help :D

[Bayron]

so i have asrock a320m-dgs mb whit ddr4 ram and i bought Samsung 8GB 2133Mhz 15CL DDR4  but it dont wanna fit 

is this ram not suporrted? 

[yathis]

Is the ram stick in the right way?

 

[Bayron]

1 minute ago, yathis said:

Is the ram stick in the right way?

 

yes and the hole mach up too

[yathis]

does the slot match up?

 

1 minute ago, Bayron said:

yes and the hole mach up too

 

[Bayron]

1 minute ago, yathis said:

does the slot match up?

 

 

yes its gose like half in and that just stucks

[ImNotThere]

there is force needed to put ram in just press a lil harder

[yathis]

You need need to force it in

[Bayron]

1 minute ago, ImNotThere said:

there is force needed to put ram in just press a lil harder

tryed and the sound of it i dont like  so i stoped

[paddy-stone]

do not use pliers... FFS

 

Make sure you have the ram the correct way round.

open the catch(es) on the ram socket.

line up the ram with the slot notches.

[Bayron]

1 minute ago, paddy-stone said:

do not use pliers... FFS

 

Make sure you have the ram the correct way round.

open the catch(es) on the ram socket.

line up the ram with the slot notches.

everything is done and still nothing if i press harder i think it will brake

[paddy-stone]

OK, you have to angle the ram a little, so slide it in the end with the open catch first, when it's a little way down, start sliding the fixed catch end down, then when it's nearly to where the connector goes, level it out so that both ends are level when you try to push it in the slot.

 

Watch a youtube vid if not sure, it's pretty easy when you get the hang of it.

[Bayron]

3 minutes ago, paddy-stone said:

OK, you have to angle the ram a little, so slide it in the end with the open catch first, when it's a little way down, start sliding the fixed catch end down, then when it's nearly to where the connector goes, level it out so that both ends are level when you try to push it in the slot.

 

Watch a youtube vid if not sure, it's pretty easy when you get the hang of it.

i did it

tnx guys

[paddy-stone]

Just now, Bayron said:

i did it

tnx guys

No problem... always better to ask than risk screwing somehting up.. ahve fun with your PC