Jump to content

General Intel HEDT Xeon/i7 Discussion

Go to solution Solved by GrockleTD,

image.jpeg.b8411fead9bfaea71c078608c4627778.jpeg

3 minutes ago, Lord Nicoll said:

I have no idea how or why Linus needed phase change for the i7 4790K on 1.4v for 5GHz, he didn't even delid it, complete waste of time. I could have probably gotten 5.2GHz on almost 10°C full load temps with a cooler like that with a delid and Kyronaut. 

I haven't seen the video yet but I imagine it was mostly just to showcase the tech rather than necessarily do it properly/completely

⬇ - PC specs down below - ⬇

 

The Impossibox

CPU: (x2) Xeon X5690 12c/24t (6c/12t per cpu)

Motherboard: EVGA Super Record 2 (SR-2)

RAM: 48Gb (12x4gb) server DDR3 ECC

GPU: MSI GTX 1060 Gaming X 6GB

Case: Modded Lian-LI PC-08

Storage: Samsung 850 EVO 500Gb and a 2Tb HDD

PSU: 1000W something or other I forget

Display(s): 24" Acer G246HL

Cooling: (x2) Corsair H100i v2

Keyboard: Corsair Gaming K70 LUX RGB MX Browns

Mouse: Logitech G600

Headphones: Sennheiser HD558

Operating System: Windows 10 Pro

 

Folding info so I don't lose it: 

WhisperingKnickers

 

Join us on the x58 page it is awesome!

x58 Fan Page

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, WhisperingKnickers said:

I haven't seen the video yet but I imagine it was mostly just to showcase the tech rather than necessarily do it property/completely

Oh trust me, he went pretty far. Just no delid, extreme overclcoking doesn't belong in the same system as stock TIM. 

Yours faithfully

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Lord Nicoll said:

Oh trust me, he went pretty far. Just no delid, extreme overclcoking doesn't belong in the same system as stock TIM. 

In that case that is really disappointing. In your opinion as far as air cooling goes is it ever worth it to delid? I haven't built it yet but I am planning on overclocking a x5690 and I would like to be able to do it on air if I can. Eventually I would like to do hard line water cooling but I don't have the budget for that right now 

⬇ - PC specs down below - ⬇

 

The Impossibox

CPU: (x2) Xeon X5690 12c/24t (6c/12t per cpu)

Motherboard: EVGA Super Record 2 (SR-2)

RAM: 48Gb (12x4gb) server DDR3 ECC

GPU: MSI GTX 1060 Gaming X 6GB

Case: Modded Lian-LI PC-08

Storage: Samsung 850 EVO 500Gb and a 2Tb HDD

PSU: 1000W something or other I forget

Display(s): 24" Acer G246HL

Cooling: (x2) Corsair H100i v2

Keyboard: Corsair Gaming K70 LUX RGB MX Browns

Mouse: Logitech G600

Headphones: Sennheiser HD558

Operating System: Windows 10 Pro

 

Folding info so I don't lose it: 

WhisperingKnickers

 

Join us on the x58 page it is awesome!

x58 Fan Page

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, WhisperingKnickers said:

In that case that is really disappointing. In your opinion as far as air cooling goes is it ever worth it to delid? I haven't built it yet but I am planning on overclocking a x5690 and I would like to be able to do it on air if I can. Eventually I would like to do hard line water cooling but I don't have the budget for that right now 

Now I have delidded loads of indium soldered CPUs, no reason to do it really, you'd be more likely to break the chip. I use a blow torch to do it, and then some ferric chloride to remove the remains of the indium and other metals off the die, I get my desoldered delids to be shiny like a fresh die, but there is no need for air or liquid cooling, and not always a reason even on LN2.

Yours faithfully

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, WhisperingKnickers said:

In that case that is really disappointing. In your opinion as far as air cooling goes is it ever worth it to delid? I haven't built it yet but I am planning on overclocking a x5690 and I would like to be able to do it on air if I can. Eventually I would like to do hard line water cooling but I don't have the budget for that right now 

Well, if you want to go as far as possible the recommendation for an unlocked CPU of any variant is probably still quite valid, given that most chips start getting more difficult at ~210-220 BCLK...

