new pc, (FIRST BOOT UP) monitor says no signal, tried a tv and other monitors.

[hellal54]

ok, as the title suggests i have a built a new pc, and i cannot seem to find the motherboard speaker socket so i can plug in a motherboard speaker and find out why my monitor says 'no signal'. i have tried pretty much the basics, but not all. such as reseating. here is a link to the manual of the motherboard: http://asrock.pc.cdn.bitgravity.com/Manual/QIG/A320M-HD...

thanks. (FIRST BUILD BTW, GO EASY ON ME)

 

BUILD:

Motherboard: ASROCK A320M-HDV

 

CPU: AMD Ryzen 5 1400 GPU: Gigabyte GeForce GTX 1060 Windforce OC, 3GB GDDR5

 

RAM: Kingston ValueRAM 8GB (1x8GB), PC4-2400 (2400MHz) DDR4

 

STORAGE: Western Digital WD 1TB Blue, SATA III, 7200RPM, 64MB

 

CASE (with PSU): Thermaltake Versa H15 Black Micro ATX Gaming Case, 450W PSU, 1x USB3, 1x USB2, HD Audio, 120mm Fan (THE MODEL INCASE YOU NEED TO INSPECT THE PSU IS:CA-3D4-45S1NA-00)

[Trekt Nation]

Where did you plug your display out cable into? 

[Dwwop]

First of all, after you start the Pc, are the fans spining? Make sure  that all the wires are plugged correctly to the MoBo. Did you try to plug it to another port, use any other wire? Are you plugging monitor to the GC? If yes and it can't recognize it, try to plug it to the Mobo. Also try to plug Ram to another dimm slot. 

[BestPCBuilder2017]

Any error codes? 

[hellal54]

i plugged vga, and hmdi one at a time, both did not work.

 

also all the fans where spinning. i reseated and made sure everything is plugged in.

and i tried plugging into both the mobo and gpu.

 

[BestPCBuilder2017]

Can you upload pictures 

[hellal54]

i need an motherboard speaker to find out about error codes. and i cant find the motherboard speaker port for it :()

 

[Dwwop]

Just now, NCIX Lampy said:

Any error codes? 

I don't think that he can see any errors, if the monitor can't rocognize the PC

[hellal54]

i wish i could upload pics, but its my freinds pc, and so its at his house at the moment

but here is a diagram of the motherboard.

[BestPCBuilder2017]

Just now, Dwwop said:

I don't think that he can see any errors, if the monitor can't rocognize the PC

Motherboards can display error codes. 

[Trekt Nation]

1 minute ago, NCIX Lampy said:

Motherboards can display error codes. 

where?

[BestPCBuilder2017]

2 minutes ago, hellal54 said:

i wish i could upload pics, but its my freinds pc, and so its at his house at the moment

but here is a diagram of the motherboard.

Did you try changing display outputs on the monitor? 

[hellal54]

i tired vga and hdmi

 

one sec for the diagram

 

[BestPCBuilder2017]

1 minute ago, hellal54 said:

i tired vga and hdmi

 

one sec for the diagram

 

Did you use the monitor's interface such as hardware buttons to bring up the menus for switching outputs 

[hellal54]

it is on page 1

 

i also tried different cables and monitors

A320M-HDV_multiQIG.pdf

[hellal54]

yep, i also tried changing outputs

[BestPCBuilder2017]

You have the 4 pin power plugged in as well, right? 

[hellal54]

Just now, NCIX Lampy said:

You have the 4 pin power plugged in as well, right? 

my psu came with an 8 pin, so i split it, and tried both.

[hellal54]

the psu came with the chassis

[BestPCBuilder2017]

1 minute ago, hellal54 said:

my psu came with an 8 pin, so i split it, and tried both.

Like one of these? http://data.stuartconnections.com/object/image?p=10963&i=1

[hellal54]

the split part only, the the bottom part of the image goes directly to the psu. but yest it looks like that