Build Log Submission Thread! May 2014

[Jumper118]

I didn't really have a choice as the giant one that EVGA sells only works for 2 way SLI if there is a dual slot gap between the two cards and on my mobo there is only a single slot gap between the GPUs so I had to use 2 of the 2 way SLI bridges....it actually looks a lot more finished with both on than with one on there and a gap where another could/should go

i think it makes it look like you have know idea what you are doing 

[ericlee30]

 

 

 

Thread URL - http://linustechtips.com/main/topic/158551-octane-boxx-4-radiators-in-a-corsair-air-540/

 

Description - This build came into fruition after I realized that running 4 GPUs on air, in a rendering machine that is meant to run constantly for 24 hours at 80C was not a good idea! Being that this is my first water cooling build there were a lot of challenges, the biggest one was, getting 4 radiators (3 x 240mm & 1 x 120mm) to fit inside my Corsair Air 540. I ended cutting out the drive trays at the bottom on the case with a dremel. Fortunately for me that was the most difficult part of this rig--everything else required just a bit of planning before executing, but it was intimidating.

 

Picture URL - http://imgur.com/a/qE5VG

 

Yeah, this one looks really sexy, it has got my vote There are some really good builds this month.

[btg0002]

i think it makes it look like you have know idea what you are doing 

No one likes a troll sir, but you are entitled to your opinion

[purplepenguin202]

I vote for snef.  Or that N64 build that came up recently...

[pieterfun]

Thread URL : http://linustechtips.com/main/topic/88498-build-logs-mrtuf-20-another-corsair-air-540/

 

Description : This was the first PC that struck me deeply on ideas and way to evolve for watercooling. There are a lot of acrylic tubing rig out there, but there are only few in my country, Malaysia. So I decided to build this rig to achieve a word that cannot be describe system, then the Mr.TuF 2.0 is born. I used less than 24 hours to build this rig because rushing for the same week LAN party that was going on.

 

Picture URL : https://flic.kr/s/aHsjQ1yaWD

 

Cool grafics card backplate dude !

[Puma911]

No one likes a troll sir, but you are entitled to your opinion

Pretty sure he means you only need one of them. The second sli bridge slot is for connecting card two to card 3 and then card 3 to card 4 if you have a 4th. Try running it with just the one bridge. From what I understand that is how it works.

[btg0002]

Pretty sure he means you only need one of them. The second sli bridge slot is for connecting card two to card 3 and then card 3 to card 4 if you have a 4th. Try running it with just the one bridge. From what I understand that is how it works.

You can have both connected and it doesn't negatively affect performance. IMO it looked odd having the extra connectors not covered, but you are correct there are 2 connectors so that you can run 3 or 4 way SLI

[B NEGATIVE]

Thread URL : http://linustechtips.com/main/topic/60704-clos3-impact-finishedfinal-pics/

 

Description: A LAN box to get gurls with....Watch their amazement when you turn it on by remote control......Watch their eyes glaze over with lust when you go thru the cooling system mods........Stand there sure in the knowledge that they will be back quickly from undislosed location that they suddenly had to dash off too when you show the paint effects off........Describe the touchscreen monitor in the pedestal to her thru what sounds like her heavy breathing of desire or an airplane phone.

 

Pics:

 

 

 

 

[LiquidBatman]

Thread URL : http://linustechtips.com/main/topic/88498-build-logs-mrtuf-20-another-corsair-air-540/

 

Description : This was the first PC that struck me deeply on ideas and way to evolve for watercooling. There are a lot of acrylic tubing rig out there, but there are only few in my country, Malaysia. So I decided to build this rig to achieve a word that cannot be describe system, then the Mr.TuF 2.0 is born. I used less than 24 hours to build this rig because rushing for the same week LAN party that was going on.

 

Picture URL : https://flic.kr/s/aHsjQ1yaWD

 

Which Ram and coolant is that may i ask?

[dfox mxyzptlk]

@LiquidBatman, It is a "Kingston Beast - 8GB Kit (2x4GB) - DDR3 2400MHz CL11" and coolant is UV Green I think.

[Dickens'Mc'Jickens]

How did you get that motherboard?

[enthalpy]

It seams as if the builogs in the WANshow are dead. Nice...

[Grrizz]

MEDIC!!!

[Sharif]

ALl these are so awesome!!!!!!!!!!

when i grow up and start working,i gotta do stuff like this