Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[Dabombinable]

23 minutes ago, buzzinkeegs said:

sounds like my old satalite pro

Its just one of the old Compaq CQ60, using Intel's weak iGPU instead of one from Nvidia. Tempted to get the P version of the 9500 (10W less, same price), but the manual only lists the really low end versions. Either way it'll be interesting to see how large the gap ends up being.

[FivePointOh]

E5800 OC from 3.2 to 3.79ghz

[Kizune]

Going embedded (COM Express land here). First entry - Core i7 4700EQ

And here is the module installed and on the table (USB Stick added for size comparison)

 

Second - Weird Xeon-D board (Xeon D-1537)

Again, board on the test stand and on the table:

I think it is some kind of server control module or something - but i'm not sure, will be glad to hear the original purpose of this board. As of myself - i'm looking for some compact carrier board for the Type6 COM Express to create a small (Intel Nuc size) all in one server that i can carry around in my pocket.

[joishw]

On 12/10/2018 at 2:52 PM, joishw said:

And the new build

 

Did some tweaking to the OC and RAM. It's a shame I couldn't get my 4.2 GHz OC daily stable

 

[GMart84]

@Mephi00

 

A little more playing around and some cooling improvements have netted a little more. 

 

Better cooling was simply it only being 18C in the house and adding some better exhaust fans to the back of the case.  Wonder if I pipe in air from outside where it is going to be -44C with windchill tomorrow and then really ramp it up!

[Mephi00]

3 hours ago, GMart84 said:

@Mephi00

 

A little more playing around and some cooling improvements have netted a little more. 

 

Better cooling was simply it only being 18C in the house and adding some better exhaust fans to the back of the case.  Wonder if I pipe in air from outside where it is going to be -44C with windchill tomorrow and then really ramp it up!

Ouch, unfortunately it isnt really cold enough here in Germany to do so.

But I did my best and I may use another week to get my System sorted...

[Steve jovz]

On 10/4/2013 at 3:04 PM, Jumper118 said:

<snip>

 

Edited February 5, 2019 by SansVarnic
Snipped the quotes.

[glenalz81]

On 1/30/2019 at 10:16 AM, Steve jovz said:

<snip>

 

Have a look at some previous posts, Cinebench screenshot with CPU-Z open showing your CPU frequency.

 

That'll do, no need to reply to the OP or run the CPU-Z benchmark, other than that, solid effort!

Edited February 5, 2019 by SansVarnic
Snipped the quotes.

[Mephi00]

Hey, I've found another insane one:

 

[GMart84]

Got a few more points out of it!  Now to move on to the 3DMark scores!

[Steve jovz]

12 hours ago, Jumper118 said:

why did you feel the need to quote the whole op? to prove that you cant read? 

Im sorry . I just understanding well this stuff around. Im from portugal and not very good whit english! 

[Jumper118]

2 minutes ago, Steve jovz said:

Im sorry . I just understanding well this stuff around. Im from portugal and not very good whit english! 

that explains it then  but there are lots of examples in the op of what the screen shot should be fairly obvious even for someone what doesnt speak English.  

[Steve jovz]

35 minutes ago, Jumper118 said:

that explains it then  but there are lots of examples in the op of what the screen shot should be fairly obvious even for someone what doesnt speak English.  

What i have to do then?

[Jumper118]

35 minutes ago, Steve jovz said:

What i have to do then?

just like this

 

run r15

open cpuz program x3 with cpu,memory, mainboard

take image of screen

post here.  

[Steve jovz]

31 minutes ago, Jumper118 said:

just like this

 

run r15

open cpuz program x3 with cpu,memory, mainboard

take image of screen

post here.  

Thank you my friend!

[nick name]

7 hours ago, Steve jovz said:

Thank you my friend!

You don't have to open CPU-Z during the run.  Open everything after the run and then screenshot.  

[Sprawlie]

Decided to see if i could push the mhz a bit more than previously.

 

learn to work with memory timings next I think.

 

[The Benjamins]

@Jumper118

Can you add a C15 EXTREME section?

