Jump to content

Help me choose parts for my rig.

Budget (including currency): 600 USD

Country: I am from Bangladesh

Games, programs or workloads that it will be used for: Moderate gaming, browsing, moderate 3D work.

Other details (existing parts lists, whether any peripherals are needed, what you're upgrading from, when you're going to buy, what resolution and refresh rate you want to play at, etc): 

No parts, no peripherals, upgrading from a laptop with i3-6006U with 4 gigs of Ram, Going to build in the next 2-3 months, 1080p@~100fps is enough.

 

Hello,
I lately am in need of a very small form factor PC and was deciding on some parts. But I can't decide which setup will be a better choice acc. to price.

Intel side- Intel 10th Gen Core i5-10400
            Asus ROG STRIX B460-G Gaming Intel 10th Gen Micro-ATX Motherboard
            2*TEAM DELTA UD 8GB 2666MHz RGB DDR4 Desktop RAM
            Netac N930E Pro 128GB NVMe M.2 2280 SSD
            Cooler MASTERAIR G200P Air CPU Cooler
            Total cost-$532

AMD side-   AMD Ryzen 5 2600
            Asus ROG STRIX B450-I GAMING AMD Mini ITX
            2*TEAM DELTA UD 8GB 2666MHz RGB DDR4 Desktop RAM
            Netac N930E Pro 128GB NVMe M.2 2280 SSD
            CRYORIG C7 CPU Cooler
            Total cost-$475

AMD costs less but then again I need a GPU for that. Can't decide which one either. And I don't think I can get a same power GPU for $50. Not currently planning on buying one for Intel side.

Also am struggling for a small PSU and case. Need to source those from somewhere.

Not going for another laptop cause I want it to be upgradable and I think for the price point going for a laptop is not good.

Link to comment
Share on other sites

Link to post
Share on other sites

if you can wait amd is going to release new cpus therefore the price of older ones will drop and nvidia with lower end rtx 3000 will drop price of older gpus

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, mahyar said:

if you can wait amd is going to release new cpus therefore the price of older ones will drop and nvidia with lower end rtx 3000 will drop price of older gpus

Bro, even the lowest 3060 and any 4000 series AMD CPU will make me go around double my budget....right?

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Mahir Istehad said:

Bro, even the lowest 3060 and any 4000 series AMD CPU will make me go around double my budget....right?

yes but with new parts price of older ones will drop

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, mahyar said:

yes but with new parts price of older ones will drop

Oooooohhh

Link to comment
Share on other sites

Link to post
Share on other sites

11 minutes ago, Mahir Istehad said:

            CRYORIG C7 CPU Cooler

dont get a cpu cooler for amd cpus , the stock cooler is amazing

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, alirafi321 said:

dont get a cpu cooler for amd cpus , the stock cooler is amazing

Oh, well then the cost drops to 454 USD. Going well so far.

Link to comment
Share on other sites

Link to post
Share on other sites

but if you want i can make a list with new components for you

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, mahyar said:

but if you want i can make a list with new components for you

Sure, just keep it in budget pls. It is a bit tight.

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, lais911 said:

Don’t buy a 2666mhz of Ram.. Try buying 3000/3200mhz ram

The CPUs won't be able to run at that speed. Intel chip goes to 2666 and Ryzen to 2933

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Mahir Istehad said:

The CPUs won't be able to run at that speed. Intel chip goes to 2666 and Ryzen to 2933

intel one yes but amd one can go up to 3200

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

Also I don't need OC cause it is gonna be small. Remember that Valkese build Linus did? Very similar to that size. Don't want it boiling under the tropical heat.

Link to comment
Share on other sites

Link to post
Share on other sites

yes they say but they can do 3200mhz 2933 is when al four memory channels are full

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

btw any reason for small case?

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, mahyar said:

btw any reason for small case?

Yeah, I want it to be extremely portable. Sorta like an alternative to my existing laptop.

Link to comment
Share on other sites

Link to post
Share on other sites

i put this together didnt choose any case or power supply because i dont know about parts availability   

 

 

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

15 minutes ago, mahyar said:

i put this together didnt choose any case or power supply because i dont know about parts availability   

 

 

This is great. Alot of flexibility for a case and PSU. thanks

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Mahir Istehad said:

This is great. Alot of flexibility for a case and PSU. thanks

your welcome :) 

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

Nice build from mahyar, just a note, if you are going to do 3D stuff (3DMAX, AutoCAD, Sketchup, Solidworks) you might want to get an nvidia gpu.

 

and remember to pick a good PSU PSU Tier List 4.0 rev. 14.4

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, Ma__ga said:

Nice build from mahyar, just a note, if you are going to do 3D stuff (3DMAX, AutoCAD, Sketchup, Solidworks) you might want to get an nvidia gpu.

 

and remember to pick a good PSU PSU Tier List 4.0 rev. 14.4

Hmmm Nvidia GPU huh, can you suggest any in the same price range?

Link to comment
Share on other sites

Link to post
Share on other sites

this might be a more optimal yet good build , its got 1.25 tb in total , and if u wanna save some money , u can get 4 gb version of the rx 570

Link to comment
Share on other sites

Link to post
Share on other sites

Assuming prices in Bangladesh are as inflated as they are in neighbouring countries like India and Pakistan, I would expect $600 to only get you $400 worth of components.

 

You're looking at an i3 9100F, H310 motherboard, 8GB of RAM - 16 if you're very lucky - and an RX 570 or a 1650 Super. 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Aereldor said:

Assuming prices in Bangladesh are as inflated as they are in neighbouring countries like India and Pakistan, I would expect $600 to only get you $400 worth of components.

 

You're looking at an i3 9100F, H310 motherboard, 8GB of RAM - 16 if you're very lucky - and an RX 570 or a 1650 Super. 

I know. The ones I posted are actually local values converted to USD.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×