Jump to content

Ctrl-F not working in MSI Afterburner

r2724r16
By r2724r16
in Graphics Cards
 Share
Posted

I am trying to undervolt my GPU however the voltage/frequency curve editor is not opening up. Can someone please tell me how to open it up. Thanks in advance.

CPU: Intel Core i7-950 Motherboard: Gigabyte GA-X58A-UD3R CPU Cooler: NZXT HAVIK 140 RAM: Corsair Dominator DDR3-1600 (1x2GB), Crucial DDR3-1600 (2x4GB), Crucial Ballistix Sport DDR3-1600 (1x4GB) GPU: ASUS GeForce GTX 770 DirectCU II 2GB SSD: Samsung 860 EVO 2.5" 1TB HDDs: WD Green 3.5" 1TB, WD Blue 3.5" 1TB PSU: Corsair AX860i & CableMod ModFlex Cables Case: Fractal Design Meshify C TG (White) Fans: 2x Dynamic X2 GP-12 Monitors: LG 24GL600F, Samsung S24D390 Keyboard: Logitech G710+ Mouse: Logitech G502 Proteus Spectrum Mouse Pad: Steelseries QcK Audio: Bose SoundSport In-Ear Headphones

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What GPU do you have? The 1080TI in your profile?

Pascal Undervolting topic, get more out of your card with less power!

Why high refreshrate monitors look better even without Freesync/G-sync in one image.
Stutters, framedrops, "lag". How to provide detailed information with your "bottleneck" question, as well as a few solutions.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Go into settings for Afterburner and select "unlock voltage control".

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I have a gtx 970 oem card from HP. Voltage control is already unlocked. It's on the latest version but I still can't open up the curve.

CPU: Intel Core i7-950 Motherboard: Gigabyte GA-X58A-UD3R CPU Cooler: NZXT HAVIK 140 RAM: Corsair Dominator DDR3-1600 (1x2GB), Crucial DDR3-1600 (2x4GB), Crucial Ballistix Sport DDR3-1600 (1x4GB) GPU: ASUS GeForce GTX 770 DirectCU II 2GB SSD: Samsung 860 EVO 2.5" 1TB HDDs: WD Green 3.5" 1TB, WD Blue 3.5" 1TB PSU: Corsair AX860i & CableMod ModFlex Cables Case: Fractal Design Meshify C TG (White) Fans: 2x Dynamic X2 GP-12 Monitors: LG 24GL600F, Samsung S24D390 Keyboard: Logitech G710+ Mouse: Logitech G502 Proteus Spectrum Mouse Pad: Steelseries QcK Audio: Bose SoundSport In-Ear Headphones

Link to comment
Share on other sites
Link to post
Share on other sites
  • 1 month later...
Posted

Did you find a solution? I have the same issue with ctrl+f . I tried another keyboard and even installed an older version of afterburner :/

 

Some Details:

(Notebook) Windows 10 Pro v1709 from 2018-03-23,

Graphics driver 391.35 (nVidia original)

Gtx 970M

MSI Afterburner versions 4.3.0 (2016) and 4.4.0 (2017), not both installed simultaneously ofc

 

My Card started thermal throttling with heavy load lately, maybe cooling getting old. With the given voltage-bar I can just increase the voltage and not reduce it.

I cleaned it from dust but I'm afraid of destroying that crazy type of cooler-pipe-array-thingy distributed over the whole mainboard if I remove it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 hours ago, Salzstangl said:

My Card started thermal throttling with heavy load lately, maybe cooling getting old. With the given voltage-bar I can just increase the voltage and not reduce it.

I cleaned it from dust but I'm afraid of destroying that crazy type of cooler-pipe-array-thingy distributed over the whole mainboard if I remove it.

Afterburner frequency curve is only available for Pascal GPUs.

| Intel i7-3770@4.2Ghz | Asus Z77-V | Zotac 980 Ti Amp! Omega | DDR3 1800mhz 4GB x4 | 300GB Intel DC S3500 SSD | 512GB Plextor M5 Pro | 2x 1TB WD Blue HDD |
 | Enermax NAXN82+ 650W 80Plus Bronze | Fiio E07K | Grado SR80i | Cooler Master XB HAF EVO | Logitech G27 | Logitech G600 | CM Storm Quickfire TK | DualShock 4 |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
9 minutes ago, xAcid9 said:

Afterburner frequency curve is only available for Pascal GPUs.

Ah, didnt know that, thank you

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×