Xeon e5649@4.4 GHz on Asus Rampage II Extreme or Gigabyte x58a-OC (whatever I feel like to set up at a time) , 6x4 GB Kingston HyperX 1600, Gainward GTX 670 Phantom, Samsung 840 Evo 240 GB, BeQuiet L8 530W

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Ground said:

Well, if you want to go as far as possible the recommendation for an unlocked CPU of any variant is probably still quite valid, given that most chips start getting more difficult at ~210-220 BCLK...

But think of the cool factor :P I want to keep my 5690 theme and I am planning to do glass tubing

⬇ - PC specs down below - ⬇

 

The Impossibox

CPU: (x2) Xeon X5690 12c/24t (6c/12t per cpu)

Motherboard: EVGA Super Record 2 (SR-2)

RAM: 48Gb (12x4gb) server DDR3 ECC

GPU: MSI GTX 1060 Gaming X 6GB

Case: Modded Lian-LI PC-08

Storage: Samsung 850 EVO 500Gb and a 2Tb HDD

PSU: 1000W something or other I forget

Display(s): 24" Acer G246HL

Cooling: (x2) Corsair H100i v2

Keyboard: Corsair Gaming K70 LUX RGB MX Browns

Mouse: Logitech G600

Headphones: Sennheiser HD558

Operating System: Windows 10 Pro

 

Folding info so I don't lose it: 

WhisperingKnickers

 

Join us on the x58 page it is awesome!

x58 Fan Page

 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, Lord Nicoll said:

Now I have delidded loads of indium soldered CPUs, no reason to do it really, you'd be more likely to break the chip. I use a blow torch to do it, and then some ferric chloride to remove the remains of the indium and other metals off the die, I get my desoldered delids to be shiny like a fresh die, but there is no need for air or liquid cooling, and not always a reason even on LN2.

Okay cool thanks, that is good to know. I had considered it but it doesn't sound like it will be necessary which is kind of nice because that is extra work that I no longer have to do

⬇ - PC specs down below - ⬇

 

The Impossibox

CPU: (x2) Xeon X5690 12c/24t (6c/12t per cpu)

Motherboard: EVGA Super Record 2 (SR-2)

RAM: 48Gb (12x4gb) server DDR3 ECC

GPU: MSI GTX 1060 Gaming X 6GB

Case: Modded Lian-LI PC-08

Storage: Samsung 850 EVO 500Gb and a 2Tb HDD

PSU: 1000W something or other I forget

Display(s): 24" Acer G246HL

Cooling: (x2) Corsair H100i v2

Keyboard: Corsair Gaming K70 LUX RGB MX Browns

Mouse: Logitech G600

Headphones: Sennheiser HD558

Operating System: Windows 10 Pro

 

Folding info so I don't lose it: 

WhisperingKnickers

 

Join us on the x58 page it is awesome!

x58 Fan Page

 

Link to comment
Share on other sites

Link to post
Share on other sites

Alrighty, gonna type out my Xeon rig story. @WhisperingKnickers is the one who got me into this. 

 

CPU: Xeon X5675, came with the;

Mobo: Rampge III Formula, got it from a guy on eBay who @WhisperingKnickers pointed me to, who luckily for me lives in Nashville. So I drove through terrible traffic, ran a red light, drove around the mall for 30 minutes looking for a parking spot (only to find there were two massive parking garages behind it...), walked past all the lingerie shops (ew), got the the shop where he was meeting his GF, and exchanged $150 for the mobo and CPU. Also got to go to my first Microsoft Store (and the Apple store for like 5 minutes), so it made the drive worthwhile. Oh, and ate at Panera bread and grabbed a Starbucks coffee for the drive home. 

 

Cooler: Gammax 400 From Newegg

 

GPU: MSI Gaming 980 Ti 6G. Was gonna buy it from a guy on Craigslist, he got another buyer, but that buyer dumped him. Though by that time, I was buying an EVGA 1070 SC, but that guy pulled a no show and left me at Starbucks where we were supposed to meet. So quickly texted 980 Ti Dude, he was about 30 minutes away, so I went over and picked up this beauty, not even dusty, looked like it’d never been used (had tho, he just takes good care of his cards). 

 

RAM: 8GB of Crucial Ballistix RAM my dad had left over from an uncompleted computer revamp project, 8GB of ADATA XPG V1.0 (from @Vernw3 here on the forums), and 16GB of Kinston HyperX Savage (from @clementk)

 

SSD And HDDs: SSD is a Kingston HyperX I got off Newegg, WD Blue is for the same project the Crucial RAM came from, and the other two drives were ones I had lying around. 

