The Water Cooling Gallery

[farhanorakzai]

Here's mine before the leak and replacement with an h100i

[Spev]

Here's mine before the leak and replacement with an h100i

Damn, you had a leak? Lol what happened?

[Fragsa1]

Imgur Album: http://imgur.com/a/Huin5

 

Build Log: http://linustechtips.com/main/topic/255872-project-whiteout-v20-h440-watercooled-3xradiators-10-fans

 

 

 

[farhanorakzai]

Damn, you had a leak? Lol what happened?

I was too cheap to buy compression fittings, and the tube going from my cpu block to the reservoir came out drenching my gpu's and case. Luckily I used non conductive liquid and the system was not actually on

[Bosco]

Here's my setup it's my first build and I think it went pretty well.

 

i7 5820k and dual 980s

 

 

I just built it last night so its about 17 hours into the leak test atm but so far so good. I gotta say though that the acrylic tubing was a super fun challenge and I think it looks way better then saggy flex tubing. Now I only need some LEDs to make it really pop.

 

[Spev]

Here's my setup it's my first build and I think it went pretty well.

 

i7 5820k and dual 980s

 

2014-11-24 20.03.48.jpg

 

I just built it last night so its about 17 hours into the leak test atm but so far so good. I gotta say though that the acrylic tubing was a super fun challenge and I think it looks way better then saggy flex tubing. Now I only need some LEDs to make it really pop.

Ahh that's the Primo? It's very nice, I slightly regret not getting it, but I wanted something not quite like a 900d lol. I have the Luxe coming in the mail today which I think we be just fine just the available PSU room on the floor is so nice in your case!

 

I have to ask you how you are doing your leak test. I know it's at least 6 hours but even up to 24, how do you do this? Like do you just find a day where your not doing jack shit and be by it all day? Lol cause I think I'm gonna have a hard time doing that. Is it ok to do it in chunks?

 

Also I have to ask how you like that EK res? I'm looking for one atm

[Bosco]

Ahh that's the Primo? It's very nice, I slightly regret not getting it, but I wanted something not quite like a 900d lol. I have the Luxe coming in the mail today which I think we be just fine just the available PSU room on the floor is so nice in your case!

 

I have to ask you how you are doing your leak test. I know it's at least 6 hours but even up to 24, how do you do this? Like do you just find a day where your not doing jack shit and be by it all day? Lol cause I think I'm gonna have a hard time doing that. Is it ok to do it in chunks?

 

Also I have to ask how you like that EK res? I'm looking for one atm

I almost went with the 900d at one point but I really like the accent on the right of the case it makes it a little less boxy without looking like a spaceship like so many cases do.

 

My leak test is pretty straight forward I unplugged everything but the pump and put paper towel in everywhere I could near the fittings and just let it run (the paper towel should catch any drips and be easier to see). I watched it for the first few hours then checked again before bed and now I'm just checking every hour or two for a full 24 hours. 

 

The res is nice I took the top right off for filling because my funnel wouldn't fit in the threaded holes and i couldn't tighten the mounts to the res itself because of the way it mounts in the case I can't get to the screws but it's tight enough and has rigid tubing holding it in so I'm not worried.

 

Also I'm running white tubing with distilled water and a kill coil so even if it leaks I should be ok.

[raptorjesusthemessiah]

This is what my pc currently looks like (gonna add a gpu waterblock as soon as EK releases their gigabyte 970 ones)

[Nomy]

Imgur Album: http://imgur.com/a/Huin5

 

Build Log: http://linustechtips.com/main/topic/255872-project-whiteout-v20-h440-watercooled-3xradiators-10-fans

 

snip

 

Yours looks absolutely stunning! I keep going over the album and try imagining it on my own desk

[Spev]

This is what my pc currently looks like (gonna add a gpu waterblock as soon as EK releases their gigabyte 970 ones)

 

AHH! I'm waiting for them to release the ones for my EVGA 970 Can they hurry up??

[raptorjesusthemessiah]

AHH! I'm waiting for them to release the ones for my EVGA 970 Can they hurry up??

Sucks to wait Atleast the Gigabyte 970 waterblock was released today, gonna have to wait for it to be in stock though.. 

[godsarmy]

 

 

 

[Tetters]

here is the backplate I am awaiting.

