Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
kelvinhall05

Running F@H headless and work unit requests timing out

Recommended Posts

Posted · Original PosterOP

Hi guys. Trying to get F@H running on my desktop and my server after months of not having done any folding, but I'm running to a few problems.

 

My desktop is folding fine so far, but the WU requests for my GPU slot keep timing out. I've let it retry for half an hour now and it's not working so I'm assuming there is something wrong.

15:16:58:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:19:08:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
15:21:17:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:23:27:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
15:25:37:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:27:46:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
15:29:56:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:32:06:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
15:34:15:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:36:25:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
15:38:35:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:40:45:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
15:45:28:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:47:38:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out

The other problem I'm having is with my server running Ubuntu Server. I am trying to get the client running headless and although it appears to be working fine (as evident by looking at temps, util, fan speed, and just hearing the damn thing lol) is that I am unable to connect to the web interface with my desktop. Also, when I try to start the FAHClient service, it appears to start fine but init.d says it failed. No other info, just "failed". Here is my config file:

<config>
  <!-- Folding Slot Configuration -->
  <cause v='COVID_19'/>
  <gpu v='true'/>

  <!-- Slot Control -->
  <power v='full'/>

  <!-- User Information -->
  <passkey v='[censored]'/>
  <team v='223518'/>
  <user v='kelvinhall05'/>

   <!-- Folding Slots -->
  <slot id='0' type='CPU'>
    <cpus v='12'/>
  </slot>
  <slot id='1' type='GPU'>
    <gpu-index v='0'/>
  </slot>
  <slot id='2' type='GPU'>
    <gpu-index v='1'/>
  </slot>

  <!-- Grant remote web access to the following IP -->
  <allow>192.168.0.13</allow>
  <web-allow>192.168.0.13</web-allow>
</config>

My desktop is at 192.168.0.13 yet the connection times out when I try to go to http://192.168.0.10:7396 (the IP of my server).

 

Any ideas? Thanks!


Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 4x4GB G.Skill DDR3 1866MHz GPU: Asus RX 570 Strix Storage: WD Blue 1TB and a 128GB Kingston UV400 PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech G403 Prodigy Wireless Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE

 

 

 

 

i use arch btw

Link to post
Share on other sites
33 minutes ago, kelvinhall05 said:

My desktop is folding fine so far, but the WU requests for my GPU slot keep timing out. I've let it retry for half an hour now and it's not working so I'm assuming there is something wrong.

If it's a Linux system, it's a know bug:

https://github.com/FoldingAtHome/fah-issues/issues/1309

 

It's a symptom of 2 things:

No WUs available

GPU not supported

 

Check the GPU.txt file and search if your gpu is present. 

You might also want to check that you have the latest beta version of the software, as it should have fixes for this issue. 

You can grab it from here: https://foldingathome.org/beta/

 

 

As for the remote access, try changing this line as follows:

  <!-- Grant remote web access to the following IP -->
  <allow v='192.168.0.13'/>
  <web-allow>192.168.0.13</web-allow>

MOTHERBOARD: ASRock H97 Pro4 CPU: Intel Core i5-4460 @3.30 Ghz (-75mV Core // -5mV Cache) RAM: 32Gb (4x8Gb) Kingstone HyperX Fury DDR3@1600 Mhz (9-9-9-27)

GPU: MSI 390 8Gb Gaming Edition (-5mV // +80mhz core // +120mhz memory)  PSU: XFX TS 650w Bronze Enermax Revolution D.F. 650w 80+ Gold

STORAGE: SSD Samsung EVO 850 250Gb // HDD WD Green 1Tb // HDD WD Blue 4Tb // HDD WD Blue 160Gb MOUSE: Logitech G502 Proteus Spectrum

MONITORS: Samsung CFG7 C24FG7xFQ @144hz // Samsung SyncMaster TA350 LT23A350 @60hz

CASE: Fractal Design Define R5 Windowed OS: Windows 10 Pro x64 Bit // Manjaro

Link to post
Share on other sites
Posted · Original PosterOP
11 minutes ago, Parideboy said:

If it's a Linux system, it's a know bug:

https://github.com/FoldingAtHome/fah-issues/issues/1309

 

It's a symptom of 2 things:

No WUs available

GPU not supported

 

Check the GPU.txt file and search if your gpu is present. 

You might also want to check that you have the latest beta version of the software, as it should have fixes for this issue. 

