[Build Log] "Insert fancy pc name here"

[seba7661]

 

"Insert Fancy Pc Name Here"

 

 

Welcome to my build log of my h500p costum water cooling loop.

I will be showing you the small mods im going to make to the case.

And i will be showing almost the whole build progress in small updates. 

I i will be putting the pump under the psu shroud as it makes the build cleaner

and i havent seen anybody do that.

 

Every single bend are made of fiitings instead of bending the tubing.

As i like how it gives the build a more "factory" kind of look.

the fluid i chose is the ek cryofuel blood red.

The whole build is going to be a mix of silver, red and black. 

 

This is the specs and the water cooling parts.

:PC Specs:

Cpu: Intel Core i7-6700 
Gpu: Gigabyte GTX 1080 G1 Gaming
Ram: Corsair Dominator 3000mhz  2x8GB
Ssd: Sandisk ultra 2 960 GB
Case: CoolerMaster H500P
Motherboard: Asus Rog Maximus Formula VIII 
Psu: Corsair RM 750x 80+ Gold
Led: Nzxt Hue+

:Watcer Cooling Parts:

Cpu Block: Ek Supremacy Mx Acetal

Gpu Block: Ek GTX 1080 G1 Acetal

Pump: Ek Revo D5(Sleeved)

Rads: 1x Ek Se360 1x Ek Pe280

Res: x3 250

Fittings:

22x EK Hdc 16mm

6x EK Acf 12/16mm

9x Ek Angled 90

2x Ek Pass Trough

3x EK Angled 45

1x EK T Splitter

1x Ek Ball Valve

2x Ek 20mm Extender

1x Ek 50mm Extender

5x Ek 8mm Extender

 

Thats it about the parts i have used/ordered. i still need a name or something for my pc.

If you have any cool name for it feel free to say what it its.

 Also i would like some opinions on the build.

What i could make different or what you maybe like about it.

Note this is my first ever costum cooled build.

So im not good it and im mostly doing this project to gain experience.

Im not doing anything crazy, i hope you will like the build and give me feedback on what you like and dont like

[seba7661]

 

I now installed the pump and made some cut outs for the 280 rad because it wouldent fit right.

I think it turned out great although im a bit sad the my drilled slipped

and made a big scratch in the floor of the case.

Its okay though because that the psu shroud will cover it.

Next thing i will do are the holes for inlet and outlet for the pump

 

The holes turned out great and i installed the pass trough fittings and a 90 and a 45 degree fitting.

I took the time and installed my 360 rad and my fans.

The fans are the mf 120 rgb from corsair.

I installed them wrong on the picture,

the cables need to go to the other site.

[seba7661]

I really like how this turned out.

 I now will put on the cpu and gpu block. 

[seba7661]

I now installed the cpu block and the gpu block.

I also installed some fittings. 

[seba7661]

-UPDATE-
So today i will get the last fittings that i ordered.

When i then get home from school i will be able to do the whole loop.

Although i still need to clean the rads and i will ned to wait to fill the loop up as i promised my girlfriend she could do that.

I will post some photos later of the loop.

I hope you are going to like it.

[seba7661]

First of all i wanna apologise for the bad quality pictures.

I have now assembled the whole loop, i think it looks good

but i will need to do some minor adjustments.

Im not sure if you can see it on the pictures but some

of the tubing is a little to long on some places.

What i did here was only to test fit.

next thing i will do is to adjust all runs for the correct length and 

flushing my rads and tubings(small plastic parts in them)

 

 

 

 

Please let me know if there is anything you would think i should make different

or if you want to know what i did on certain places in the run.