Jump to content
Beer_Nontitju

[GUIDE] ULTIMATE Fan RPM & RGB control

Recommended Posts

Posted · Original PosterOP

Hi community,

There is no unified way of syncing RGB lighting between brands. Brands all have their little system: it can be confusing and sometimes even overwhelming.
I took the initiative to start quick guides on how to setup a system per brand. In my next comments there will be very poor attempts of mine to create Schematics for different RGB solutions.

So everyone on the forum, can quickly look up how the RGB-solution of their favorite Brand works!
 

CORSAIR
Corsair LL/SP/HD RGB fans have two cables/headers: One is a 4-pin connector for power, the other a RGB header.

Plug the RGB header in the Fan hub and plug the 4-pin power connector in the commander pro (up to 6x fans).
Then connect the fan hub via the LED header to the commander pro. You can also connect your Corsair LED-strips - trough the LED header - to your commander pro
Both commander pro and fan hub are SATA-powered.

Connect the commander Pro via a USB 2.0 header to the motherboard.

You can now control  your fan speed and lighting with the provided Corsair software.

corsair.png

 


Product list:
- Corsair LL120 Fans 3x Pack + included Fan Hub (100$)
- Corsair Commander Pro (70$)
- Corsair LED strips extention kit (30$)

 

 

NZXT

NZXT Aer fans have two cables/headers: One is a 4-pin connector for power which goes in the motherboard, the other an RGB header which goes in the HUE+.

The NZXT fans can be daisy chained with fan-to-fan-connectors using the IN and OUT headers. 

Then the last fan connects to the HUE+ with a fan-to-LED-connector into one of the 2 channels that can host up to 5 fans.
In this illustration, the 2nd channel connects to the NZXT LED Strips.
The HUE+ is molex-powered and connects via USB 2.0 to the motherboard.

If you don't want to or cannot plug your fans to the motherboard, there is an option to plug the fans into the GRID V3: it's a fan controller sold by NZXT (up to 6x fans).

 

Finally, you can control your fan speed & lighting and led-strips with the provided NZXT Software.
 

nzxtgridv3.jpg

 

You'll notice both USB2.0 Headers on the Mobo are taken, that's why NZXT sells an internal USB-HUB to provide further USB2.0 headers.

 

Product list:

- NZXT Aer 120mm RGB 3x Pack (70$)
- NZXT Hue+ (60$)
- NZXT Grid V3 (45$)
- NZXT LED strips extension kit (25$)

- NZXT USB Hub (25$)

 

COOLERMASTER

Coolermaster RGB fans have 2 headers: One 4pin power connector that goes into the motherboard and one that goes into the Coolermaster RGB controller

Each coolermaster fan connects via an RGB cable into the Coolermaser RGB controller. You can connect up to 4x fans in the controller, however you can increase this number by using a Splitter like shown below.

Splitters like in the illustration are to be bought seperately, however Coolermaster provides 4x RGB cables with the controller.
You can plug the Coolermaster RGB strip into the Coolermaster RGB controller with a provided RGB cable.
The RGB controller is SATA-powered.

Unfortunately, Coolermaster does not provide any sort of Fan Hub for fan control, you will have to use your Motherboard Sys_Fan headers or 3rd Party fan hubs like the thermaltake Commander FP for PWM (15$) which can accommodate up to 10x Fans.

The Coolermaster RGB controller connects to the motherboad via USB 2.0.
Finally, you can control your lighting with the downloadable Coolermaster Software.

Coolermaster.jpg

 

Product list:

- 3x Masterfan Airbalance RGB + included RGB controller (60$)
- Coolermaster RGB strip (25$)
- Coolermaster RGB cable splitter (15$)

- Thermaltake Commander FP for PWM (Fan Hub) (15$)
 

THERMALTAKE

Thermaltake RGB fans have 1 Header that goes into the TT Sync for RGB control.

Each Thermaltake fan connects via an RGB header into the TT Sync. You can connect up to 9x fans in the controller.
You can plug the thermaltake lumi rgb strips into the TT Sync with a provided RGB cable, you then do not need the included little RGB controller anymore.

The TT sync is SATA powered.
The TT Sync connects to the motherboard via USB2.0 header.

