Jump to content

Cpu reaching 100C when rendering

Ghostcat
By Ghostcat
in Cooling
 Share
Posted

Hey there! 

So my huge problem is that I began rendering a video in Premiere pro when suddenly the Cpu temp monitoring program (Core temp) alarmed me that one of the Cores reached 100 degrees Celsius.

 

I’ve attached an image from the program. I made this screenshot around a minute before the 100C overheat warning. 

 

I’m using an Alpenföhn Mattehorn White CPU cooler , 2 stock case fans ( Ciolermaster I guess ) and another one case fan (AeroCool Ds ) right behind the Matterhorn.

 

I’m sitting here without any ideas what could have been possibly happened.

6B2057BD-2871-4106-9D39-11DE0A400985.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Bad thermal paste application or low mounting pressure probably.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What cpu? 

Remount the cooler and reapply (clean before) thermal paste correctly. 

Gaming HTPC:

R5 5600X - Cryorig C7 - Asus ROG B350-i - EVGA RTX2060KO - 16gb G.Skill Ripjaws V 3333mhz - Corsair SF450 - 500gb 960 EVO - LianLi TU100B


Desktop PC:
R9 3900X - Peerless Assassin 120 SE - Asus Prime X570 Pro - Powercolor 7900XT - 32gb LPX 3200mhz - Corsair SF750 Platinum - 1TB WD SN850X - CoolerMaster NR200 White - Gigabyte M27Q-SA - Corsair K70 Rapidfire - Logitech MX518 Legendary - HyperXCloud Alpha wireless


Boss-NAS [Build Log]:
R5 2400G - Noctua NH-D14 - Asus Prime X370-Pro - 16gb G.Skill Aegis 3000mhz - Seasonic Focus Platinum 550W - Fractal Design R5 - 
250gb 970 Evo (OS) - 2x500gb 860 Evo (Raid0) - 6x4TB WD Red (RaidZ2)

Synology-NAS:
DS920+
2x4TB Ironwolf - 1x18TB Seagate Exos X20

 

Audio Gear:

Hifiman HE-400i - Kennerton Magister - Beyerdynamic DT880 250Ohm - AKG K7XX - Fostex TH-X00 - O2 Amp/DAC Combo - 
Klipsch RP280F - Klipsch RP160M - Klipsch RP440C - Yamaha RX-V479

 

Reviews and Stuff:

GTX 780 DCU2 // 8600GTS // Hifiman HE-400i // Kennerton Magister
Folding all the Proteins! // Boincerino

Useful Links:
Do you need an AMP/DAC? // Recommended Audio Gear // PSU Tier List 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
25 minutes ago, FloRolf said:

What cpu? 

Remount the cooler and reapply (clean before) thermal paste correctly. 

He has an i7 7700K, I think it's a bad mount or he didn't even put paste?

 

Specs from his profile:

 

Spoiler
  • CPU
    Intel Core i7-7700K @ 4.20Ghz
  • Motherboard
    Asrock Z270 Killer SLI
  • RAM
    2x G.SKill Ripjaws 8GB @ 3000Mhz
  • GPU
    None because of the prices...
  • Case
    Corsair Carbide 200R
  • Storage
    128GB SSD + 3TB WD RED
  • PSU
    700W Chieftec Elements
  • Display(s)
    1x WQHD LG (27'')
  • Cooling
    Alpenföhn Mattehorn White
  • Keyboard
    Urage CYBERBOARD
  • Mouse
    AKLYS Gaming Mouse
  • Operating System
    WINDOWS 10 PRO

 

CPU: AMD Ryzen 5 5600X | CPU Cooler: Stock AMD Cooler | Motherboard: Asus ROG STRIX B550-F GAMING (WI-FI) | RAM: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 CL16 | GPU: Nvidia GTX 1060 6GB Zotac Mini | Case: K280 Case | PSU: Cooler Master B600 Power supply | SSD: 1TB  | HDDs: 1x 250GB & 1x 1TB WD Blue | Monitors: 24" Acer S240HLBID + 24" Samsung  | OS: Win 10 Pro

 

Audio: Behringer Q802USB Xenyx 8 Input Mixer |  U-PHORIA UMC204HD | Behringer XM8500 Dynamic Cardioid Vocal Microphone | Sound Blaster Audigy Fx PCI-E card.