You can grab it from here: https://foldingathome.org/beta/

 

 

As for the remote access, try changing this line as follows:


  <!-- Grant remote web access to the following IP -->
  <allow v='192.168.0.13'/>
  <web-allow>192.168.0.13</web-allow>

Yes, I use Arch (btw) so I will check gpu.txt. Where do I find it?

 

 

I tried editing the config file like that and it still times out. I've also noticed this in the log for the fahclient in init.d:

16:51:02:WU02:FS01:Starting
16:51:02:ERROR:WU02:FS01:Failed to start core: OpenCL device matching slot 1 not found, make sure the OpenCL driver is installed or try setting 'opencl-index' manually
16:51:02:WU03:FS02:Starting
16:51:02:ERROR:WU03:FS02:Failed to start core: OpenCL device matching slot 2 not found, make sure the OpenCL driver is installed or try setting 'opencl-index' manually

I don't remember seeing this before I installed ocl-icd-opencl-dev. GPUs still appear to be utilized by F@H, both before and after I installed this package.


Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 4x4GB G.Skill DDR3 1866MHz GPU: Asus RX 570 Strix Storage: WD Blue 1TB and a 128GB Kingston UV400 PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech G403 Prodigy Wireless Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE

 

 

 

 

i use arch btw

Link to post
Share on other sites
6 minutes ago, kelvinhall05 said:

Yes, I use Arch (btw) so I will check gpu.txt. Where do I find it?

Depends on the version of the client is installed, take a look in those directories:

 

/opt/fah/

/etc/foldingathome

/var/lib/foldingathome

 

12 minutes ago, kelvinhall05 said:

I've also noticed this in the log for the fahclient in init.d:

This is on the server, right? You're right, that error usually refers to wrong/not compatible opencl packages.

You can follow this guide to get the right packages for fah:

 

27 minutes ago, kelvinhall05 said:

I tried editing the config file like that and it still times out.

 

Edit this line aswell, and make sure to restart the client afterwards

  <!-- Grant remote web access to the following IP -->
  <allow v='192.168.0.13'/>
  <web-allow v='192.168.0.13'/>

MOTHERBOARD: ASRock H97 Pro4 CPU: Intel Core i5-4460 @3.30 Ghz (-75mV Core // -5mV Cache) RAM: 32Gb (4x8Gb) Kingstone HyperX Fury DDR3@1600 Mhz (9-9-9-27)

GPU: MSI 390 8Gb Gaming Edition (-5mV // +80mhz core // +120mhz memory)  PSU: XFX TS 650w Bronze Enermax Revolution D.F. 650w 80+ Gold

STORAGE: SSD Samsung EVO 850 250Gb // HDD WD Green 1Tb // HDD WD Blue 4Tb // HDD WD Blue 160Gb MOUSE: Logitech G502 Proteus Spectrum

MONITORS: Samsung CFG7 C24FG7xFQ @144hz // Samsung SyncMaster TA350 LT23A350 @60hz

CASE: Fractal Design Define R5 Windowed OS: Windows 10 Pro x64 Bit // Manjaro

Link to post
Share on other sites
Posted · Original PosterOP
7 minutes ago, Parideboy said:
36 minutes ago, kelvinhall05 said:

 

Depends on the version of the client is installed, take a look in those directories:

 

/opt/fah/

/etc/foldingathome

/var/lib/foldingathome

My GPU is present there. I have also now noticed that after letting it sit for a while, I now have these errors for the GPU slot:

16:59:32:WU01:FS01:0x22:ERROR:126: Bad platformId size.
16:59:32:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
16:59:38:WU02:FS01:0x22:ERROR:126: Bad platformId size.
16:59:38:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
16:59:43:WU01:FS01:0x22:ERROR:126: Bad platformId size.
16:59:43:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
16:59:48:WU02:FS01:0x22:ERROR:126: Bad platformId size.
16:59:48:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
16:59:52:WU01:FS01:0x22:ERROR:126: Bad platformId size.
16:59:53:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
16:59:57:WU02:FS01:0x22:ERROR:126: Bad platformId size.
16:59:57:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
17:00:00:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
17:00:04:WU02:FS01:0x22:ERROR:126: Bad platformId size.
17:00:05:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
17:00:09:WU01:FS01:0x22:ERROR:126: Bad platformId size.
17:00:09:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
17:00:13:WU02:FS01:0x22:ERROR:126: Bad platformId size.
17:00:13:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)

I will check that guide out and let you know if it works and fixes the above errors (assuming they are related to OpenCL), as well as if editing the server's config file will allow me to connect with the web control. Thanks!


Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 4x4GB G.Skill DDR3 1866MHz GPU: Asus RX 570 Strix Storage: WD Blue 1TB and a 128GB Kingston UV400 PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech G403 Prodigy Wireless Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE

 

 

 

 

i use arch btw

Link to post
Share on other sites
Posted · Original PosterOP

@Parideboy So I've managed to get the GPU on my desktop working, thanks! However, I'm still having problems with connecting to my server. Here is the updated config:

<config>
  <!-- Folding Slot Configuration -->
  <gpu v='true'/>

  <!-- Slot Control -->
  <power v='full'/>

  <!-- User Information -->
  <passkey v='[censored]'/>
  <team v='223518'/>
  <user v='kelvinhall05'/>

  <!-- Folding Slots -->
  <slot id='0' type='CPU'>
    <cpus v='8'/>
  </slot>
  <slot id='1' type='GPU'>
    <gpu-index v='0'/>
  </slot>
  <slot id='2' type='GPU'>
    <gpu-index v='1'/>
  </slot>

  <!-- Grant remote web access to the following IP -->
  <allow v='192.168.0.13'/>
  <web-allow v='192.168.0.13'/>
</config>

Any more ideas, or at least a way to confirm that both GPUs and full CPU is folding?


Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 4x4GB G.Skill DDR3 1866MHz GPU: Asus RX 570 Strix Storage: WD Blue 1TB and a 128GB Kingston UV400 PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech G403 Prodigy Wireless Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE

 

 

 

 

i use arch btw

Link to post
Share on other sites
23 minutes ago, kelvinhall05 said:

@Parideboy So I've managed to get the GPU on my desktop working, thanks! However, I'm still having problems with connecting to my server. Here is the updated config:

 

Any more ideas, or at least a way to confirm that both GPUs and full CPU is folding?

I'm glad you were able to find a solution.

If you have FAHControl on your desktop you can control the folding on the server, just add this to the config:

 

<command-allow-no-pass v='192.168.0.13'/>

From the desktop on the Control program, just press the + button, give a name to the client, put the server IP (192.168.0.10) and leave the port to 36330

 

If this doesn't work, try adding 127.0.0.1 to the IP ranges of the config:

  <!-- Grant remote web access to the following IP -->
  <allow v='127.0.0.1 192.168.0.13'/>
  <web-allow v='127.0.0.1 192.168.0.13'/>
  <command-allow-no-pass v='127.0.0.1 192.168.0.13'/>

 


MOTHERBOARD: ASRock H97 Pro4 CPU: Intel Core i5-4460 @3.30 Ghz (-75mV Core // -5mV Cache) RAM: 32Gb (4x8Gb) Kingstone HyperX Fury DDR3@1600 Mhz (9-9-9-27)

GPU: MSI 390 8Gb Gaming Edition (-5mV // +80mhz core // +120mhz memory)  PSU: XFX TS 650w Bronze Enermax Revolution D.F. 650w 80+ Gold

STORAGE: SSD Samsung EVO 850 250Gb // HDD WD Green 1Tb // HDD WD Blue 4Tb // HDD WD Blue 160Gb MOUSE: Logitech G502 Proteus Spectrum

MONITORS: Samsung CFG7 C24FG7xFQ @144hz // Samsung SyncMaster TA350 LT23A350 @60hz

CASE: Fractal Design Define R5 Windowed OS: Windows 10 Pro x64 Bit // Manjaro

Link to post
Share on other sites
Posted · Original PosterOP
15 minutes ago, Parideboy said:

I'm glad you were able to find a solution.

If you have FAHControl on your desktop you can control the folding on the server, just add this to the config:

 


<command-allow-no-pass v='192.168.0.13'/>

From the desktop on the Control program, just press the + button, give a name to the client, put the server IP (192.168.0.10) and leave the port to 36330

 

If this doesn't work, try adding 127.0.0.1 to the IP ranges of the config:


  <!-- Grant remote web access to the following IP -->
  <allow v='127.0.0.1 192.168.0.13'/>
  <web-allow v='127.0.0.1 192.168.0.13'/>
  <command-allow-no-pass v='127.0.0.1 192.168.0.13'/>

 

The F@H client times out trying to connect, however, I noticed that with 127.0.0.1 added to the IP range, I now get an error 403 access denied when trying to access the web console for my server instead of it just timing out. Progress? lol


Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 4x4GB G.Skill DDR3 1866MHz GPU: Asus RX 570 Strix Storage: WD Blue 1TB and a 128GB Kingston UV400 PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech G403 Prodigy Wireless Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE

 

 

 

 

i use arch btw

Link to post
Share on other sites
14 minutes ago, kelvinhall05 said:

The F@H client times out trying to connect, however, I noticed that with 127.0.0.1 added to the IP range, I now get an error 403 access denied when trying to access the web console for my server instead of it just timing out. Progress? lol

For the sake of troubleshooting, let's just YOLO it.

