Jump to content

Is this the best choice??

Kenshin1870
By Kenshin1870
in Cooling
 Share
Posted

I have a Cooler Masters Haf X Full tower with all the factory fans plus a 200mm that doens't include out of the box on the top.

I have a i5 6700k, with a corsair h100i gtx.

As you can see, i have the 2 cooler mastes, them the radiator and finally the 2 fans from corsair, everybody is pulling out air. Is this a good choice? In my town there is a lot wings with dust, that dust is for just from one week.

16710246_1341040022601394_882781427_o.jpg

16667682_1341039982601398_1377003791_o.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

No, i just mean those 4 of the picture, in total there is 3 push in (front case, right side of the case and the PSU), and 5 pushing out.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
14 hours ago, Kenshin1870 said:

No, i just mean those 4 of the picture, in total there is 3 push in (front case, right side of the case and the PSU), and 5 pushing out.

Still bit confusing. What GPU cooler style you have? Side is better as exhaust if you are using open-air style cooler. Push-pull on rad counts as 2 exhausts when we are checking on case pressure.

 

If you could list all fans like this:

- 2x 140mm front in

- 1x 120mm side in

- 4x 120mm rad push-pull top out

- 1x 120mm rear out

Will help alot to decipher your setup.

^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Sorry for my english

I have the Corsair H100i Gtx cooling system

 

- 1x 200mm front in

- 1x 200mm side in

- 2x 140mm rad push-pull top out

- 2x 200mm rad push-pull top out

- 1x 120mm rear out

- 1x PSU is inverted so he is push in

- 1x 120mm down, also push in air

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
12 hours ago, Kenshin1870 said:

Sorry for my english

I have the Corsair H100i Gtx cooling system

 

- 1x 200mm front in

- 1x 200mm side in

- 2x 140mm rad push-pull top out

- 2x 200mm rad push-pull top out

- 1x 120mm rear out

- 1x PSU is inverted so he is push in

- 1x 120mm down, also push in air

 

Don't worry about your English. It was just hard to tell what fans and where they are. That should be really close to neutral pressure and if your temps are fine, no need to change anything. You have 2x 200mm intake + 1x 120mm intake (PSU isn't counted when its taking air underneath case). And rad push-pull + rear exhausting.

 

The other of top 200mm's isn't really doing anything, probably sucking some dust from ODD bay covers. So if you want to change something, remove that.

^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
The other of top 200mm's isn't really doing anything, probably sucking some dust from ODD bay covers. So if you want to change something, remove that.

Why is that? They are too slow always?

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×