 

HWgeek

Quote

Dear Friends,
I am happy to share with you my small Mod for the Popular R15 benchmark!
As you all know, since AMD ThreadRipper 2990WX came out the CINEBENCH R15 looked too easy for this monster CPU, the Scene Renders too Fast :).
Now we also got the new Intel Xeon W-3175X 28-core and many Overclockers playing with the CR R15 and the current version cannot stress enough those CPU's and the scores fluctuation too much.
So I played with the files of the benchmark and I force it to render X4 Times the resolution! 
Plus, I edited the textures to make this "R15 EXTREME MOD".
Now the Render times is over 80 seconds vs around 25 seconds on stock Ryzen 7 2700X (new score around 430 vs 1700)!

P.S: More accurate Notebook CPU's benchmark scores:
with this Mod you can better evaluate Notebook CPU's performance since even with single run you can throttle the CPU clocks unlike the Original CB R15 that finishes too quickly.

___________How to Apply the MOD? __________
Just Replace the original "plugins" folder inside "CINEBENCH R15.038_RC184115" with my modded "plugins" folder.
Download: (Updated the Logo Image)
https://ufile.io/54jfb
_____________________________________________________________
Now We are Ready for the Next ThreadRipper and Ryzen Generation!
_____________________________________________________________

Enjoy and please share your scores with the community :).
Enjoy!
HwGeek.
 

https://forums.guru3d.com/threads/ann-cinebench-r15-extreme-unofficial-mod-for-the-community-to-stress-hedt-platforms.425161/

 

That picture shows my old test with c15 on my Xeon D 1541 (already in the doc), and the just retested on the EXTREME version. 

Spoiler

 

[Jumper118]

23 hours ago, The Benjamins said:

@Jumper118

Can you add a C15 EXTREME section?

 

HWgeek

https://forums.guru3d.com/threads/ann-cinebench-r15-extreme-unofficial-mod-for-the-community-to-stress-hedt-platforms.425161/

 

That picture shows my old test with c15 on my Xeon D 1541 (already in the doc), and the just retested on the EXTREME version. 

  Reveal hidden contents

 

Yes, I will add it once i get to here updated.  I have put this benchmark on hwbot as well. Great find sir. 

[Pasi123]

Cinebench R15 Extreme on my Xeon X5670 @ 4.32GHz

 

[spuntheone]

See if I did this right, tried to stick to as close to the example as I humanly could. This is my main Rig that is on its last days, but still does me good with performance and reliability. Well, until I see this thread earlier today and try to overclock my 4690k one multiplier to 44. restart, no post. Bah, had to extract my tower from the cave it usually lives in, to reset the cmos. Had to take out my new rx580 to get to the jumper and battery. Still wouldnt post after that, decided to turn off/unplug inside case lights and a couple cathode tubes I have hooked up to my monitors. Posted after that, set all bios settings back to the REGULAR settings and did a final run on cinebench, just happy to be able to use my computer for the day. Oh wow I just wrote a whole novel, thanks for getting this far, ha. Cheers 

[Jumper118]

30 minutes ago, spuntheone said:

See if I did this right, tried to stick to as close to the example as I humanly could. This is my main Rig that is on its last days, but still does me good with performance and reliability. Well, until I see this thread earlier today and try to overclock my 4690k one multiplier to 44. restart, no post. Bah, had to extract my tower from the cave it usually lives in, to reset the cmos. Had to take out my new rx580 to get to the jumper and battery. Still wouldnt post after that, decided to turn off/unplug inside case lights and a couple cathode tubes I have hooked up to my monitors. Posted after that, set all bios settings back to the REGULAR settings and did a final run on cinebench, just happy to be able to use my computer for the day. Oh wow I just wrote a whole novel, thanks for getting this far, ha. Cheers 

 

yes that is correct, but why is the cpu voltage at 1.76v?

[spuntheone]

4 hours ago, Jumper118 said:

yes that is correct, but why is the cpu voltage at 1.76v?

I think the reading is wrong. However I am using a K chip on a cheap non-overclocking mobo. Same board but using a G3258 it said I was at 0.100 vcore or something ludacris. Believe it is near 1.2 at least what XTU says:

[Jumper118]

5 hours ago, spuntheone said:

I think the reading is wrong. However I am using a K chip on a cheap non-overclocking mobo. Same board but using a G3258 it said I was at 0.100 vcore or something ludacris. Believe it is near 1.2 at least what XTU says:

 

ok. thats good then

[Tech Wizard]

Casual 24/7 daily settings on X79. Might go hard when there's a chart up