Jump to content

IS SLOWER DUAL CHANNEL FASTER THEN A SINGLE FAST CHANNEL Ram

Uofm49426

The scenario you buy a laptop or pc single channel ram  8gb but it ddr4 3200 mhz the pc has only 2 slots you have 2 matching dimms but its only ddr4 2400 from old laptop dual channel. You are not going to have money to match the  3200 stick for a long time do you mix and match 3200 with one of the 2400 or do you pull the 3200 mhz and uses the 2 8gb 2400. what would be better faster

Link to comment
Share on other sites

Link to post
Share on other sites

3200 + 2400 should be equally fast as 2400 + 2400 since all memory runs at the same settings. Both will be faster than single channel (since 3200 is smaller than 2400x2)

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

2400 but laptop memory is sodimm so you cant put it into 99% of pcs

 

dual channel memory is equivalent to twice the speed of a single stick, so youd need 4800mhz single channel to match 2400mhz dual channel.

topics i need help on:

Spoiler

 

 

my "oops i bought intel right before zen 3 releases" build

CPU: Ryzen 5 3600 (placeholder)

GPU: Gigabyte 980ti Xtreme (also placeholder), deshroud w/ generic 1200rpm 120mm fans x2, stock bios 130% power, no voltage offset: +70 core +400 mem 

Memory: 2x16gb GSkill Trident Z RGB 3600C16, 14-15-30-288@1.45v

Motherboard: Asus ROG Strix X570-E Gaming

Cooler: Noctua NH-D15S w/ white chromax bling
OS Drive: Samsung PM981 1tb (OEM 970 Evo)

Storage Drive: XPG SX8200 Pro 2tb

Backup Storage: Seagate Barracuda Compute 4TB

PSU: Seasonic Prime Ultra Titanium 750W w/ black/white Cablemod extensions
Case: Fractal Design Meshify C Dark (to be replaced with a good case shortly)

basically everything was bought used off of reddit or here, only new component was the case. absolutely nutty deals for some of these parts, ill have to tally it all up once it's "done" :D 

Link to comment
Share on other sites

Link to post
Share on other sites

But a single 2400 4DDR would be 1200mhz you need 2 to get 2400 at least that's what I have always been told so 3200mhz would be equal to 1600mhz in single channel 2400 is higher then 1600mhz 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×