Finally, you can control your fan speed & lighting with the Thermaltake Software

 

image.thumb.png.f2d73a9c1d4b60f56371c316c9bf26e7.png

 

Product list:

- Thermaltake RGB Riing 120 3x Pack (80$)
- TT Sync (30$)
- Thermaltake Lumi Plus LED strip (45$)

 

ENERMAX

The Enermax TB RGB Fans have 1 cable/header: they each go in the included Fan & RGB controller (up to 8x fans). This is by far the most practical solution cable management-wise and the cheapest.

The controller connects to the motherboard via RGB header. WARNING, this will only work with motherboards with RGB Headers. In my experience, only the most recent Motherboards are equipped with those.
If you don't have RGB Header on your motherboard, you can use the Infrared Scanner Cable in order to remote-control your fans with the included remote-control.
You can connect up to 2x RGB strips to the controller via RGB Header. Adapters are included for universal compatibility. The LED-Strips in the illustration is a Phanteks RGB Strip.
The controller is Molex-powered.

Finally, you can control your Fan lighting with your motherboard software and their speed with the remote control. If you don't have your Fan Controller connected to the motherboard, you can control the lighting with the remote control.

ENERMAX.jpg

 

Product list:

- ENERMAX TB RGB Fan 120mm 3 in 1 + included Fan Controller & Remote control (60$)

- Phanteks LED strip (15$)

DEEPCOOL MF120

The Deepcool mf120 fans have 1 micro-usb cable/header that goes directly into the hub

 

The Hub has 4-Pin PWM header going into a Sys_Fan so you can control the RPMs with your motherboard.
The Hub connects to your modem per WiFi and requires you to download the Deepcool Fan & RGB control phone APP on iOS or Android.
You can also set the fans RPM on the Deepcool phone APP.
The Hub is SATA-powered

 

Deepcool MF120.jpg

 

Product list:

DEEPCOOL MF120 3in1, Smart Fans (110$)

 


RGB & Fan control ULTIMATE GUIDE !

 

Link to post
Share on other sites
Posted (edited)
26 minutes ago, HappyDog_420 said:

Hi community,

 

There is no unified way of syncing RGB lighting between brands. Brands all have their little system: it can be confusing and sometimes even overwhelming.

I took the initiative to start quick guides on how to setup a system per brand. In my next comments there will be very poor attempts of mine to create Schematics for different RGB solutions.

So everyone on the forum, can quickly look up how the RGB-solution of their favorite Brand works!

 

-supersnip-

Great write up! I only have one question/comment

 

Is it possible to run fans like Thermaltake, Enermax, Cooler master and Deepcool on "universal" RGB softwares like Asus Aura, MSI lighting, etc? I believe cooler master can, not sure about the other three. I know Corsair and NZXT are 100% proprietary, it might be good to note that! :) 

Edited by Crunchy Dragon

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Cadence

Purple Build Post --- Please use quotes or tag people in replies, otherwise we wont respond in a timely manner ---  Blue Build Post

CPU i7-4790k    Motherboard Gigabyte z97x-ud5h    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX970 FTW    Case Thermaltake Level 10 GT    

Storage 1x Samsung EVO 250GB, WD Black 3TB, WD Black 5TB    PSU Corsair CX600M      Cooling Corsair H90 140mm (Rear Mounted)

Link to post
Share on other sites
Posted · Original PosterOP
6 minutes ago, TVwazhere said:

Great write up! I only have one question/comment

 

Is it possible to run fans like Thermaltake, Enermax, Cooler master and Deepcool on "universal" RGB softwares like Asus Aura, MSI lighting, etc? I believe cooler master can, not sure about the other three. I know Corsair and NZXT are 100% proprietary, it might be good to note that! :) 

Thank you very much!

I'll tell you ... I don't know.

Seriously though, I prefer using the softwares given by the fan manufacturers. I don't know about Asus Aura, RGB Fusion, etc... But I know that MSI Mystic Light is (in my experience) one of the ugliest, unintuitive and buggiest softwares I've ever tested. A Ubisoft game on release date looks like NASA technology compared to it.

A friend of mine made his Coolermaster fans work with Asus Aura, that's all I know really.
But I couldn't tell you with absolute certainty which fans are compatible with those programs and which aren't sorry.