 

PSU: M12II Evo 620W off Newegg. May RMA it though, gets super loud under load. 

 

Also, some USB 3.0 card off of Newegg.

 

Case: Enthoo Evolv ATX Tempered Glass. Got it as a last birthday present from my Aunt for my 18th, since I wnt3d something I could use a lot, but not need to replace in a couple years. 

 

And iPhone/iPad glamour pics with lens flare everywhere:

 

0C346788-566C-4A86-821E-7EC85F50D977.thumb.jpeg.a2d8ac05ccf9bb898e4be9eb398e2f14.jpegE7E23A89-4F7F-43F2-9EC4-C8BFB693489C.thumb.jpeg.6bd17be7ab528eeac09325c620cf1fc4.jpeg

 

TL;DR: see the specs in my sig. 

 

Intel HEDT and Server platform enthusiasts: Intel HEDT Xeon/i7 Megathread 

 

Main PC 

CPU: i9 7980XE @4.5GHz/1.22v/-2 AVX offset 

Cooler: EKWB Supremacy Block - custom loop w/360mm +280mm rads 

Motherboard: EVGA X299 Dark 

RAM:4x8GB HyperX Predator DDR4 @3200Mhz CL16 

GPU: Nvidia FE 2060 Super/Corsair HydroX 2070 FE block 

Storage:  1TB MP34 + 1TB 970 Evo + 500GB Atom30 + 250GB 960 Evo 

Optical Drives: LG WH14NS40 

PSU: EVGA 1600W T2 

Case & Fans: Corsair 750D Airflow - 3x Noctua iPPC NF-F12 + 4x Noctua iPPC NF-A14 PWM 

OS: Windows 11

 

Display: LG 27UK650-W (4K 60Hz IPS panel)

Mouse: EVGA X17

Keyboard: Corsair K55 RGB

 

Mobile/Work Devices: 2020 M1 MacBook Air (work computer) - iPhone 13 Pro Max - Apple Watch S3

 

Other Misc Devices: iPod Video (Gen 5.5E, 128GB SD card swap, running Rockbox), Nintendo Switch

Link to comment
Share on other sites

Link to post
Share on other sites

My X58 experience started when a friend gifted me an Asus X58 Sabertooth after giving him a mountain bike. I hemmed and hawed about "upgrading" from my Lenovo i7 2600 K330A Ideacentre. I finally took the plunge and slowly built him up piece by piece, swapping some parts out as the time went by. I had to remove the HDD chassis to make room or the 280mm radiator, as the case was only made to fit a 240. 

 

Here is Black_Knight:

Processor_____ Intel Xeon X5680 @ 4.0GHz
Cooler________ NZXT Kraken X61 (from CM Hyper 212+)
Case_________ Rosewill Stryker M
Memory_______ 24Gb KLEVV DDR3 1600MHz
Motherboard___ Asus Sabertooth X58 
Graphics Card_ MSI GeForce GTX 1080 Armor OC (From Gigabyte Windforce GTX 960 OC)
HDD_________ Toshiba 1tb
PSU_________ SeaSonic G Series SSR-550RM

OS__________ Windows 10 Pro

 

20171003_212354.thumb.jpg.042b39439d9bff5011ef869629c3aae8.jpg

 

20171003_212924.thumb.jpg.5724390c1234b9313a781674077c3612.jpg

 

20171003_212759.thumb.jpg.9effe5b40c7b759cb80bc69af8ca62b5.jpg

 

 

 

 

 

Black Knight-

Ryzen 5 5600, GIGABYTE B550M DS3H, 16Gb Corsair Vengeance LPX 3000mhz, Asrock RX 6800 XT Phantom Gaming,

Seasonic Focus GM 750, Samsung EVO 860 EVO SSD M.2, Intel 660p Series M.2 2280 1TB PCIe NVMe, Linux Mint 20.2 Cinnamon

 

Daughter's Rig;

MSI B450 A Pro, Ryzen 5 3600x, 16GB Corsair Vengeance LPX 3000mhz, Silicon Power A55 512GB SSD, Gigabyte RX 5700 Gaming OC, Corsair CX430

Link to comment
Share on other sites

Link to post
Share on other sites

 

