missing cable Phanteks P400S

[SkyDom]

Ok so I just got my parts 2 days ago, and I build it up just like normal, when everything was connected I looked at the motherboard and realised my case is missing power led + and -. The case is phanteks P400S, this was my first time building a pc, so I searched around the internet looking for answers, but I couldnt find anything, plz help. What do I do? Do I buy new cables, or do I go to the local pc shop, or do I have to get a new case? I can turn the pc on but not off so I have to flip the switch on the psu.

 

It is supposed look like this: But Im missing the power led + and -. what do I do?

 

Edited May 24, 2018 by TiltedKiddo

[1234vietnam]

The power led is not necessary so you're totally fine.

[Dreaper]

Its a combined cable to my knowledge  

[SkyDom]

yea but I dont have the power led cable at all

 

[LukeSavenije]

11 minutes ago, TiltedKiddo said:

yea but I dont have the power led cable at all

 

it could be combined with another cable. that might be why you don't have one.

and even if you don't, all you will miss is one small lamp on the front

[NelizMastr]

17 minutes ago, TiltedKiddo said:

yea but I dont have the power led cable at all

 

So the power light doesn't light up either when you power on the PC? I used to have the P400S and can't remember whether the onboard LED controller handled the power LED with a SATA power or that it had the small header cable. I'm leaning towards the former.

[SkyDom]

1 hour ago, NelizMastr said:

So the power light doesn't light up either when you power on the PC? I used to have the P400S and can't remember whether the onboard LED controller handled the power LED with a SATA power or that it had the small header cable. I'm leaning towards the former.

When I turn on the pc everything turns on leds, and fans and just everything.

[NelizMastr]

13 minutes ago, TiltedKiddo said:

When I turn on the pc everything turns on leds, and fans and just everything.

Then you're good to go.

[SkyDom]

4 minutes ago, NelizMastr said:

Then you're good to go.

but nothing shows on the screen tho

[NelizMastr]

6 minutes ago, TiltedKiddo said:

but nothing shows on the screen tho

That's a different problem and not related to the lights or buttons.

 

Full specs please.

[SkyDom]

17 minutes ago, NelizMastr said:

That's a different problem and not related to the lights or buttons.

 

Full specs please.

This is the full specs of my pc:

 

Msi b350 gaming pro carbon

corsair force mp500 120gb m.2

phanteks p400s

sesagate barracuda 2tb

corsair vengeance 3200mhz 2x8

ryzen 5 1600

nzxt kraken x62

RX 580 8gb aorus

EVGA 650 80+ bronze

4x noctua nf-a14 140mm fan

1x noctua nf-s12a 120mm fan

[NelizMastr]

Check the board for LEDs in the CPU area (DRAM, VGA and CPU LEDs typically) and see if one of them is lit. If yes, there's the problem.

[SkyDom]

4 hours ago, NelizMastr said:

Check the board for LEDs in the CPU area (DRAM, VGA and CPU LEDs typically) and see if one of them is lit. If yes, there's the problem.

I still have the problem with turning off the computer. theres is a red light showing on cpu name, and my gpu wont turn on

[SkyDom]

everything is ok now im installing windows now