU.

Works fine either way.

which way would you do it?

[Enderman]

1 minute ago, snapcrackpop said:

which way would you do it?

If I had a single rad I would put it at the back, if I had a dual or triple I would put it at the front.

If a triple at the front doesn't fit then usually top is the only option left.

[snapcrackpop]

Just now, Enderman said:

If I had a single rad I would put it at the back, if I had a dual or triple I would put it at the front.

If a triple at the front doesn't fit then usually top is the only option left.

yes i  am putting it at the back  but i meant which way would you have the air flow hot air out or cold air in?

[Enderman]

1 minute ago, snapcrackpop said:

yes i  am putting it at the back  but i meant which way would you have the air flow hot air out or cold air in?

Oh, blowing out.

[snapcrackpop]

1 minute ago, Enderman said:

Oh, blowing out.

ok thxs for all the help man!