Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[danakahawkeye]

Here is my scores, would have probably been better if I closed down all the apps running and my 2nd and 3rd monitor.

[Tech Wizard]

Just now, danakahawkeye said:

Here is my scores, would have probably been better if I closed down all the apps running and my 2nd and 3rd monitor.

Man, you're losing to a stock 3930K... Overclock that chip, and close all background applications

[Overl0rd]

21 hours ago, Jumper118 said:

You should be able to run 4-4-4 on the timing at that speed even on fb ram I would think

Thanks, I have adjusted the timing now. 4-4-4 seems stable at with a ~2% uplift in Cb, so it should be helping a little. I'll report back when I've done further tweaking. I'm pretty sure I can get it above 850 Cb.

20 hours ago, Dabombinable said:

1. That voltage makes my Xeon X5450 look like the poorest binning ever
2. God my P5Q Deluxe is shit when it comes to DDR2 clock speeds (it barely tolerates 2x1GB DDR2 1066 5-6-6-18 @ 2.2V, my P5K VM handled the sticks at 4-5-5-14 2.1V)
3. The performance in games that use 4 threads should be similar to an i5 4440 or Ryzen 3 1200.

I think +1.4 Vcore on these chips is a quite a bit though  

 

[Dabombinable]

1 hour ago, Overl0rd said:

Thanks, I have adjusted the timing now. 4-4-4 seems stable at with a ~2% uplift in Cb, so it should be helping a little. I'll report back when I've done further tweaking. I'm pretty sure I can get it above 850 Cb.

I think +1.4 Vcore on these chips is a quite a bit though  

 

I ran my Xeon at 1.45V to get 4.4GHz. Still don't know how a CM Eclipse and Siedon 120V could dissipate the sheer amount of heat. And if I remember correctly, 1.45V is the safe limit according to Intel.

[danakahawkeye]

2 hours ago, Tech Wizard said:

Man, you're losing to a stock 3930K... Overclock that chip, and close all background applications

Ive closed down the other apps now and my score went up abit for multi threaded, single threaded stayed about the same, I ain't confident enough to overclock this chip yet.

[O9B0666]

i ran this again

i dont understand this benchmark, whats good marks to be at?

[Tech Wizard]

4 minutes ago, O9B0666 said:

i ran this again

i dont understand this benchmark, whats good marks to be at?

You need that voltage to push 4,6?

[JDR]

Hey guys not sure if my score is mid range or ok for the setup im running...

[Belezeebub]

Not my best score or even the highest Overclock on this chip but its a good baseline

Max temp was 59c

 

[DildorTheDecent]

6 hours ago, Belezeebub said:

Not my best score or even the highest Overclock on this chip but its a good baseline

Max temp was 59c

That already looks pretty good

 

@done12many2 get a load of this guy

[Overl0rd]

Gonna leave it at this score for now. Still 4.05 GHz, but with improved timings. Going to need a better Northbridge cooling solution and active RAM cooling before pushing it further as it's getting awfully toasty. Still not too shabby for a 10 year old platform.

[Jumper118]

13 hours ago, Belezeebub said:

Not my best score or even the highest Overclock on this chip but its a good baseline

Max temp was 59c

 

 

Did you steal my cpu? 

[Jumper118]

16 hours ago, JDR said:

Hey guys not sure if my score is mid range or ok for the setup im running...

 

Would have thought you could get much closer to 800cb on that setup tbh. 

[Jumper118]

2 hours ago, Overl0rd said:

Gonna leave it at this score for now. Still 4.05 GHz, but with improved timings. Going to need a better Northbridge cooling solution and active RAM cooling before pushing it further as it's getting awfully toasty. Still not too shabby for a 10 year old platform.

Fans cable ties. Nb water block and cables ties.

 

 

@agent_x007 you are 1st in your league on hwbot. Good effort. You should join Team MLG

[agent_x007]

Nah, I'm good right now ;)

[Tech Wizard]

Maybe I can reach top 3 in Novice if this 1650 v2 is decent

[Jumper118]

55 minutes ago, Tech Wizard said:

Maybe I can reach top 3 in Novice if this 1650 v2 is decent

Yeah go for it!!! 

[Belezeebub]

6 hours ago, Jumper118 said:

Did you steal my cpu? 

Yes... Of course

 

[Clyne]

Got myself a X48 board, G3 750W, Cryorig H5 Ultimate for all of this

E8500s are like 6 bucks so perhaps 4GHZ run on that

[JDR]

13 hours ago, Jumper118 said:

Would have thought you could get much closer to 800cb on that setup tbh. 

Yeah i did feel my score was a little low too... any idea on what i can do to improve my score? (i know its just a number but still....)

[Overl0rd]

17 hours ago, Jumper118 said:

Fans cable ties. Nb water block and cables ties.

 

 

Yeah, I'm ordering some 40mm fans as it appears I don't have any anymore. Water blocks would be neat as well, but that's not going to happen unfortunately.

[Jumper118]

10 hours ago, JDR said:

Yeah i did feel my score was a little low too... any idea on what i can do to improve my score? (i know its just a number but still....)

Did you use the tips in the op? Try those if you didn't already 

[Tech Wizard]

Ok bois, last attempt on X79 with these two. 

 

[Tech Wizard]

Yeah, this was the 4th 4930K failing to beat my OG 4930K. Needed 0.4V more @ 4,5GHz, and 0.5V more @ 4,6 than OG chip required...

5 different chips tried in total, and none can do higher than 4,6GHz I'm done binning 4930Ks.

Trying out the 1650 v2 tomorrow. Let's hope it beats OG, so I can free myself from ever hearing 4930K again! 

[Jumper118]

12 hours ago, Tech Wizard said:

Yeah, this was the 4th 4930K failing to beat my OG 4930K. Needed 0.4V more @ 4,5GHz, and 0.5V more @ 4,6 than OG chip required...

5 different chips tried in total, and none can do higher than 4,6GHz I'm done binning 4930Ks.

Trying out the 1650 v2 tomorrow. Let's hope it beats OG, so I can free myself from ever hearing 4930K again! 

That's disappointing. You must have got all the super average ones