59d47f59888ed_Screenshot(47).thumb.png.3245d4e30e561330ef44922dbc8a6041.png

 

59d47f957104f_Screenshot(45).thumb.png.317255dc200e748adf0b6b8d0c2aaad9.png

 

 

 

Black Knight-

Ryzen 5 5600, GIGABYTE B550M DS3H, 16Gb Corsair Vengeance LPX 3000mhz, Asrock RX 6800 XT Phantom Gaming,

Seasonic Focus GM 750, Samsung EVO 860 EVO SSD M.2, Intel 660p Series M.2 2280 1TB PCIe NVMe, Linux Mint 20.2 Cinnamon

 

Daughter's Rig;

MSI B450 A Pro, Ryzen 5 3600x, 16GB Corsair Vengeance LPX 3000mhz, Silicon Power A55 512GB SSD, Gigabyte RX 5700 Gaming OC, Corsair CX430

Link to comment
Share on other sites

Link to post
Share on other sites

The system was only doing this

 

20170927_212338.thumb.jpg.54d7617397e7af514ee148c18b36e070.jpg

 

While doing this

20170927_212301.thumb.jpg.8476750e9c694f7a9f1533005658acc6.jpg

 

 

Black Knight-

Ryzen 5 5600, GIGABYTE B550M DS3H, 16Gb Corsair Vengeance LPX 3000mhz, Asrock RX 6800 XT Phantom Gaming,

Seasonic Focus GM 750, Samsung EVO 860 EVO SSD M.2, Intel 660p Series M.2 2280 1TB PCIe NVMe, Linux Mint 20.2 Cinnamon

 

Daughter's Rig;

MSI B450 A Pro, Ryzen 5 3600x, 16GB Corsair Vengeance LPX 3000mhz, Silicon Power A55 512GB SSD, Gigabyte RX 5700 Gaming OC, Corsair CX430

Link to comment
Share on other sites

Link to post
Share on other sites

I have a game server running off a 6 core xeon LGA 1366 overclocked to 4.3Ghz stable with ram around 1600Mhz and L3 cache running almost as fast as L2 cache giving a huge performance boost. I also use ECC ram as they are much better when doing bus overclocking but you cant get them cheap anymore :(. It is aircooled using a low profile cooler sitting in a 2U case.

 

I guess i'll post pics when my server arrives back.

 

If anyone has a working evga motherboard thats dual socket, i'd like to have it. 2 6 core xeons can be overclocked on that to give you 4+Ghz of 12 core goodness for cheap and fit 12 DIMMs for all the ram you need with support for ECC registered for massive ram amounts.

Link to comment
Share on other sites

Link to post
Share on other sites

I decided why not. 4.5Ghz 180 BCLK at 25x

59d491697a14b_Screenshot(48).thumb.png.68526b88af23f603b7c06b071658f8e1.png

Black Knight-

Ryzen 5 5600, GIGABYTE B550M DS3H, 16Gb Corsair Vengeance LPX 3000mhz, Asrock RX 6800 XT Phantom Gaming,

Seasonic Focus GM 750, Samsung EVO 860 EVO SSD M.2, Intel 660p Series M.2 2280 1TB PCIe NVMe, Linux Mint 20.2 Cinnamon

 

Daughter's Rig;

MSI B450 A Pro, Ryzen 5 3600x, 16GB Corsair Vengeance LPX 3000mhz, Silicon Power A55 512GB SSD, Gigabyte RX 5700 Gaming OC, Corsair CX430

Link to comment
Share on other sites

Link to post
Share on other sites

4 hours ago, asand1 said:

I decided why not. 4.5Ghz 180 BCLK at 25x

59d491697a14b_Screenshot(48).thumb.png.68526b88af23f603b7c06b071658f8e1.png

did you adjust the other timings like QPI and such and get your L3 cache to run almost the speed of your L2 cache?

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, asand1 said:

The system was only doing this

-snip-

While doing this

-snip-

 

 

 

Wow. I do always tell people a Xeon is really just an i7 extreme edition (at least on LGA1366, IDK about the new ones), just higher binned so they run smoother and better. They’re made for 24/7 use after all. 