 

Home Lab:  Lenovo ThinkCenter M82 ESXi 6.7 | Lenovo M93 Tiny Exchange 2019 | TP-LINK TL-SG1024D 24-Port Gigabit | Cisco ASA 5506 firewall  | Cisco Catalyst 3750 Gigabit Switch | Cisco 2960C-LL | HP MicroServer G8 NAS | Custom built SCCM Server.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

1. Make sure that you removed the plastic on the bottom of the cpu cooler

2. Did you apply thermal paste?

3. Did you screw the cooler in all the way? But make sure that you dont overpressurize it. Screw it in tightly, but not too.

4. If you had applied thermal paste, remove it completely with pure alcohol and a napkin and reapply it, make sure it is a even spread.

5. Are the cooler fans spinning, and how fast? Manually set them to full speed and see if that helps.

 

You have a 95 w cpu and a 210 w max cooler, so your cpu should remain nice and cool.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Thank you guys for the fast and helpful answers! I’ll inform you guys in a few days! 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Ghostcat said:

Thank you guys for the fast and helpful answers! I’ll inform you guys in a few days! 

Keep us posted then. If you want to inform us don't forget to quote us, so we can see the new message. To quote us type @Ghostcat. So put a @  and then type our name after that, and then click on it when it pops up. Otherways we don't get a notification, and we don't know that you have updated the post.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Are you running OC or stock? You can get lower temps by disabling Asus auto-OC solution (can't remember its name) or by setting manual voltages. Most of the 7700K and 8700K are because of motherboard raising volts too high even at stock clocks.

^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 weeks later...
Posted
  • Author

Hey there! I applied a new paste and at intensive gaming I get around 70-75C.. I think that's fine. Or should It be a bit cooler?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, Ghostcat said:

Hey there! I applied a new paste and at intensive gaming I get around 70-75C.. I think that's fine. Or should It be a bit cooler?

It's still on hotter side for gaming temps. But nothing to worry about. Did you look at voltages?

^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I smell auto. Do not set it to auto. If you set it, then it will lower your temps. From my own experience, Auto uses unnecessarily too much power, which causes excessive heat.

CPU: 8600k @4.9  (1.39v) |  Cooler: NH-U14s | Mobo: Asus Strix z390i | Ram: Gskill DDR4 Trident Z 3600 8GB x 2 16-16-16-36

GPU: Gigabyte G1 1080 GTX | Case: Prodigy ITX | Fans: NH-A14, (exhaust) NH-A12, (intake) NH-A20 (intake)

Samsung EVO 1tb | Samsung EVO 512gb x2 | Intel ssd 128gb

PSU: Powerstation 500W

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, Ghostcat said:

@Srnewbee, how should I set the voltages and which values should I set?

1.28V isn't that bad, but its something you could run fairly good OC with. You can set manual voltages from BIOS. Its CPU VCORE voltage. 1.1V is stock, but some CPUs can't run stable with that. You should try with 1.15-1.2V.

^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
44 minutes ago, LoGiCalDrm said:

1.28V isn't that bad, but its something you could run fairly good OC with. You can set manual voltages from BIOS. Its CPU VCORE voltage. 1.1V is stock, but some CPUs can't run stable with that. You should try with 1.15-1.2V.

ditto

CPU: 8600k @4.9  (1.39v) |  Cooler: NH-U14s | Mobo: Asus Strix z390i | Ram: Gskill DDR4 Trident Z 3600 8GB x 2 16-16-16-36

GPU: Gigabyte G1 1080 GTX | Case: Prodigy ITX | Fans: NH-A14, (exhaust) NH-A12, (intake) NH-A20 (intake)

Samsung EVO 1tb | Samsung EVO 512gb x2 | Intel ssd 128gb

PSU: Powerstation 500W

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×