Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[agent_x007]

1 hour ago, Jumper118 said:

O yeah the rex is nice. whats the max fsb?

 

Using this old CPU, 425MHz (1700MHz effective) : http://valid.x86.fr/chgnjh 
Keep in mind that min. multi on this is x12, so 425MHz is hard enough (without melting my Air cooling at the base :D).

[Mutoh]

4 hours ago, Jumper118 said:

yes, if you ran the command rate at 1T that would make a huge difference. 

 

Thanks for the tip! Got a bit of a boost from doing that. Multicore result went up to 1077.  

 

 

 

 

[rfjunkie]

Figured I'd give it a try with this PC. I've never ran Cinebench on anything of mine before. 

[Jumper118]

8 hours ago, LSky said:

Once again, the CPU vcore isn't reading correctly. It should be around 1.30v.

 

memory command rate to 1t

7 hours ago, Mutoh said:

 

Thanks for the tip! Got a bit of a boost from doing that. Multicore result went up to 1077.  

 

 

 

 

 

try increasing the cache frequency next. ideally you want it 1:1 with the core frequency, so in your case 4.8ghz, but you need to take it up in small steps.  

[Jumper118]

5 hours ago, rfjunkie said:

Figured I'd give it a try with this PC. I've never ran Cinebench on anything of mine before. 

 

welcome to the forum. 

[Mutoh]

12 hours ago, Jumper118 said:

memory command rate to 1t

try increasing the cache frequency next. ideally you want it 1:1 with the core frequency, so in your case 4.8ghz, but you need to take it up in small steps.  

 

Should I start at stock clocks or at the 4.8? Im relatively new to all of this so any info would help.

[done12many2]

1 minute ago, Mutoh said:

 

Should I start at stock clocks or at the 4.8? Im relatively new to all of this so any info would help.

 

As you increase cache, you'll reach a point where you'll need to dial in more Vcore. Raise cache as close to 4.8 as you can while maintaining a Vcore that you are comfortable with.  Cache will increase your memory performance as well particularly with writes and copy.

[Mutoh]

13 minutes ago, done12many2 said:

 

As you increase cache, you'll reach a point where you'll need to dial in more Vcore. Raise cache as close to 4.8 as you can while maintaining a Vcore that you are comfortable with.  Cache will increase your memory performance as well particularly with writes and copy.

Thanks for the tip! Ill mess with it after I am done work tonight

[Jumper118]

31 minutes ago, Mutoh said:

 

Should I start at stock clocks or at the 4.8? Im relatively new to all of this so any info would help.

yes, the cache and cpu voltage are linked on skylake chips i think, so you can normally get it pretty close while maintaining the speed speed and voltage. 

[MoraisGT]

On 25/02/2017 at 2:04 AM, dexT said:

I'd buy that chip.

Dang it...

 

If I was working right now I'd sell it to you and buy myself an AM4 plataform

 

But since you mentioned it, I did do a marginally better score (and with lower Vcore), I just forgot to post it

 

@5155MHz with 1.44v (bios)

[purple_rider]

Another, but really new laptop from school. It is a HP Probook 440 G3.

[Lays]

On 2/26/2017 at 10:46 AM, done12many2 said:

 

No love, huh?  You suck.   

 

This

 

 

beats this

 

 

 

I'm pretty sure it would have been higher with Windows 7, but in the end...

 

 

 

 

 

happy birthday man

 

[arnavvr]

3 hours ago, Lays said:

 

happy birthday man

 

 

Watch him come back on Windows 7 and get 249  

[Jumper118]

7 hours ago, MoraisGT said:

Dang it...

 

If I was working right now I'd sell it to you and buy myself an AM4 plataform

 

But since you mentioned it, I did do a marginally better score (and with lower Vcore), I just forgot to post it

 

@5155MHz with 1.44v (bios)

 

that is a pretty good 3930K  

[Lays]

4 hours ago, arnavvr said:

Watch him come back on Windows 7 and get 249  

his chip is a lot better than mine, I'm only winning because I know how to OC RAM and use a proper OS

[MageTank]

1 hour ago, Lays said:

his chip is a lot better than mine, I'm only winning because I know how to OC RAM and use a proper OS

Ha... good one  

[Lays]

2 minutes ago, MageTank said:

Ha... good one  

for benching I do, and considering benching is what this thread is about, then ya dood.

[purple_rider]

11 hours ago, Lays said:

 

happy birthday man

-snip-

Watching you two go back and forth has been quite entertaining. 

[done12many2]

3 hours ago, Lays said:

his chip is a lot better than mine, I'm only winning because I know how to OC RAM and use a proper OS

1 hour ago, Lays said:

for benching I do, and considering benching is what this thread is about, then ya dood.

 

Slow your roll little fella.

 

For clarification, I can't use Windows 7 and you have a higher binned B-Die. It's really not a matter of talent.    As far as Windows 7, it'll work with my board, but only with 6th gen chips.  

 

On 2/25/2017 at 11:19 PM, Lays said:

@done12many2 u tryna race single thread right now bud

 

I thought we were doing this the other night per your challenge.  In street racing they'd have called your submission yesterday nothing, but a ricer fly by.   

 

Oh well, I'll do round two as well.  That is, as soon as my order shows up.  I guess we'll see if it's a matter of talent or binning then.  

 

 

[Jumper118]

37 minutes ago, done12many2 said:

 

Slow your roll little fella.

 

For clarification, I can't use Windows 7 and you have a higher binned B-Die. It's really not a matter of talent.    As far as Windows 7, it'll work with my board, but only with 6th gen chips.  

 

 

I thought we were doing this the other night per your challenge.  In street racing they'd have called your submission yesterday nothing, but a ricer fly by.   

 

Oh well, I'll do round two as well.  That is, as soon as my order shows up.  I guess we'll see if it's a matter of talent or binning then.  

 

 

You still can't win with ram speed because you have 4 dimmer slots you would be better off ordering an apex and some galaxy hof memory

[done12many2]

3 minutes ago, Jumper118 said:

You still can't win with ram speed because you have 4 dimmer slots you would be better off ordering an apex and some galaxy hof memory

 

I know, but the stuff I have now is too slow.  The new sticks will only be for benchmarking.

 

Remember, we're running about the same results while I'm using the lower binned stuff.  End the end, my memory doesn't have to be as fast as his is on his 2-dimm board.  It just has to be faster than what it currently is.  

[Jumper118]

7 minutes ago, done12many2 said:

 

I know, but the stuff I have now is too slow.  The new sticks will only be for benchmarking.

 

Remember, we're running about the same results while I'm using the lower binned stuff.  End the end, my memory doesn't have to be as fast as his is on his 2-dimm board.  It just has to be faster than what it currently is.  

True. 

[iHardware Shelden]

@Jumper118 I hope this R19 is going to be a thing  

[Jumper118]

1 minute ago, iHardware Shelden said:

@Jumper118 I hope this R19 is going to be a thing  

Idk it's look like they are just having a new version of r15 which is annoying because idk how to tell the difference yet. It supports ryzen as well as supporting Intels hyper threading better too. Even i7 and i3 should get higher scores on this new version. 

[iHardware Shelden]

On 2/28/2017 at 8:25 AM, Jumper118 said:

Idk it's look like they are just having a new version of r15 which is annoying because idk how to tell the difference yet. It supports ryzen as well as supporting Intels hyper threading better too. Even i7 and i3 should get higher scores on this new version. 

Weird, I wish they would just make a new version so that older scores and newer scores arnt all over the charts