Avermedia lgp Lite

PovilJ · March 24, 2017

Hello, so I bought Avermedia LGP Lite and connected to my pc and there is a problem with video output as the smaller text feels blurry. You can see the differences in photos. As there is kind a yellowish outlines. Is it possible to fix it?

samcool55 · March 24, 2017

Is this what you see from the HDMI-out port?

If this is the recorded footage it's normal because there's compression.

If it's from the HDMI-out i honestly don't know why that happens...

Is it still runnning at the same resolution, refresh rate and color depth?

PovilJ · March 24, 2017

3 minutes ago, samcool55 said:

Is this what you see from the HDMI-out port?

If this is the recorded footage it's normal because there's compression.

If it's from the HDMI-out i honestly don't know why that happens...

Is it still runnning at the same resolution, refresh rate and color depth?

This is the signal from output. Yea running 1080p 60hz

samcool55 · March 25, 2017

I'm a bit confused tbh, it's also just the text and not the icons.

Maybe there's some form of compression or something causing it, i honestly don't have a clue how to fix it.

I would just live with it tbh... In the end it's a cheap capture card....

Raimond56 · March 31, 2017

Hey I have the same problem

Did you find a solution for this ?

PovilJ · March 31, 2017

10 hours ago, Raimond56 said:

Hey I have the same problem

Did you find a solution for this ?

Nop returned it.. Will try to do it over LAN or maybe buy something better

Raimond56 · April 5, 2017

On 31/03/2017 at 8:51 PM, PovilJ said:

Nop returned it.. Will try to do it over LAN or maybe buy something better

Btw I did ticked to the support and found out that LGP Lite uses pixel format standard YUV 4:2:2 so when I tried to fix problem my graphics card runs standard YCbCr 4:4:4 and I tried to use RGP 4:4:4 standard(full RGP) and it didn't help, but since I know now it uses YUV 4:2:2 I turned my graphics card settings to YCbCr 4:2:2 and it fixed that problem.