Laggy PC with strong components

[Moonzy]

Just now, Kijlok25 said:

What about other stuff. Last time I enabled XMP with the OC i did my  PC didn't load up. 

that's because the subtiming of the XMP couldnt be run at such high freq probably

 

try running stock first without any OC, with just XMP enabled.

 

im not too familiar with specific OC-ing parameters, so i can't comment on whether what you're setting is right or wrong.

[Kijlok25]

1 minute ago, Moonzy said:

that's because the subtiming of the XMP couldnt be run at such high freq probably

 

try running stock first without any OC, with just XMP enabled.

 

im not too familiar with specific OC-ing parameters, so i can't comment on whether what you're setting is right or wrong.

But with 3.6MHZ i will get lower FPS. I Want to get MAX and stable from my components. And in XMP There are levels 1-3 which one should I enable

[Kijlok25]

Just now, Kijlok25 said:

But with 3.6MHZ i will get lower FPS. I Want to get MAX and stable from my components

 

[Moonzy]

1 minute ago, Kijlok25 said:

I Want to get MAX and stable from my components

right now you're having issue, adding more potential point of failure is not a good idea, so at least get your PC working fine first before attempt OC-ing

 

2 minutes ago, Kijlok25 said:

And in XMP There are levels 1-3 which one should I enable

uhh... profile #1

[Kijlok25]

3 minutes ago, Moonzy said:

right now you're having issue, adding more potential point of failure is not a good idea, so at least get your PC working fine first before attempt OC-ing

 

uhh... profile #1

I set to level 1.

But there is System Memory Multiplier level -3

[Moonzy]

1 minute ago, Kijlok25 said:

I set to level 1.

But there is System Memory Multiplier level -3

can i get a photo?

[Kijlok25]

3 minutes ago, Moonzy said:

can i get a photo?

[Moonzy]

Just now, Kijlok25 said:

 

mmm tell you what, let's not enable XMP first, reset your bios and boot straight into windows

[Kijlok25]

2 minutes ago, Moonzy said:

mmm tell you what, let's not enable XMP first, reset your bios and boot straight into windows

After I enabled it my Pc took a long time to start. And now when I put back optimized defaults  it now showing that windows didn't start correctly

[Moonzy]

Just now, Kijlok25 said:

And now when I put back optimized defaults  it now showing that windows didn't start correctly

that's normal

 

can i get a screenshot of ryzen master again? without applying any overclocks or anything

i wanna see the current settings before we proceed further

[Kijlok25]

Just now, Moonzy said:

that's normal

 

can i get a screenshot of ryzen master again? without applying any overclocks or anything

i wanna see the current settings before we proceed further

My pc doesn't boot up. Its prepering automatic repair. And then says that it failed and couldn't repair it WTF

[Moonzy]

1 minute ago, Kijlok25 said:

My pc doesn't boot up. Its prepering automatic repair. And then says that it failed and couldn't repair it WTF

hmm... that's not supposed to happen unless something went wrong during the last shut down process

 

try rebooting it again

[Kijlok25]

Just now, Moonzy said:

hmm... that's not supposed to happen unless something went wrong during the last shut down process

 

try rebooting it again

Tried. Nothing works. Wtf

[Moonzy]

Just now, Kijlok25 said:

Tried. Nothing works. Wtf

ah geez, do you have another working computer and a spare hard disk?

[Kijlok25]

1 minute ago, Moonzy said:

ah geez, do you have another working computer and a spare hard disk?

Do i need to reinstall the whole thing? I have important files there

[Moonzy]

2 minutes ago, Kijlok25 said:

Do i need to reinstall the whole thing? I have important files there

im thinking of using another PC to grab the files

or use another hard disk to install windows on, and grab your files

or you could try the software repair and see if it works

[Kijlok25]

1 minute ago, Moonzy said:

im thinking of using another PC to grab the files

or use another hard disk to install windows on, and grab your files

or you could try the software repair and see if it works

I set a system restore. 

