Ryzen 1600 OC works in Ryzen Master but not in BIOS

[zylx]

I just build my first Ryzen build and i experienced some odd behavior. But first my spec:

Cpu: Ryzen 1600

Gpu Palit 1060 jet stream

Coller: Silentium PC Fortis V2

Ram: G.Skill 3000mhz 15-17-17-35 CMK8GX4M2B3000C15R @ 3200mhz 16-16-16-35

Mobo: Msi B350 Tomahawk bios 1.9

 

I find out using Ryzen Master Software that my chip works rock stable at 3,9GHz with 1.35V. It even go to 4.1GHz but need 1.5V to be stable and it is too high for me for everyday usage. So, after 16h successful stress testing with Aida64 i try to set those settings (3,9, 1.35V) in bios, but my system don't even post. I try voltages up to 1.5V but still no post. I read that i should disable AMD Cool N' Quiet, C States/C6, Spread Spectrum, Core Performance Boost but that didn't help either. Max i can get through BIOS is 3.85GHz and it is stable at 1.275V setting (but it actually it is  1.31V). Any advice how i can get better OC with bios?  1.31 is quite low and i fell there is much room for improvement

[just_dave]

Dont overclock with Rzyen master and use LLC 5/6 when overclocking

[EPPHO]

Update bios then try it again

[zylx]

Bios updated to most recent one, LLC 6 didn't help either, system won't post.

[cj09beira]

22 minutes ago, zylx said:

Bios updated to most recent one, LLC 6 didn't help either, system won't post.

have you tried lowering the clocks more than stock and try that (only change one setting at a time), maybe the bios is crapping itself when you change one of the settings