Singularity Computrers Reservoir and Accessories Preview

[KeepItCool]

Singularity Computers Core Mount comes in 2 pack (Available in variety different colours)

Assembling is very straight forward. Removes the screw from the 4 handles. Allign them and just screw them together.

Next screw the back bracket

Now lets have a look at singularity computers reservoir and its accessories

The reservoir box have measurements of the reservoir which is helpful in case u wan to refer to the dimensions

Once open the box you are greeted with singularity computers stop fittings

Reservoir is placed inside a protective plastic cover

The beauty about this res after u dismantle the the black ring u can move the top facing any direction you want. Remove the top and there is a white o ring to go with the frosted top.

Once u fix a position. U can just screw down the black ring to hold its position.

Same goes to the bottom

Now lets have a look at the D5 top (Frosted version)

U will see the top is packaged in an anti static bag

Come with a white oring and some screws that can be used to mount the top. (Bottom VIEW)

Top VIew

Can be used as a standalone unit or can be used as an upgrade kit with existing protium res to make it into a single unit.

To use it with protium res just unscrew the top unit. There is an oring inside that u dont have to remove. Leave it as it is.

To mount protium res to the d5 top. Remove the bottom unit and attached it with the top. Before that unscrew the flow channel tube and screw it to the d5 top

Keeps the rest of these accessories save back into the box if u wanted to use it back in the future

After combining the res and d5 top

Next is the D5 cover. Is covered in the anti static bag once u opened the box

Inside you have the D5 cover and bottom plate. The rubber which is provided is removed and placed on the plate which helps to cushion the d5.

Once assembled with the res of the unit

To use the reservoir core mount to mount the res to the radiator are as follows.

FInd the small screws which can be find in the radiator box that you have bought.

Use these screw and mount the core to the radiator. If u dont have these small screws. Just get them from ur local hardware shop.

 

Next remove the 4 screws holding the core highlighted in yellow and place the res u prefer and screw it back.

Fully assembled

Last but not least for the protium d5 cover. Due to its modular design. If u have a manual pump and u want to change the speed. U can just remove the bottom cover without the need to bleed the entire loop and remove the cover.

Thanks for having a look.

 

A very modular design for this reservoir and the accessories. Enthusiast or even beginners will love this. Current offerings by ekwb, bitspower or alphacool have limitation and arent this flexible in design. Not to mention the quality is solid due to aluminium cnc parts. The frosted version looks incredible but they also offer other choice like polished aryclic and acetal.

 

 

 

 

 

[Spudnic]

I must admit the guy who runs the company is a very, very talented indervidual. 

 

If you are ever looking for ideas, inspiration or one of the best custom computers you can buy, this company/YouTube channel is where you should go!

 

I am very eager to see what products come next. 

[KeepItCool]

18 minutes ago, Spudnic said:

I must admit the guy who runs the company is a very, very talented indervidual. 

 

If you are ever looking for ideas, inspiration or one of the best custom computers you can buy, this company/YouTube channel is where you should go!

 

I am very eager to see what products come next. 

True. I always continue to support them. Wt they currently have and going to offer soon are some amazing stuff. I see them as a genuine competitor in wtc market. If wt they have is better then we can see enthusiast soon using their products in more build. 

[Tsuki]

looks like an unboxing? no actual review of it? sure its pretty, but does it perform?

honestly this just looks like an image heavy advertisement.

[KeepItCool]

34 minutes ago, Tsuki said:

looks like an unboxing? no actual review of it? sure its pretty, but does it perform?

honestly this just looks like an image heavy advertisement.

Sorry I did mention in the tittle it's just a preview not review. It's not easy to make a proper review unless a have a wtc rig standby to explain from scratch in detail since it's no point reviewing it on a open test bench. I just made this post to show the assemble process and the differences compare to conventional res. I'm in works in making a proper review so till then pls dont jump to conclusion. 

[mikeeginger]

Cool to see some one review some singularity computers  parts

[Marinatall_Ironside]

If y'all want to check out his channel (I've been subscribed to him for well over a year or two now), here it is.

 

https://www.youtube.com/channel/UCqChlb8y4cQ0jAFaNFPQLqA

 

He builds some of the most incredible systems I have ever seen! And his products scream quality, and I would love to get my hands on them.