Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[Jumper118]

8 minutes ago, nick name said:

I have contemplated this. 

 

Separately, are those just the regular Corsair SP120 fans or are they the better SP120L 2700 RPM fans?  

idk, i got them off ebay as a job lot for £2 each all brand new taken off aio  

[Tobleh]

On 10/31/2019 at 8:34 PM, Tristerin said:

Hit my goal of 4000+ point pass on my R7 1700 finally!

That's awesome to see, I've been trying to hit 4k on my 1700 since r20 came out haha, best I've gotten is 3975. Sadly I cap out at 3.93ghz in bios before failed boots, and cinebench crashes with ryzen master over 4ghz. Tweaking memory pushed me past my initial 3935 barrier, but 14,16,16,32 at 3200mhz is as much as it can handle. I'm sure if I invest in a bit better memory I could get there.

[Tristerin]

11 minutes ago, Tobleh said:

That's awesome to see, I've been trying to hit 4k on my 1700 since r20 came out haha, best I've gotten is 3975. Sadly I cap out at 3.93ghz in bios before failed boots, and cinebench crashes with ryzen master over 4ghz. Tweaking memory pushed me past my initial 3935 barrier, but 14,16,16,32 at 3200mhz is as much as it can handle. I'm sure if I invest in a bit better memory I could get there.

I did this on 2666mhz CL18 and didn't even know it (got a failed boot at some point during testing, I repeated the 2666mhz CL18 runs and got between 4011 and 4026.  So was not the 3600mhz CL18 kit I have that helped this.  To test this I swapped in a CL14 2133mhz 16gb kit I have - scored 4011 lowest.  Just sharing my findings over the last 24 hours.

 

Want to know the final secret?

 

Set Task Manager priority to CineR20 to Realtime (will lock up PC actually during stress test and then will unfreeze at end of Cine run) and then drag CineR20 to be completely off screen until only the run button is showing basically.  Now hit "run" - Voila free 70 or so points.  I just couldn't crest 4k without this tip (thanks @OlympicAssEater) - now get those points!

 

 

[nick name]

15 hours ago, Jumper118 said:

idk, i got them off ebay as a job lot for £2 each all brand new taken off aio  

Then if it was like the seller (exact same eBay situation) I got em from then they were pulled off the H80i which had the SP120L on them.  Though I wanna say I may have paid just a hair more than you did.  However, I only got six of em.  

[GoogleGonnaSaveUs]

Intel T7200
R15 and R20scores just installed windows

[Mark Kaine]

So why is it my 3600 only clocks at ~3.9GHz in this? 

 

 

 

And is this a good score?  I definitely beat the Intels!  Lol 

 

Well actually I wanted a test that maxes out my cpu - it pretty much reaches 4.2GHz while gaming but when I do tests it's like ~3.8-4.0 only.  Odd? 

[glenalz81]

30 minutes ago, Mark Kaine said:

Odd? 

Max boost refers to single core 4.2ghz.

All core boost should be 3.9-4.0ghz.

 

Normal.

[Mark Kaine]

23 minutes ago, glenalz81 said:

Max boost refers to single core 4.2ghz.

All core boost should be 3.9-4.0ghz.

 

Normal.

So that just means games make more use of single core performance generally because I see that being hit  quite a lot?  But then I also wonder why it sometimes just stays at ~4.0 on all cores for example. 

 

Edit: ah I see,  doing that single core test it goes to ~ 4.15 occasionally... thanks. 

 

I'm really tempted to use the boost button in MSI command center,  that did wonders with my old Ryzen 2200G.

[1van]

i7-8700K ES QN8G (5GHz, -2 AVX offset) + Asus Maximus 8 Hero:

Cinebench R15:

Spoiler

Cinebench R20:

Spoiler

 

[Tobleh]

I'm even more tantalizingly close to 4000. 4.02ghz is the furthest I've been able to get this thing, and adding @Tristerin's realtime trick gave me that little extra boost. I think I can get there if I can work out another 10 or 20mhz. My system is just so sensitive past 4ghz haha, it's such a gamble whether it'll crash or not.

