Jump to content

H100i v2 LOUD

Adisaur
By Adisaur
in Custom Loop and Exotic Cooling
 Share
Posted

Hey guys. I recently built my PC but my H100i v2 has sudden spikes where the fans spin up to 100% for 2 seconds. This is very frustrating and it happened even when my CPU temps are around 27° C (idle). Please help! I haven't even overclocked yet. 

 

i7 6700k

Corsair H100i v2

MSI Z170A M5

Corsair Vengeance LED 8*2

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Stop using the stock fans and buy quiet ones from noctua or bequiet or something. Then connect them to your motherboard fan headers instead of the H100i.

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Read my signature for the fix for the fluctuating fan issue. It's due to AIDA64 (or HWinfo or other monitoring software you might be using) fighting with Link. Easy fix.

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Bequiet Dark Rock Pro 4   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
23 hours ago, Enderman said:

Stop using the stock fans and buy quiet ones from noctua or bequiet or something. Then connect them to your motherboard fan headers instead of the H100i.

 

18 hours ago, pyrojoe34 said:

Read my signature for the fix for the fluctuating fan issue. It's due to AIDA64 (or HWinfo or other monitoring software you might be using) fighting with Link. Easy fix.

I think it's my fan curve. What values would you reccomend?

I tried customising the curve and made it something like this (not overclocked yet):

25*C:26%

32*C:30%

40*C:41%

51*C:53%

63*C:73%

83*C:87%

 

Is this safe/is there something i should change while overclocking?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Did you read my signature? If that's the issue changing the fan curve won't help until you fix the communication issue.

 

The fan curve should be based on the water temp (labeled as H100i temp in Link), NOT the CPU temp. Personally, I aim to keep my max water temp below 50C (which keeps my max OCed CPU temp at 60-62C).

 

I use something like this:

0-35C: 25%

40C: 35%

45C: 45%

48C: 55%

50C: 65%

55C: 90%

 

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Bequiet Dark Rock Pro 4   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
42 minutes ago, pyrojoe34 said:

Did you read my signature? If that's the issue changing the fan curve won't help until you fix the communication issue.

 

The fan curve should be based on the water temp (labeled as H100i temp in Link), NOT the CPU temp. Personally, I aim to keep my max water temp below 50C (which keeps my max OCed CPU temp at 60-62C).

 

I use something like this:

0-35C: 25%

40C: 35%

45C: 45%

48C: 55%

50C: 65%

55C: 90%

 

Yeah I read that. I'm not using any stress tests rn and the software I've downloaded so doesn't conflict 100%. Changing the fan curve has fixed it and like you said, I've now based it off of the water temps.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×