RGB & Fan control ULTIMATE GUIDE !

 

Link to post
Share on other sites
Just now, HappyDog_420 said:

Thank you very much!

I'll tell you ... I don't know.

Seriously though, I prefer using the softwares given by the fan manufacturers. I don't know about Asus Aura, RGB Fusion, etc... But I know that MSI Mystic Light is (in my experience) one of the ugliest, unintuitive and buggiest softwares I've ever tested. A Ubisoft game on release date looks like NASA technology compared to it.

A friend of mine made his Coolermaster fans work with Asus Aura, that's all I know really.
But I couldn't tell you with absolute certainty which fans are compatible with those programs and which aren't sorry.

It would be good to note though, as many people like cohesion between their entire RGB ecosystems, and having just one makes it a lot easier (Asus Aura controlling GPU and Ram while Corsair controlling fans, led strips and peripherals for example. Many peoiple would jsut rather use a "universal" software, and Asus seems to be leading that charge)


"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Cadence

Purple Build Post --- Please use quotes or tag people in replies, otherwise we wont respond in a timely manner ---  Blue Build Post

CPU i7-4790k    Motherboard Gigabyte z97x-ud5h    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX970 FTW    Case Thermaltake Level 10 GT    

Storage 1x Samsung EVO 250GB, WD Black 3TB, WD Black 5TB    PSU Corsair CX600M      Cooling Corsair H90 140mm (Rear Mounted)

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, TVwazhere said:

It would be good to note though, as many people like cohesion between their entire RGB ecosystems, and having just one makes it a lot easier (Asus Aura controlling GPU and Ram while Corsair controlling fans, led strips and peripherals for example. Many peoiple would jsut rather use a "universal" software, and Asus seems to be leading that charge)

I understand, it's all such a mess and Asus Aura is pretty much the only universal possibillity.
That's why in my opinion, they should go for the ENERMAX fans since the HUB syncs with the motherboard 


RGB & Fan control ULTIMATE GUIDE !

 

Link to post
Share on other sites

Great write up! Love the guide, definitely am going to save. Is there any support from a service to use Amazon's Alexa (or google's Home) to control these? I know you can use basic IFTTT programming to make them work.

Link to post
Share on other sites
Posted · Original PosterOP
5 hours ago, Ildiesalot said:

Great write up! Love the guide, definitely am going to save. Is there any support from a service to use Amazon's Alexa (or google's Home) to control these? I know you can use basic IFTTT programming to make them work.

Thanks! 

 

I have no idea! 


RGB & Fan control ULTIMATE GUIDE !

 

Link to post
Share on other sites
On 5/16/2018 at 6:05 PM, Beer_Nontitju said:

Thanks! 

 

I have no idea! 

This software apparently allows you to use Aura to control other companies' RGB products. Have yet to try it myself, but if it does work, this would be amazing!


Watercooling Pro!

Link to post
Share on other sites
Posted · Original PosterOP
9 hours ago, Tech22 said:

This software apparently allows you to use Aura to control other companies' RGB products. Have yet to try it myself, but if it does work, this would be amazing!

Did not know this existed, I'm genuinely curious to see if it works!

Do you need an Asus board on it? Most RGB fans have 2 headers, where or how do I plug in the RGB one?

Plus, Coolermaster's RGB Header (4-pin universal) and Corsair's RGB (3-pin proprietary) header aren't the same...

 

I wonder if I could try it out with my Corsair fans, although I have a z370 MSI board...

 

 


RGB & Fan control ULTIMATE GUIDE !

 

Link to post
Share on other sites
8 hours ago, Beer_Nontitju said:

Did not know this existed, I'm genuinely curious to see if it works!

Do you need an Asus board on it? Most RGB fans have 2 headers, where or how do I plug in the RGB one?

Plus, Coolermaster's RGB Header (4-pin universal) and Corsair's RGB (3-pin proprietary) header aren't the same...

 

I wonder if I could try it out with my Corsair fans, although I have a z370 MSI board...

 

 

Not sure if ASUS is needed. But I think the main intention was to be able to use the Corsair fans with other software.


Watercooling Pro!

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Recently Browsing   0 members

    No registered users viewing this page.

Buy VPN

×