Jump to content

Wil it fit?

Swesaera
By Swesaera
in Cooling
 Share
Posted

So I have been looking at the Cooler Master Master-Air MA610P and I am getting the S340 Elite. PCPartPicker says that the MA610P is around 158mm but the Cooler Master website says that it is 166mm. See, I know I should be be going off what the website it saying but PCPartPicker is usually trustable with things like this. Can anyone verify that this cooler will fit into a S340 Elite?

http://www.coolermaster.com/cooling/cpu-air-cooler/masterair-ma610p/

https://uk.pcpartpicker.com/product/fFWrxr/cooler-master-masterair-ma610p-534-cfm-cpu-cooler-map-t6pn-218pc-r1

Thanks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
13 minutes ago, Swesaera said:

So I have been looking at the Cooler Master Master-Air MA610P and I am getting the S340 Elite. PCPartPicker says that the MA610P is around 158mm but the Cooler Master website says that it is 166mm. See, I know I should be be going off what the website it saying but PCPartPicker is usually trustable with things like this. Can anyone verify that this cooler will fit into a S340 Elite?

http://www.coolermaster.com/cooling/cpu-air-cooler/masterair-ma610p/

https://uk.pcpartpicker.com/product/fFWrxr/cooler-master-masterair-ma610p-534-cfm-cpu-cooler-map-t6pn-218pc-r1

Thanks

lPjvpRV.png.

158mm if the base plate is excluded. Take the CPU cooler height as 167mm instead.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
10 minutes ago, Jurrunio said:

lPjvpRV.png.

158mm if the base plate is excluded. Take the CPU cooler height as 167mm instead.

So PCPartPicker is wrong on this one? It's always that the best coolers can't fit in the best cases FeelsBadMan

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
10 minutes ago, Swesaera said:

So PCPartPicker is wrong on this one? It's always that the best coolers can't fit in the best cases FeelsBadMan

NH-D15 can fit in with both fans set to their lowest position. If you dont have low profile RAM though the first fan will have to be removed and only use the one at the middle.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

The heatsink itself is 158mm tall. If you lower the fans, it won't make the cooler any taller.  Whether or not that might be a problem will depend on your motherboard and ram.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, WoodenMarker said:

The heatsink itself is 158mm tall. If you lower the fans, it won't make the cooler any taller.  Whether or not that might be a problem will depend on your motherboard and ram.

I have two sticks of G.Skill Trident Z RGB and a ASUS ROG STRIX Z370-E, have any idea if I will actually be able to fit the cooler into the case? 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
23 hours ago, Swesaera said:

I have two sticks of G.Skill Trident Z RGB and a ASUS ROG STRIX Z370-E, have any idea if I will actually be able to fit the cooler into the case? 

The ram won't fit underneath the fans. I'd suggest getting a cooler that clears the dimm slots instead if you want to show off rgb ram.

Some good alternatives include the SR Slim: https://uk.pcpartpicker.com/product/Zr2kcf/be-quiet-cpu-cooler-bk010

Kotetsu: https://uk.pcpartpicker.com/product/7998TW/scythe-cpu-cooler-scktt1000

or the H7 Quad Lumi for RGB. https://uk.pcpartpicker.com/product/bHcMnQ/cryorig-h7-quad-lumi-490-cfm-cpu-cooler-h7-quad-lumi

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, WoodenMarker said:

The ram won't fit underneath the fans. I'd suggest getting a cooler that clears the dimm slots instead if you want to show off rgb ram.

Some good alternatives include the SR Slim: https://uk.pcpartpicker.com/product/Zr2kcf/be-quiet-cpu-cooler-bk010

Kotetsu: https://uk.pcpartpicker.com/product/7998TW/scythe-cpu-cooler-scktt1000

or the H7 Quad Lumi for RGB. https://uk.pcpartpicker.com/product/bHcMnQ/cryorig-h7-quad-lumi-490-cfm-cpu-cooler-h7-quad-lumi

Does the Noctua NH U12S cover RAM? I was thinking about trying to get the new heatsink cover by Noctua.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Hi,

I did manage to fit Be Quiet Dark Rock 3 and its a 160mm High in my S340 Elite with little bit of customization to the fan (Trimmed the bottom edge of the fan a bit to be able to clear for the RAM). 

On the Be Quiet you can adjust the fan location, not sure if you can do that with the C.M, I can close the door with no problem and there is small gap between the fan and the glass door.

I have G.Skill Trident 2x8GB (16GB)

Hopefully that info will help ...

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
12 hours ago, Swesaera said:

Does the Noctua NH U12S cover RAM? I was thinking about trying to get the new heatsink cover by Noctua.

The NH-U12S completely clears the ram. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing Cooling

×