[Tristerin]

21 minutes ago, Tobleh said:

I'm even more tantalizingly close to 4000. 4.02ghz is the furthest I've been able to get this thing, and adding @Tristerin's realtime trick gave me that little extra boost. I think I can get there if I can work out another 10 or 20mhz. My system is just so sensitive past 4ghz haha, it's such a gamble whether it'll crash or not.

I implore you to try this at 2666mhz on your ram, timings be damned, and let me know your results.

 

I think you will be more stable and able to push that little extra out, and from my research its the MHZ of the CPU not the RAM that gives you great results incrementally

[Tobleh]

3 hours ago, Tristerin said:

I implore you to try this at 2666mhz on your ram, timings be damned, and let me know your results.

 

I think you will be more stable and able to push that little extra out, and from my research its the MHZ of the CPU not the RAM that gives you great results incrementally

Sadly while I was able to push my cpu to 4.03ghz after dropping my ram to 2666, I still got between 3980 and 3990. I'll try and work on it more next weekend because I'm obviously missing something important. I'm thinking it might be a thermal limit since I'm still only air cooled, I'm definitely pushing over 80c under load with these ocs.

[Tristerin]

Just now, Tobleh said:

Sadly while I was able to push my cpu to 4.03ghz after dropping my ram to 2666, I still got between 3980 and 3990. I'll try and work on it more next weekend because I'm obviously missing something important. I'm thinking it might be a thermal limit since I'm still only air cooled, I'm definitely pushing over 80c under load with these ocs.

I couldn't push this OC on a 240mm AIO which is similar to performance to most high end air cooling, had to build a 600mm worth of radiator space loop lol - cause Cine would spike it to shut down - Good luck!

[Tobleh]

7 minutes ago, Tristerin said:

I couldn't push this OC on a 240mm AIO which is similar to performance to most high end air cooling, had to build a 600mm worth of radiator space loop lol - cause Cine would spike it to shut down - Good luck!

I think that definitely explains my troubles lol. Maybe I'll borrow an A/C unit and jayz2cents my way past 4k. Appreciate the help 

[ManyCoresGuy]

I wonder what my scores would be if I had windows installed .

[FROSTYBE3R]

Non delidded 7980xe.

[Jumper118]

21 hours ago, FROSTYBE3R said:

Non delidded 7980xe.

 

no cpuz in screenshot

[K0NG]

Terrible fresh delivered 9900k.. 1.41v and still unstable at 5 GHz but fully stable at 4.9 at 1.264v (maybe because of the 9900 KS?)

 

[Jumper118]

On 11/6/2019 at 11:16 PM, K0NG said:

Terrible fresh delivered 9900k.. 1.41v and still unstable at 5 GHz but fully stable at 4.9 at 1.264v (maybe because of the 9900 KS?)

 

 

yes all the good ones have been taken for ks, same thing happened to the 8700k when the 8086k came out

[nick name]

I just scored a 2080 and 2090 in Cinebench R15.  Now put me on the list.  

 

Edit:

 

@Jumper118  I SAID PUT ME ON THE LIST!

[TrainFan475]

My ryzen 5 2600x with slow ram:

[glenalz81]

This'll do for now until i get some better memory. 4.4GHz all core 1.38v

[Tech Wizard]

2 hours ago, glenalz81 said:

This'll do for now until i get some better memory. 4.4GHz all core 1.38v

Is it stable at 4,4GHz with that low static voltage? Almost tempted to grab a 3600X over a 3600

EDIT: Didn't see u said 1.38V. Did u change LLC to give extra voltage under load?

[glenalz81]

2 hours ago, Tech Wizard said:

Did u change LLC to give extra voltage under load?

Haven't had to, stable yeah and voltage is dropping at idle same as before only difference is the max voltage i see now is 1.38 instead of 1.48.

[Jumper118]

On 11/13/2019 at 8:06 AM, nick name said:

I just scored a 2080 and 2090 in Cinebench R15.  Now put me on the list.  

 

Edit:

 

@Jumper118  I SAID PUT ME ON THE LIST!

 

i will once intel and the Illuminati have stopped chasing me cos i have this.