Jump to content

Project DeSC UTS -DIY steeldeskpc- Hardtube customloop

A little story about my custom build

 

Since i buy my first apartment i have dreamed of building custom desk PC for my system.

I have really limited space for computer, a table is only 135cm wide on the front of the table and 127cm back.
So there isn't lots of room for pc under the table and If there is big pc then there is not enough space for legs.

Nowadays Deskpc is quite "regular" thing, but this is full custom build and I think that someone could be interested about this one.

 

Custom loop stuff:

 

EK-FB ASUS Z270/Z370 Strix RGB Monoblock - Nickel
EK-FB ASUS Z270/Z370 Strix RGB Monoblock - Nickel – EK Webshop

MSI GTX-1080-Ti-SEA-HAWK-EK-X
GeForce GTX 1080 Ti SEA HAWK EK X | Graphics card - The world leader in display performance | MSI Global

EK-XTOP Revo D5 PWM - Plexi (incl. sleeved pump)
EK-XTOP Revo D5 PWM - Plexi (incl. sleeved pump) – EK Webshop

EK-HDC Fitting 16mm - Nickel (6-pack)
EK-HDC Fitting 16mm - Nickel (6-pack) – EK Webshop

EK-HD PETG Tube 12/16mm 500mm (2pcs)
EK-HD PETG Tube 12/16mm 500mm (2pcs) – EK Webshop

EK-CryoFuel Blood Red
EK-CryoFuel Blood Red Premix 900 mL – EK Webshop

6kpl ML120 PRO 120mm PWM Premium Magnetic Levitation Fan
ML120 PRO 120mm PWM Premium Magnetic Levitation Fan

2kpl Alphacool NexXxoS XT45 Full Copper X-Flow 360mm Radiator
Alphacool NexXxoS XT45 Full Copper X-Flow 360mm Radiator

 

Here are some pictures

 

 

First planning and modelling

 

DeskPC_bot.jpg.b3cc385dfe9176709252dbc135815fe4.jpgDeskPC_top.jpg.05cea417f67896cdde78aefca9ae2a34.jpg

After planning and modelling there it is just, drill, cut, grind, weld and few other things what to do..

2017-01-22 09.14.48.jpg

Raf cutting with jigsaw.

2017-01-22 09.28.54.jpg

and grinding.. 

2017-01-22 09.36.57.jpg

 

Cutting space for knees with angle grinder And welding parts together.  (I'm not a professional welder :P)

2017-01-22 11.55.01.jpg

2017-01-22 12.59.27.jpg

2017-03-05 17.30.39.jpg

 

Test fitting with old stuff..

IMG_20170307_084404.jpg

 

Paintings white and black. I planning to paint inside with pearl white, but it is regular glossy white.

IMG_20180218_194306_2.jpg

IMG_20180219_174158.jpg

 

testing with some new stuff..

IMG_20180222_163126.jpg

Custom EK-XRES 800 Revo D5 (Pipe is 800mm long) and threads are made with the lathe. Not sure about that light inside, this was only tested, there is much more to do if I plan to keep it inside.

IMG_20180303_000000.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Hardware will be

Asus Z370

Intel i7 8700K

Msi GFX1080Ti

32GB Corsair 3600Mhz DDR4, of course, whit RGB lighting.

few m.2 SSD:s

Corsair RM1000x PSU

ect.

 

More is coming, stay tuned.

Link to comment
Share on other sites

Link to post
Share on other sites

Followed

 

4 hours ago, Miroshima said:

whit

It's "with" first i thought you were joking but 

then

 

4 hours ago, Miroshima said:

whit pearl white

 

4 hours ago, Miroshima said:

testing whit some new stuff..

just correcting :)

Link to comment
Share on other sites

Link to post
Share on other sites

18 minutes ago, Erklyn said:

It's "with" first i thought you were joking but 

then

 

 

just correcting :)

Ehh.. it's not the first time when with is whit.. :o

Link to comment
Share on other sites

Link to post
Share on other sites

Btw nice work so far really interested in this project waiting for updates :)

Link to comment
Share on other sites

Link to post
Share on other sites

Finally I got EKWB monoblock.. small steps ahead.

 

IMG_20180313_191235.thumb.jpg.8d0181ee354e835265889ff95748d516.jpg

 

Pump, reservoir and first rad installed. 

 

IMG_20180313_191710.thumb.jpg.ec57e5e69b7918f54e25309d5c03e9ad.jpg

 

Tomorrow hopefully I have time to do some tube bendings and other stuff. 

Cable management is going to be a nightmare. Only place where cables can be hidden is under the mobo.  

 

IMG_20180313_185320.jpg

IMG_20180313_185326.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Small update.  Been too busy to continue this.

 

It's quite difficult to make tube where is  2 precisely bends.

So It's going to be a nightmare to do one tube where is 4 bends and all of them has to be perfect. 

I'll try to do the whole loop without 90 dec angle adaptors. (okay almost I absolutely need that one which is in pump outlet) 

IMG_20180321_172414.thumb.jpg.0f0d40311c8dc34d2d671daafe52e953.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

On ‎13‎/‎03‎/‎2018 at 8:46 PM, Miroshima said:

Cable management is going to be a nightmare. Only place where cables can be hidden is under the mobo.  

Good looking design, I love desk builds! Ive seen people say this before with desk builds (ive never done one) and wondered why. You could make holes where cables leave and enter a component, I did it with the false acrylic wall in my build, its just a suggestion and may aid your nightmare?

 

MkRv5mw.jpg

 

Just an example

 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×