Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Enderman

Do YOU have H100i / H80i problems? LOOK HERE before posting

Recommended Posts

OP isn't 100% correct. Corsair Link not seeing fans on Windows 8.1 is caused by a USB-setting in the registry:

 

Go into the registry and look for HKLM\SYSTEM\CurrentControlSet\Enum\USB\VID_1B1C&PID_0C04. For each port/path string you see under this (numbers and ampersands smushed together), open the "Device Parameters" and change the FOUR DWORD settings to 0 (AllowIdleIrpInD3, DeviceSelectiveSuspended, EnhancedPowerManagementEnabled, SelectiveSuspendEnabled). Reboot.


Currently working on a Watercooled Corsair Obsidian 350D (clicky)


Intel i5 4670k, ASUS GTX 780, Samsung 840 Evo, 16GB RAM, 3 TB Seagate HDD

Link to post
Share on other sites
Posted · Original PosterOP

OP isn't 100% correct. Corsair Link not seeing fans on Windows 8.1 is caused by a USB-setting in the registry:

 

Go into the registry and look for HKLM\SYSTEM\CurrentControlSet\Enum\USB\VID_1B1C&PID_0C04. For each port/path string you see under this (numbers and ampersands smushed together), open the "Device Parameters" and change the FOUR DWORD settings to 0 (AllowIdleIrpInD3, DeviceSelectiveSuspended, EnhancedPowerManagementEnabled, SelectiveSuspendEnabled). Reboot.

I never considered windows 8 since I'm not using it.

But thanks for adding to our information pool of solutions :D

Some people will be saved by your help.


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites

Yup just set it yo blue in corsair link and then save, close, and uninstall. You can also remove the internal USB cable at that point.

Settings will be saved to your H100i.

Ok will do, thanx! for the quick response and info.

Link to post
Share on other sites
Posted · Original PosterOP

Ok will do, thanx! for the quick response and info.

Yup np :)


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites
Posted · Original PosterOP

I did it, Thanx Again! it's working without the Corsair Link. B)

Yay :D congrats


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites

Installed the H80i. 

I keep getting the error - "CPU Fan Error". 

 

1. The fans are working - sounds like a jet engine though :-D

2. Pressed F1 and went to setup and saw that the CPU temp was increasing rapidly..

 

I followed the instructions on the H80i Manual.

 

Suggestions? What could be wrong? 

Link to post
Share on other sites
Posted · Original PosterOP

Installed the H80i. 

I keep getting the error - "CPU Fan Error". 

 

1. The fans are working - sounds like a jet engine though :-D

2. Pressed F1 and went to setup and saw that the CPU temp was increasing rapidly..

 

I followed the instructions on the H80i Manual.

 

Suggestions? What could be wrong? 

Did you plug the sata connector from the H80i to the sata power of your PSU?


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites

Did you plug the sata connector from the H80i to the sata power of your PSU?

 

Yes I did. I will check the cable connections once more.

Link to post
Share on other sites
Posted · Original PosterOP

Yes I did. I will check the cable connections once more.

Ok doublecheck

also did you plug in the thin single cable into the CPU fan header? The one that looks like a fan plug but with only 1 cable.


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites

Installed the H80i. 

I keep getting the error - "CPU Fan Error". 

 

1. The fans are working - sounds like a jet engine though :-D

2. Pressed F1 and went to setup and saw that the CPU temp was increasing rapidly..

 

I followed the instructions on the H80i Manual.

 

Suggestions? What could be wrong?

 

1. Can you control you fans with the Corsair Link software?

2. Did you put thermalpaste on the CPU./cooler?


Currently working on a Watercooled Corsair Obsidian 350D (clicky)


Intel i5 4670k, ASUS GTX 780, Samsung 840 Evo, 16GB RAM, 3 TB Seagate HDD

Link to post
Share on other sites

1. Can you control you fans with the Corsair Link software?

2. Did you put thermalpaste on the CPU./cooler?

I am getting the error at the start up itself. Do i have to make any changes in the BIOS? I have seen in some forums that you can ask the BIOS to ignore the CPU fans.

Thermal Paste has been applied..

Link to post
Share on other sites

Ok doublecheck

also did you plug in the thin single cable into the CPU fan header? The one that looks like a fan plug but with only 1 cable.

The 3 pin cable is plugged into the CPU Fan Header. 

 

I checked again today morning and it is giving me the same error. I am assuming the SATA power is working fine since the fans are working.

The pump itself is blinking in RED. The alarming thing is that the CPU temp seems to be increasing. So I am going to try and re-install this once more.