Intel HEDT and Server platform enthusiasts: Intel HEDT Xeon/i7 Megathread 

 

Main PC 

CPU: i9 7980XE @4.5GHz/1.22v/-2 AVX offset 

Cooler: EKWB Supremacy Block - custom loop w/360mm +280mm rads 

Motherboard: EVGA X299 Dark 

RAM:4x8GB HyperX Predator DDR4 @3200Mhz CL16 

GPU: Nvidia FE 2060 Super/Corsair HydroX 2070 FE block 

Storage:  1TB MP34 + 1TB 970 Evo + 500GB Atom30 + 250GB 960 Evo 

Optical Drives: LG WH14NS40 

PSU: EVGA 1600W T2 

Case & Fans: Corsair 750D Airflow - 3x Noctua iPPC NF-F12 + 4x Noctua iPPC NF-A14 PWM 

OS: Windows 11

 

Display: LG 27UK650-W (4K 60Hz IPS panel)

Mouse: EVGA X17

Keyboard: Corsair K55 RGB

 

Mobile/Work Devices: 2020 M1 MacBook Air (work computer) - iPhone 13 Pro Max - Apple Watch S3

 

Other Misc Devices: iPod Video (Gen 5.5E, 128GB SD card swap, running Rockbox), Nintendo Switch

Link to comment
Share on other sites

Link to post
Share on other sites

i heard if you pass 200 BLCK you get huge performance increase. Anyone tested this yet?

Sadly my gigabyte board which had a massive chipset cooler had a broken CPU socket. Such as waste as i was planning to make it a file server with its 10 sata slots and 4 PCie x16 slots.

Link to comment
Share on other sites

Link to post
Share on other sites

25 minutes ago, System Error Message said:

i heard if you pass 200 BLCK you get huge performance increase. Anyone tested this yet?

Sadly my gigabyte board which had a massive chipset cooler had a broken CPU socket. Such as waste as i was planning to make it a file server with its 10 sata slots and 4 PCie x16 slots.

I haven’t. Don’t even know what everything does, so no idea how to OC. 

Intel HEDT and Server platform enthusiasts: Intel HEDT Xeon/i7 Megathread 

 

Main PC 

CPU: i9 7980XE @4.5GHz/1.22v/-2 AVX offset 

Cooler: EKWB Supremacy Block - custom loop w/360mm +280mm rads 

Motherboard: EVGA X299 Dark 

RAM:4x8GB HyperX Predator DDR4 @3200Mhz CL16 

GPU: Nvidia FE 2060 Super/Corsair HydroX 2070 FE block 

Storage:  1TB MP34 + 1TB 970 Evo + 500GB Atom30 + 250GB 960 Evo 

Optical Drives: LG WH14NS40 

PSU: EVGA 1600W T2 

Case & Fans: Corsair 750D Airflow - 3x Noctua iPPC NF-F12 + 4x Noctua iPPC NF-A14 PWM 

OS: Windows 11

 

Display: LG 27UK650-W (4K 60Hz IPS panel)

Mouse: EVGA X17

Keyboard: Corsair K55 RGB

 

Mobile/Work Devices: 2020 M1 MacBook Air (work computer) - iPhone 13 Pro Max - Apple Watch S3

 

Other Misc Devices: iPod Video (Gen 5.5E, 128GB SD card swap, running Rockbox), Nintendo Switch

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Zando Bob said:

I haven’t. Don’t even know what everything does, so no idea how to OC. 

its really simple, there are old guides still out there and i once made a twitch video that expired on OCing that platform.

I think you have 3 speeds to worry about. The first is your ram, to OC high i set my ram speeds to minimum frequency. You should also lock all other speeds too.

You then have to overclock the BLCK which increases the bus and ram frequency, but you also have to balance that overclock with your cache speeds (its called a couple of things among different boards but has to be 2x the speed of ram for 45nm iseries, 1.5x speed of ram for 32nm, but the higher you get this the faster your CPU as this is the L3 cache that you're overclocking).

You can also overclock QPI too, but when you overclock BLCK this will overclock too so set this lower. Obviously a higher QPI speed is beneficial especially if you have the evga dual lga 1366 board.

I might have missed another frequency.

As for voltages there are 3 voltages you have to worry about.

Vcore

VTT (ram controller i think)

chipset voltage.

 

I recommend asus for lga 1366 overclocking.

Link to comment
Share on other sites

Link to post
Share on other sites

31 minutes ago, System Error Message said:

i heard if you pass 200 BLCK you get huge performance increase. Anyone tested this yet?

