Bought Gaming PC Parts is it Good

[vjizzle2384]

6 minutes ago, seon123 said:

Full towers are bigger. 

 i know that is there benefit to one then that other

[vjizzle2384]

k Linus explained it in 

 

[LienusLateTips]

22 hours ago, Supahh said:

Go for a hybrid drive instead of a hdd, they're faster, not as fast as an ssd, and they're only a bit more expensive.

Hybrid drives don't make a difference. I have one personally.

 

22 hours ago, r2724r16 said:

Your power supply is garbage, but the rest of the parts are fine. 

It's ok but doesn't make sense.

 

22 hours ago, fasauceome said:

500 is gonna be a little higher than your PC will draw. A 550W would suffice. more does not equal better with power supplies.

*quite a lot higher

39 minutes ago, vjizzle2384 said:

what is better or it does not matter a Full Tower ATX or a Mid Tower ATX

Full towers are bigger but that's about it.

[vjizzle2384]

can anyone tell me why everyone says my PSU is make no sense???

[LienusLateTips]

1 minute ago, vjizzle2384 said:

can anyone tell me why everyone says my PSU is make no sense???

It's a low end PSU with high watts. If you need high watts, you likely have money to buy high end PSU to increase lifespan of that part since usually high watt parts are very expensive, costing upwards of $1200+ for the GPUs that would require that much.

 

Your system will be better off with a good quality 550W unit. There's a PSU Tier List below this post in the signature section. As you can see, your PSU is in Tier 3 there. Personally I would get something from Tier 2 or 1.

[vjizzle2384]

So i made a decision to go with the Cooler Master MB511 it has alot of air flow, now for fan should i get Pressure fans or some good cheap fans like 2 or 3 for $20 fans.  And also which is better for front, and top fans PWM(4pin) or 3 Pins. @Spotty

[Spotty]

8 hours ago, vjizzle2384 said:

So i made a decision to go with the Cooler Master MB511 it has alot of air flow, now for fan should i get Pressure fans or some good cheap fans like 2 or 3 for $20 fans.  And also which is better for front, and top fans PWM(4pin) or 3 Pins. @Spotty

Nice looking case.
You don't really need high pressure fans or PWM fans for the case - those are normally better for your CPU cooler where it needs to read the CPU temperature and adjust their RPM and in the case of high pressure fans are good for radiators with tight fins to help force the air through.

 

For your front intakes and top exhausts, just go with whichever 3pin fans you like. The case supports both 120mm and 140mm fans in the front and top.

[vjizzle2384]

19 hours ago, Spotty said:

Nice looking case.
You don't really need high pressure fans or PWM fans for the case - those are normally better for your CPU cooler where it needs to read the CPU temperature and adjust their RPM and in the case of high pressure fans are good for radiators with tight fins to help force the air through.

 

For your front intakes and top exhausts, just go with whichever 3pin fans you like. The case supports both 120mm and 140mm fans in the front and top.

I picked a different case it was on sell on Amazon for $45 its the Master Box MB500.  ya can wait to put this all together on Thursday when i get my case.  The case comes with 3 LED Fans that integrate with my Giga MOBO.  My MOBO takes a 8 Pin and 4 Pin for CPU had i hard time finding the right plug as my PC is 12 years old and only had 1 4pin for CPU. @Spotty

 

Any thing i should know when installing the motherboard?

[Spotty]

1 hour ago, vjizzle2384 said:

Any thing i should know when installing the motherboard?

Remember to install the IO shield first. 

Install the motherboard standoffs to the case (little pegs the motherboard screws on to) if they aren't already installed.

And otherwise just read the manual that comes with the motherboard. It will detail all the information you need for installing the system.

 

If it's your first time building I'd recommend checking out some YouTube PC build guides from ltt, bitwit, gamers Nexus, and so on. You'll be able to see how everything goes together and they'll probably have plenty of tips for building.

[vjizzle2384]

i have on more question.  My Mother board has a 8 pin and 4 pin for the CPU should i plug in both the 8 pin CPU pin and 4 Pin or one of the other am confused the Manuel does say nothing just shows me the picture below.  My MOBO is GIGABYTE X470 AORUS Gaming 7 WiFi 

 

@Spotty

[Guest]

Just use the 8 pin socket and you should be fine.

[vjizzle2384]

Iam not going to overclock, am going to game and use for regular use, i dont understand the need to overclock when the cpu and gpu should do what it suppose to do, its like buying a Iphone and need to buy a Screen to make it work.  

 

So do i need a expensive Air Cooler or will the Evo 212 or the stock be sufficient?

 

So i only need to plug in the 8 pin will it hurt to plug 4 too? am confused. lol 

[Guest]

2 hours ago, vjizzle2384 said:

Iam not going to overclock, am going to game and use for regular use, i dont understand the need to overclock when the cpu and gpu should do what it suppose to do, its like buying a Iphone and need to buy a Screen to make it work.  

 

So do i need a expensive Air Cooler or will the Evo 212 or the stock be sufficient?

 

So i only need to plug in the 8 pin will it hurt to plug 4 too? am confused. lol 

If you are not overclocking then the stock Ryzen cooler is fine.

 

Yes just plug in the 8 pin cpu. The extra 4 pin is just for additional power to the cpu for high end overclocking. 

[vjizzle2384]

so am looking for a CPU Cooler but all i have is 160mm (6.2999Inches) Tall, i cant find anything except the Hyper 212 Evo, all the ones i want are 6.5Inches to 6.65Inches (165.1mm to 168.91mm).  

 

Do i need to overclock to game with the setup i have Ryzen 5 2600x, 16GB RAM 3000Mhz, GIGABYTE X470 AORUS Gaming 7 WiFi MOBO, GTX 1080 8GB.

[vjizzle2384]

Okey so i built my pc i didnt have the right Mhz on my Memory so i googled it and it said to turn on XMP, so i turned on XMP in my BIOS now my memory is showing up as 1499mhz guess thats x2 to make it 2998Mhz here is CPU-Z let me know if everything looks good.  I run a game Need for Speed Payback before all of this on a 1080p getting about 60-65C on CPU and GPU and about 80-120FPS is that good i dont know.  And i have no idea how to overclock nor want to if my games are running good enough for me.  Let me know 

 

 

[vjizzle2384]

2 minutes ago, vjizzle2384 said:

Okey so i built my pc i didnt have the right Mhz on my Memory so i googled it and it said to turn on XMP, so i turned on XMP in my BIOS now my memory is showing up as 1499mhz guess thats x2 to make it 2998Mhz here is HWiNFO64 let me know if everything looks good.  I run a game Need for Speed Payback before all of this on a 1080p getting about 60-65C on CPU and GPU and about 80-120FPS is that good i dont know.  And i have no idea how to overclock nor want to if my games are running good enough for me.  Let me know