 

Any other suggestions? Thanks for helping

Link to post
Share on other sites

This has been bugging me since  i first got the H100i, but other PC problems kept me from looking into it, hopefully your solution works :D.


System Specs:

CPU:Intel Core i5 4670k @ 4.4Ghz ☼ GPU: R9 280x (and 750ti sometimes) ☼ RAM: 16gb Corsair Vengeance @ 1866Mhz ☼ Motherboard: ASUS Maximus VI HERO

blah...

Link to post
Share on other sites
Posted · Original PosterOP

The 3 pin cable is plugged into the CPU Fan Header. 

 

I checked again today morning and it is giving me the same error. I am assuming the SATA power is working fine since the fans are working.

The pump itself is blinking in RED. The alarming thing is that the CPU temp seems to be increasing. So I am going to try and re-install this once more.

 

Any other suggestions? Thanks for helping

The last resort is to update the firmware on the H100i as described in the first post. If that fails you will need to RMA. :(


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites

The 3 pin cable is plugged into the CPU Fan Header. 

 

I checked again today morning and it is giving me the same error. I am assuming the SATA power is working fine since the fans are working.

The pump itself is blinking in RED. The alarming thing is that the CPU temp seems to be increasing. So I am going to try and re-install this once more.

 

Any other suggestions? Thanks for helping

log in to windows and see if corsair link has any control over the fans


Main Rig:

Spoiler

 

AMD FX 8320 @4.5Ghz  8GB Corsair Vengeance LP Blu 1600Mhz Sapphire Vapor X HD 7950 3GB 120GB Samsung 840 Evo  Asus M5A99FX PRO R2.0 

Corsair 600T Graphite Corsair H80i Corsair CX600 2x LG 24 inch LED @1080p Logitech G700s CM Quickfire TK (Brown)

 

Home Server:

Spoiler

A4 6300 @3.7Ghz 5GB Kingston/Crucial DDR3 1600Mhz 1TB WD Green 2TB Seagate Barracuda

500GB WD Blue 2x Gigabit NIC Antec 300 OCZ 500w PSU Gigabyte F2A68HM-HD2 R1.1

 

 

 

 

Link to post
Share on other sites

log in to windows and see if corsair link has any control over the fans

 

 

The last resort is to update the firmware on the H100i as described in the first post. If that fails you will need to RMA. :(

 

 

This has been bugging me since  i first got the H100i, but other PC problems kept me from looking into it, hopefully your solution works :D.

 

I am doing RMA. I cant figure out what is happening. it should be a really straight forward installation.!!

Link to post
Share on other sites

I am doing RMA. I cant figure out what is happening. it should be a really straight forward installation.!!

Safest thing to do


Main Rig:

Spoiler

 

AMD FX 8320 @4.5Ghz  8GB Corsair Vengeance LP Blu 1600Mhz Sapphire Vapor X HD 7950 3GB 120GB Samsung 840 Evo  Asus M5A99FX PRO R2.0 

Corsair 600T Graphite Corsair H80i Corsair CX600 2x LG 24 inch LED @1080p Logitech G700s CM Quickfire TK (Brown)

 

Home Server:

Spoiler

A4 6300 @3.7Ghz 5GB Kingston/Crucial DDR3 1600Mhz 1TB WD Green 2TB Seagate Barracuda

500GB WD Blue 2x Gigabit NIC Antec 300 OCZ 500w PSU Gigabyte F2A68HM-HD2 R1.1

 

 

 

 

Link to post
Share on other sites
Posted · Original PosterOP

I updated my firmware and now the H80i doesn't show up anymore, it did before

Did you use the correct firmware version?

Try the other one if possible.


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites

Can someone please help me with this. 

 

When I first built this PC I couldn't get my H80i to show up but I somehow fixed it (can't remember how)

Decided to format the PC last night and reinstall everything. Installed old corsairlink program and suddenly h80i wasn't showing up again. So decided to get the latest Corsairlink update, all my devices are showing but the h80i fans.

 

I'm running Windows 7, I have no clue how to fix it this time.

Link to post
Share on other sites
Posted · Original PosterOP

Can someone please help me with this. 

 

When I first built this PC I couldn't get my H80i to show up but I somehow fixed it (can't remember how)

Decided to format the PC last night and reinstall everything. Installed old corsairlink program and suddenly h80i wasn't showing up again. So decided to get the latest Corsairlink update, all my devices are showing but the h80i fans.

 

I'm running Windows 7, I have no clue how to fix it this time.

Are the fans running or are they stopped?


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites
Posted · Original PosterOP

Running

Can you try reuploading the firmware for it?


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×