 

Let's give it the full range of local IPs, we can revert that later

 

  <!-- Grant remote web access to the following IP -->
  <allow v='127.0.0.1 192.168.0.0/24'/>
  <web-allow v='127.0.0.1 192.168.0.0/24'/>
  <command-allow-no-pass v='127.0.0.1 192.168.0.0/24'/>

PS: make sure to give it one of those:

service --status-all | grep '\[ + \]'
systemctl restart <name>

 Search for the service and restart it


MOTHERBOARD: ASRock H97 Pro4 CPU: Intel Core i5-4460 @3.30 Ghz (-75mV Core // -5mV Cache) RAM: 32Gb (4x8Gb) Kingstone HyperX Fury DDR3@1600 Mhz (9-9-9-27)

GPU: MSI 390 8Gb Gaming Edition (-5mV // +80mhz core // +120mhz memory)  PSU: XFX TS 650w Bronze Enermax Revolution D.F. 650w 80+ Gold

STORAGE: SSD Samsung EVO 850 250Gb // HDD WD Green 1Tb // HDD WD Blue 4Tb // HDD WD Blue 160Gb MOUSE: Logitech G502 Proteus Spectrum

MONITORS: Samsung CFG7 C24FG7xFQ @144hz // Samsung SyncMaster TA350 LT23A350 @60hz

CASE: Fractal Design Define R5 Windowed OS: Windows 10 Pro x64 Bit // Manjaro

Link to post
Share on other sites
Posted · Original PosterOP
25 minutes ago, Parideboy said:

For the sake of troubleshooting, let's just YOLO it.

 

Let's give it the full range of local IPs, we can revert that later

 


  <!-- Grant remote web access to the following IP -->
  <allow v='127.0.0.1 192.168.0.0/24'/>
  <web-allow v='127.0.0.1 192.168.0.0/24'/>
  <command-allow-no-pass v='127.0.0.1 192.168.0.0/24'/>

PS: make sure to give it one of those:


service --status-all | grep '\[ + \]'
systemctl restart <name>

 Search for the service and restart it

Still get denied :(

 

I forgot to post systemctl status output in this thread so far, so here it is:

● FAHClient.service - LSB: Folding@home Client
   Loaded: loaded (/etc/init.d/FAHClient; generated)
   Active: failed (Result: exit-code) since Mon 2020-08-31 15:02:27 EDT; 48s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 2829 ExecStop=/etc/init.d/FAHClient stop (code=exited, status=0/SUCCESS)
  Process: 2853 ExecStart=/etc/init.d/FAHClient start (code=exited, status=1/FAILURE)
    Tasks: 23 (limit: 4915)
   CGroup: /system.slice/FAHClient.service
           ├─2871 /usr/bin/FAHClient /etc/fahclient/config.xml --run-as fahclient --pid-file=/var/run/fahclient.pid --daemon
           ├─2874 /usr/bin/FAHClient --child /etc/fahclient/config.xml --run-as fahclient --pid-file=/var/run/fahclient.pid --daemon
           ├─2894 /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit-sse2/a7-0.0.19/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 706 -lifeline 2874 -checkpoint 15 -np 8
           └─2898 /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit-sse2/a7-0.0.19/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 706 -lifeline 2894 -checkpoint 15 -np 8

Aug 31 15:02:27 cheesegrater systemd[1]: Starting LSB: Folding@home Client...
Aug 31 15:02:27 cheesegrater FAHClient[2853]: Starting fahclient ... FAIL
Aug 31 15:02:27 cheesegrater systemd[1]: FAHClient.service: Control process exited, code=exited status=1
Aug 31 15:02:27 cheesegrater systemd[1]: FAHClient.service: Failed with result 'exit-code'.
Aug 31 15:02:27 cheesegrater systemd[1]: Failed to start LSB: Folding@home Client.
kelvin@cheesegrater:~$ 

I'm not sure why it's always failed to start/be active because it's very obviously running.


Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 4x4GB G.Skill DDR3 1866MHz GPU: Asus RX 570 Strix Storage: WD Blue 1TB and a 128GB Kingston UV400 PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech G403 Prodigy Wireless Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE

 

 

 

 

i use arch btw

Link to post
Share on other sites

Can you by any chance reboot the system? At the very least the control through the client should work


MOTHERBOARD: ASRock H97 Pro4 CPU: Intel Core i5-4460 @3.30 Ghz (-75mV Core // -5mV Cache) RAM: 32Gb (4x8Gb) Kingstone HyperX Fury DDR3@1600 Mhz (9-9-9-27)

GPU: MSI 390 8Gb Gaming Edition (-5mV // +80mhz core // +120mhz memory)  PSU: XFX TS 650w Bronze Enermax Revolution D.F. 650w 80+ Gold

STORAGE: SSD Samsung EVO 850 250Gb // HDD WD Green 1Tb // HDD WD Blue 4Tb // HDD WD Blue 160Gb MOUSE: Logitech G502 Proteus Spectrum

MONITORS: Samsung CFG7 C24FG7xFQ @144hz // Samsung SyncMaster TA350 LT23A350 @60hz

CASE: Fractal Design Define R5 Windowed OS: Windows 10 Pro x64 Bit // Manjaro

Link to post
Share on other sites
Posted · Original PosterOP
1 hour ago, Parideboy said:

Can you by any chance reboot the system? At the very least the control through the client should work

I have rebooted several times and always get this result.


Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 4x4GB G.Skill DDR3 1866MHz GPU: Asus RX 570 Strix Storage: WD Blue 1TB and a 128GB Kingston UV400 PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech G403 Prodigy Wireless Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE

 

 

 

 

i use arch btw

Link to post
Share on other sites
42 minutes ago, kelvinhall05 said:

I have rebooted several times and always get this result.

I have a very similar config (minus the web-allow part) and I can see it in my client.

Can you post the unit file?

 

 


MOTHERBOARD: ASRock H97 Pro4 CPU: Intel Core i5-4460 @3.30 Ghz (-75mV Core // -5mV Cache) RAM: 32Gb (4x8Gb) Kingstone HyperX Fury DDR3@1600 Mhz (9-9-9-27)

GPU: MSI 390 8Gb Gaming Edition (-5mV // +80mhz core // +120mhz memory)  PSU: XFX TS 650w Bronze Enermax Revolution D.F. 650w 80+ Gold

STORAGE: SSD Samsung EVO 850 250Gb // HDD WD Green 1Tb // HDD WD Blue 4Tb // HDD WD Blue 160Gb MOUSE: Logitech G502 Proteus Spectrum

MONITORS: Samsung CFG7 C24FG7xFQ @144hz // Samsung SyncMaster TA350 LT23A350 @60hz

CASE: Fractal Design Define R5 Windowed OS: Windows 10 Pro x64 Bit // Manjaro

Link to post
Share on other sites

<!-- HTTP Server -->
<allow v='127.0.0.1 192.168.0.0/24'/>

<!-- Remote Command Server -->
<command-allow-no-pass v='127.0.0.1 192.168.0.0/24'/>

 

Try replacing your remote access lines with the above.

 

The only way I can think of checking CPU/GPU usage is using top

On 8/31/2020 at 1:47 PM, kelvinhall05 said:

@Parideboy So I've managed to get the GPU on my desktop working, thanks! However, I'm still having problems with connecting to my server. Here is the updated config:


<config>
  <!-- Folding Slot Configuration -->
  <gpu v='true'/>

  <!-- Slot Control -->
  <power v='full'/>

  <!-- User Information -->
  <passkey v='[censored]'/>
  <team v='223518'/>
  <user v='kelvinhall05'/>

  <!-- Folding Slots -->
  <slot id='0' type='CPU'>
    <cpus v='8'/>
  </slot>
  <slot id='1' type='GPU'>
    <gpu-index v='0'/>
  </slot>
  <slot id='2' type='GPU'>
    <gpu-index v='1'/>
  </slot>

  <!-- Grant remote web access to the following IP -->
  <allow v='192.168.0.13'/>
  <web-allow v='192.168.0.13'/>
</config>

Any more ideas, or at least a way to confirm that both GPUs and full CPU is folding?