Sadly my gigabyte board which had a massive chipset cooler had a broken CPU socket. Such as waste as i was planning to make it a file server with its 10 sata slots and 4 PCie x16 slots.

Well, if you pass 200 MHz BCLK your Clockspeed will go up (if you keep the multiplier up), same for RAM QPI and everything. I'm running at 221 BCLK, but it should be linear if I were to guess.

nnhtOHP.jpg

Clockspeeds here are a bit all over the place with turbo, but if all cores are used it runs at 4.2 GHz. 

 

The highest report for BCLK speed on my board I've heard so far is 273, the highest I've managed is 240, though I want to try to beat that once my L5640 arrives. Pretty good for one of the cheapest x58 boards (btw, has anyone else here tried the e Xeons? Maybe they generally overclock better? Might be worth a try ;)

Xeon e5649@4.4 GHz on Asus Rampage II Extreme or Gigabyte x58a-OC (whatever I feel like to set up at a time) , 6x4 GB Kingston HyperX 1600, Gainward GTX 670 Phantom, Samsung 840 Evo 240 GB, BeQuiet L8 530W

Link to comment
Share on other sites

Link to post
Share on other sites

11 minutes ago, System Error Message said:

its really simple, there are old guides still out there and i once made a twitch video that expired on OCing that platform.

I think you have 3 speeds to worry about. The first is your ram, to OC high i set my ram speeds to minimum frequency. You should also lock all other speeds too.

You then have to overclock the BLCK which increases the bus and ram frequency, but you also have to balance that overclock with your cache speeds (its called a couple of things among different boards but has to be 2x the speed of ram for 45nm iseries, 1.5x speed of ram for 32nm, but the higher you get this the faster your CPU as this is the L3 cache that you're overclocking).

You can also overclock QPI too, but when you overclock BLCK this will overclock too so set this lower. Obviously a higher QPI speed is beneficial especially if you have the evga dual lga 1366 board.

I might have missed another frequency.

As for voltages there are 3 voltages you have to worry about.

Vcore

VTT (ram controller i think)

chipset voltage.

 

I recommend asus for lga 1366 overclocking.

K... got my project for after work then! And I have an ASUS Rampage III Formula, so I should be good there. 

Intel HEDT and Server platform enthusiasts: Intel HEDT Xeon/i7 Megathread 

 

Main PC 

CPU: i9 7980XE @4.5GHz/1.22v/-2 AVX offset 

Cooler: EKWB Supremacy Block - custom loop w/360mm +280mm rads 

Motherboard: EVGA X299 Dark 

RAM:4x8GB HyperX Predator DDR4 @3200Mhz CL16 

GPU: Nvidia FE 2060 Super/Corsair HydroX 2070 FE block 

Storage:  1TB MP34 + 1TB 970 Evo + 500GB Atom30 + 250GB 960 Evo 

Optical Drives: LG WH14NS40 

PSU: EVGA 1600W T2 

Case & Fans: Corsair 750D Airflow - 3x Noctua iPPC NF-F12 + 4x Noctua iPPC NF-A14 PWM 

OS: Windows 11

 

Display: LG 27UK650-W (4K 60Hz IPS panel)

Mouse: EVGA X17

Keyboard: Corsair K55 RGB

 

Mobile/Work Devices: 2020 M1 MacBook Air (work computer) - iPhone 13 Pro Max - Apple Watch S3

 

Other Misc Devices: iPod Video (Gen 5.5E, 128GB SD card swap, running Rockbox), Nintendo Switch

Link to comment
Share on other sites

Link to post
Share on other sites

14 hours ago, Lord Nicoll said:

I have no idea how or why Linus needed phase change for the i7 4790K on 1.4v for 5GHz, he didn't even delid it, complete waste of time. I could have probably gotten 5.2GHz on almost 10°C full load temps with a cooler like that with a delid and Kyronaut. 

It was pitiful. He used a brand new, top of the line SS but in his mind he was using an air cooler so he got air cooler results.

 

.

Link to comment
Share on other sites

Link to post
Share on other sites

@System Error Message 1.4v, 150BLCK, everything else as low as it goes (the BLCK OC bumped it up automatically), and it's running at 3.46GHz. Only had 5-10 minutes, so I'll have to try pushing it harder after work. What's a safe voltage for my CPU (It says the max is 2.3v in the BIOS, but that may damage the CPU, and I believe it :o)?