 

 

Who made the back-plate for you? (beautiful rig BTW)

[viakruzis]

Here is mine,

 

 

AMD FX9590 @ 4,7 Ghz

Asus Crosshair V Formula Z

Gigabyte 780Ti Windforce X3 w/ EK WB waterblock and backplate

16Gb Ram Kingston HyperX Beast

EK 240 Radiator + Thermaltake 120

EK Multi option reservoir

EK DCP Pump.

CPU EK waterblock.

Aerocool Predator X1 Case.

[Mindtrick]

Asus Rampage V Extreme

I7 5960X

32GB Dominator Platinum DDR4

(X2) GTX Titan X

(X2) Alphacool UT60 480 Rads

(X10) Noctua NF-F12

(X2) Noctua NF-A14

Bitspower fittings

EK water blocks & pump top.

Lian li D5 pump

Corsair AX1200i

[Devildog83]

Juat a simple CPU loop.

 

[toxicsuppression]

my old build 

 

Rebuilt my system recently. now it looks like this

 

[Raider]

 

Just need some white paint for jazzing it up.

[godsarmy]

 

my watercooled setup!

[KoNLaR]

What do you guys think? My first time building a custom loop.

 

Full album including setup & some more information about the build here: http://imgur.com/a/DvPFs

PCPartPicker: https://pcpartpicker.com/b/wsZ8TW

 

 

[X_Rated_Box]

What do you guys think? My first time building a custom loop.

 

Full album including setup & some more information about the build here: http://imgur.com/a/DvPFs

PCPartPicker: https://pcpartpicker.com/b/wsZ8TW

 

 

 

 

FIX DAT CARDSAG nooow ! nevermind a verynice build

[Vaporr]

Hey guys just wanted to share my PC. I put a lot of time and work and planning into this. It's almost done just awaiting a PSU cover and a custom GPU backplate. Also have a few more cables to sleeve.

here is the backplate I am awaiting.

 

looks like skunkworks aha 

 

 

this is skunkworks (not mine of corse aha) https://uk.images.search.yahoo.com/images/view;_ylt=A2KLj9IP5y9VeQEAWUNNBQx.;_ylu=X3oDMTIyOWg0Nm0zBHNlYwNzcgRzbGsDaW1nBG9pZAM2NTQxZWExYTFjNDE3YWY0ZTQyMzFhMGE1ZDA2MTY3NgRncG9zAzEEaXQDYmluZw--?.origin=&back=https%3A%2F%2Fuk.images.search.yahoo.com%2Fsearch%2Fimages%3Fp%3Dskunkworks%2Bpc%26n%3D60%26ei%3DUTF-8%26fr%3Dmcafee%26fr2%3Dsa-gp-uk.images.search.yahoo.com%26tab%3Dorganic%26ri%3D1&w=1920&h=1080&imgurl=i.ytimg.com%2Fvi%2FwhKB8YvB14w%2Fmaxresdefault.jpg&rurl=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DwhKB8YvB14w&size=156.0KB&name=maxresdefault.jpg&p=skunkworks+pc&oid=6541ea1a1c417af4e4231a0a5d061676&fr2=sa-gp-uk.images.search.yahoo.com&fr=mcafee&tt=maxresdefault.jpg&b=0∋=200&no=1&ts=&tab=organic&sigr=11a56vlu9&sigb=14evpgkq3&sigi=11cou7i7k&sigt=10hamf174&sign=10hamf174&.crumb=mxbvUNc9Sw9&fr=mcafee&fr2=sa-gp-uk.images.search.yahoo.com

[uofaboy]

Here is mine:

 

Watercooling components:

XSPC Raystorm Copper CPU Block

Primochill LRT Advanced UV Yellow Soft Tubing

Bitspower, Monsoon Compression Fittings

XSPC RX360 D5 Bay Res/Pump Combo

XSPC RX360 + XSPC AX360 Radiators

2x EKWB GTX980 Strix + Backplates GPU Blocks

 

[grimmm88]

Here is mine but still ongoing

 

last build a month ago

 

 

Changing new GPU and Radiator

 

 

changing something else. haven't complete

[KoNLaR]

FIX DAT CARDSAG nooow ! nevermind a verynice build

 

Hopefully this is better