Jump to content

I dont know how much I need to tight cpu cooler screws

MaccaB
By MaccaB
in Cooling
 Share
Posted

As the title said i don't know how much I need to tight the screws i don't want to overpressurize it. I have cooler master 212x.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

To a level that the screws take considerably more force to tighten then it was from the start. It's relatively forgiving on this, so unless you're Hulk you can't overdo it.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

You don't have to screw it down all the way (though I tend to) when it has springs on the screws but so long as there's enough pressure to keep the cooler flat against the CPU then it is tight enough to function fine.

Guides & Tutorials:

PROXMOX - Rebuilding ZFS RAID rpool After Disk Failure

Mass Deploying Customized Windows 10/11 Installs

Building a GNU/Linux Based Windows Deployment Server

GNU/Linux Installer Server: Installation & Configuration

How to: Use (i)PXE to Install Windows from a Network

Why Memorize IP's When You Can Self-Host DNS Instead?

Ventoy - The USB Multi-Boot Utility!

Introduction to PXE/iPXE Network Boot Featuring FreeBSD & Ubuntu Server

 

Don't see what you need? Check the Full List or *PM me, if I haven't made it I'll add it to the list.

*NOTE: I'll only add it to the list if the request is something I know I can do.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Dont know the term for it but roughly translated it would be hand tight. As in how far you can tighten them with just your hands without much effort.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

As far as you can by hand. Just leave the "normal" last twist out. Or unscrew by 1/8th of circle.

^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Focus on tightening the cooler evenly. Unless you're unusually strong or mounting on bare die, you shouldn't be able to overtighten the screws. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×