Planning on painting a case and motherboard, need some advice.

Caminon · February 3, 2017

I'm planning on painting the interior of the EVOLV TG and the IO shroud and PCH heatsink on the Maximus IX Hero. I've seen people paint the whole interior of the Enthoo EVOLV on PCPartPicker but was wondering how to do it and if I would need to break the rivets and re-rivet the interior. In the motherboard's case, I don't want to paint any PCI-e or RAM slots (not gonna pull a Linus,) and I don't want to paint any of the metal on the heatsinks. Painting just a section of the PCH bridge may be a tad tricky, so I also wanted a few tips for that as well.

samiscool51 · February 3, 2017

the case should be easy to paint

a mb isn't

look for a guide on how to paint your mb

look for the exact model as that will improve your chances of not breaking anything

or use a general guide on how to paint your mb

WARNING, DIFFERENT PLASTICS AND PAINTS REACT BADLY, LOOK AND SEE WHAT PLASTICS YOUR MB USES AND FIND OUT WHICH PAINT TYPES REACT TO IT AND DON'T USE THEM!!!!!!!!!!!!!!!!!!!