Intel HEDT and Server platform enthusiasts: Intel HEDT Xeon/i7 Megathread 

 

Main PC 

CPU: i9 7980XE @4.5GHz/1.22v/-2 AVX offset 

Cooler: EKWB Supremacy Block - custom loop w/360mm +280mm rads 

Motherboard: EVGA X299 Dark 

RAM:4x8GB HyperX Predator DDR4 @3200Mhz CL16 

GPU: Nvidia FE 2060 Super/Corsair HydroX 2070 FE block 

Storage:  1TB MP34 + 1TB 970 Evo + 500GB Atom30 + 250GB 960 Evo 

Optical Drives: LG WH14NS40 

PSU: EVGA 1600W T2 

Case & Fans: Corsair 750D Airflow - 3x Noctua iPPC NF-F12 + 4x Noctua iPPC NF-A14 PWM 

OS: Windows 11

 

Display: LG 27UK650-W (4K 60Hz IPS panel)

Mouse: EVGA X17

Keyboard: Corsair K55 RGB

 

Mobile/Work Devices: 2020 M1 MacBook Air (work computer) - iPhone 13 Pro Max - Apple Watch S3

 

Other Misc Devices: iPod Video (Gen 5.5E, 128GB SD card swap, running Rockbox), Nintendo Switch

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Zando Bob said:

@System Error Message 1.4v, 150BLCK, everything else as low as it goes (the BLCK OC bumped it up automatically), and it's running at 3.46GHz. Only had 5-10 minutes, so I'll have to try pushing it harder after work. What's a safe voltage for my CPU (It says the max is 2.3v in the BIOS, but that may damage the CPU, and I believe it :o)?

CPU max save voltage is 1.35 i believe, or maybe 1.42V. I think it is mentioned on intel's own site as i checked there.

 

As for the other voltages its safe to put them higher. Theres a voltage you have to set somewhere i cant remember but it helps the BLCK to clock higher and CPU too much easier.

 

For any CPU it will disintegrate at a certain voltage (like 1.8V for pentium 4s), so just stick to the safe voltage said by intel and you should be fine.

 

Make sure your temps stay below 80C.

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, System Error Message said:

CPU max save voltage is 1.35 i believe, or maybe 1.42V. I think it is mentioned on intel's own site as i checked there.

 

As for the other voltages its safe to put them higher. Theres a voltage you have to set somewhere i cant remember but it helps the BLCK to clock higher and CPU too much easier.

 

For any CPU it will disintegrate at a certain voltage (like 1.8V for pentium 4s), so just stick to the safe voltage said by intel and you should be fine.

 

Make sure your temps stay below 80C.

Ok, I'll google up that voltage. And staying below 80C shouldn't be too hard, it maxes at a little below 60 at stock.

Intel HEDT and Server platform enthusiasts: Intel HEDT Xeon/i7 Megathread 

 

Main PC 

CPU: i9 7980XE @4.5GHz/1.22v/-2 AVX offset 

Cooler: EKWB Supremacy Block - custom loop w/360mm +280mm rads 

Motherboard: EVGA X299 Dark 

RAM:4x8GB HyperX Predator DDR4 @3200Mhz CL16 

GPU: Nvidia FE 2060 Super/Corsair HydroX 2070 FE block 

Storage:  1TB MP34 + 1TB 970 Evo + 500GB Atom30 + 250GB 960 Evo 

Optical Drives: LG WH14NS40 

PSU: EVGA 1600W T2 

Case & Fans: Corsair 750D Airflow - 3x Noctua iPPC NF-F12 + 4x Noctua iPPC NF-A14 PWM 

OS: Windows 11

 

Display: LG 27UK650-W (4K 60Hz IPS panel)

Mouse: EVGA X17

Keyboard: Corsair K55 RGB

 

Mobile/Work Devices: 2020 M1 MacBook Air (work computer) - iPhone 13 Pro Max - Apple Watch S3

 

Other Misc Devices: iPod Video (Gen 5.5E, 128GB SD card swap, running Rockbox), Nintendo Switch

Link to comment
Share on other sites

Link to post
Share on other sites

I'm back on X58 so what's the highest overclocking Xeon that's under $20? I need a i7 920 and 980X for hwbot points but I want some Xeons for fun just bought this 

Capture+_2017-10-03-17-24-49.png

.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×