 


My Folding Stats

My BOINC Stats

 

 

VelosterN:

AMD Ryzen 7 3800X - Asus ROG Strix X570-E Gaming - Corsair Vengeance RGB Pro 3200Mhz 32GB - Asus ROG Strix Gaming 5700 XT OC

Cooler Master MasterCase Pro 5 - Samsung 970 Evo Plus 250GB M.2-2280 NVMe - Samsung 970 Pro 512GB M.2-2280 NVMe - Samsung 860 Pro 256 GB 2.5" SSD X2

EVGA P2 80+ Platinum 850Watt PSU - BenQ XL2730Z 27.0" 2560x1440 144 Hz - Corsair H115i

Corsair K70 LUX - Logitech G502 Proteus Spectrum - HyperX Cloud Revolver S

Windows 10 Professional Build 1909

BettyBoop:

AMD Ryzen 5 2600X - Asus ROG Strix B450-I Gaming - Corsair Vengeance LPX 3000Mhz 16GB - AMD HD7950 - Fractal Design Core 500

Samsung 860 Pro 512GB Sata - EVGA 550GM 80+ Gold 550Watt SFX PSU - be quiet! Dark Rock 4

Windows 10 Professional Build 1909

TestBench:

Intel i7 6700K - Asus Maximus Hero VIII - Corsair Vengence LPX 3000MHz 16GB - MSI RX480 Gaming-X 8GB - Cooler Master 932 HAF

Seagate 250GB HDD - EVGA G2 80+ Gold 650Watt PSU - Corsair H100i

Ubuntu Linux 20.04 Beta LTS

HTPC:

HPE ProLiant ML10 Gen9 Server

Intel Xeon E3-1225v5 - Micron 2133Mhz 16GB ECC

Windows 10 Professional Build 1909

Link to post
Share on other sites
Posted · Original PosterOP

Gonna bump this thread, have some new info.

 

I've now installed Arch and so far everything appears to be working better (I prefer Arch over Ubuntu so much...but anyway), however, when I try to connect with a browser to the server's IP it denies me permission. Here is my config file:

config>
  <!-- Folding Slot Configuration -->
  <cause v='COVID_19'/>
  <gpu v='false'/>

  <!-- Slot Control -->
  <power v='full'/>

  <!-- User Information -->
  <passkey v='[censored]'/>
  <team v='223518'/>
  <user v='kelvinhall05'/>

  <!-- Folding Slots -->
  <slot id='0' type='CPU'/>
    <cpus v='8'/>
  </slot>
  <slot id='1' type='GPU'/>
    <gpu-index v='0'/>
  </slot>

  <!-- Grant remote web access to the following IP -->
  <allow v='127.0.0.1 192.168.0.13'/>
  <web-allow v='127.0.0.1 192.168.0.13'/>
  <command-allow-no-pass v='127.0.0.1 192.168.0.13'/>
</config>

Any ideas?


Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 4x4GB G.Skill DDR3 1866MHz GPU: Asus RX 570 Strix Storage: WD Blue 1TB and a 128GB Kingston UV400 PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech G403 Prodigy Wireless Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE

 

 

 

 

i use arch btw

Link to post
Share on other sites
1 hour ago, kelvinhall05 said:

Gonna bump this thread, have some new info.

 

I've now installed Arch and so far everything appears to be working better (I prefer Arch over Ubuntu so much...but anyway), however, when I try to connect with a browser to the server's IP it denies me permission. Here is my config file:


config>
  <!-- Folding Slot Configuration -->
  <cause v='COVID_19'/>
  <gpu v='false'/>

  <!-- Slot Control -->
  <power v='full'/>

  <!-- User Information -->
  <passkey v='[censored]'/>
  <team v='223518'/>
  <user v='kelvinhall05'/>

  <!-- Folding Slots -->
  <slot id='0' type='CPU'/>
    <cpus v='8'/>
  </slot>
  <slot id='1' type='GPU'/>
    <gpu-index v='0'/>
  </slot>

  <!-- Grant remote web access to the following IP -->
  <allow v='127.0.0.1 192.168.0.13'/>
  <web-allow v='127.0.0.1 192.168.0.13'/>
  <command-allow-no-pass v='127.0.0.1 192.168.0.13'/>
</config>

Any ideas?

<!-- HTTP Server -->
<allow v='127.0.0.1 192.168.1.0/24'/>
<!-- Remote Command Server -->
<command-allow-no-pass v='127.0.0.1 192.168.1.0/24'/>

I’ve noticed on newer flavours of Linux that you have to replace the init file (It’s broken) and make the fahclient user a member of the video group.

 

see: 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×