Its now Restoring the files. I just a fucking stable PC with great performance. Why is so unatable. Litreally I  fucked up my pc now

[Moonzy]

Just now, Kijlok25 said:

I set a system restore. 

Its now Restoring the files. I just a fucking stable PC with great performance. Why is so unatable. Litreally I  fucked up my pc now

it can happen if you dont validate your OC well and run them unstably

[Kijlok25]

Just now, Moonzy said:

1 minute ago, Moonzy said:

it can happen if you dont validate your OC well and run them unstably

 

Yep its fucked. Even restore point doesn't work. It was successful.  But same issue. Can't even boot to windows

[Blade_792]

It could be the ram usually ryzen prefer faster ram

[Kijlok25]

5 minutes ago, Moonzy said:

it can happen if you dont validate your OC well and run them unstably

Ok so i booted up from something else. And  I got my pc back. Now I go bios. Get optimized defaults. Go back to my PC and run a stabilty check to see temps. Then we enable XMP? and then what?.btw thank you so much for ur help

[Moonzy]

Just now, Kijlok25 said:

Yep its fucked. Even restore point doesn't work. It was successful.  But same issue. Can't even boot to windows

you might need other's assistance with this PC now if you dont have another one lying around

 

 

@TofuHaroto @Mateyyy any insight?

tl;dr:

Spec: R5 3600 + 2070S, RAM is 2400MHz 2x8gb(OC to 3200MHZ VIA BIOS)

 

- OP stated his game was stuttery

- OP ran 2400MHz ram at 3200MHz

- OP CPU temp was at 90c with 1.15v, ryzen 5 3600 is the CPU (with Pure Rock cooler, stock cooler is 105c)

- Opening side panel dropped temp by 10c (potential airflow issue)

- reseting bios caused OS to corrupt and be unbootable.

 

This is his OC settings(?):

44 minutes ago, Kijlok25 said:

I dont remember.  And also. I openned up BIOS rn and my cpu is getting 1.296 -1.3V and its on 41C .

Memory on 3200Mhz and getting 

1.368 A/B volts

What is XMP and should I enable it?

My cpu clock control is set to auto

Memory Timing mode is set to normal.

My voltage settings: Dynamic VCore +0.186

Dynamic VCore SOC(DVID) is +0.186V

And my Dram Voltage A/B CH is set to 1.350V

 

1 minute ago, Blade_792 said:

It could be the ram usually ryzen prefer faster ram

it runs games faster with it, but it doesnt crap out like it did on slower RAM for sure.

[Kijlok25]

2 minutes ago, Moonzy said:

you might need other's assistance with this PC now if you dont have another one lying around

 

 

@TofuHaroto @Mateyyy any insight?

tl;dr:

Spec: R5 3600 + 2070S, RAM is 2400MHz 2x8gb(OC to 3200MHZ VIA BIOS)

 

- OP stated his game was stuttery

- OP ran 2400MHz ram at 3200MHz

- OP CPU temp was at 90c with 1.15v, ryzen 5 3600 is the CPU (with Pure Rock cooler, stock cooler is 105c)

- Opening side panel dropped temp by 10c (potential airflow issue)

- reseting bios caused OS to corrupt and be unbootable.

 

This is his OC settings(?):

 

it runs games faster with it, but it doesnt crap out like it did on slower RAM for sure.

Ok for some reason optimized defaults fuck up my PC. It boots with windows boot manager. And this boot method is fucked up

[Moonzy]

Just now, Kijlok25 said:

Ok for some reason optimized defaults fuck up my PC.

it does not boot into windows?

 

shut down, power off from the wall, wait 15 seconds, then try resetting the CMOS manually by shorting the CLR_CMOS pin in the PC (normally bottom right in the motherboard, refer to manual) for 5 seconds.

[Kijlok25]

Just now, Moonzy said:

it does not boot into windows?

 

shut down, power off from the wall, wait 15 seconds, then try resetting the CMOS manually by shorting the CLR_CMOS pin in the PC (normally bottom right in the motherboard, refer to manual) for 5 seconds.

I can just manually boot into other option and it works.