Jump to content

Ryzen 3600 b450m hdv

omar0o
By omar0o
in Troubleshooting
 Share
Posted

Hello, so i Just built a new System. It is a 3600, b450m hdv matx, g skill 3200 2x8. The gpu is my old one a GTX 970 and a powerspec power supply. When i boot it up all the fans spin even the gpu. But i don’t get any signal on my monitor. I switched the ram and isolated it and still wont. I doubt the gpu is dead because the fans spin and I had used it before. My suspicion is maybe i have to update the bios even though it said it was 3000 ready. I also cleared the cmos and took out the battery thing. Any suggestions ? 

image.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I was gonna suggest trouble shoot LEDs, but the manual doesn't mention any... makes it a lot harder to determine the problem... if you have another pc you can test the ram and gpu in that would help narrow it down

desktop

Spoiler

r5 3600,3450@0.9v (0.875v get) 4.2ghz@1.25v (1.212 get) | custom loop cpu&gpu 1260mm nexxos xt45 | MSI b450i gaming ac | crucial ballistix 2x8 3000c15->3733c15@1.39v(1.376v get) |Zotac 2060 amp | 256GB Samsung 950 pro nvme | 1TB Adata su800 | 4TB HGST drive | Silverstone SX500-LG

HTPC

Spoiler

HTPC i3 7300 | Gigabyte GA-B250M-DS3H | 16GB G Skill | Adata XPG SX8000 128GB M.2 | Many HDDs | Rosewill FBM-01 | Corsair CXM 450W

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

b450s are 3000 ready, as long as they have the bios version needed. 
When the 3000 ryzens came out last year, amd put out a new bios version for every b450 mb to be able to run those, so as long as you dont have that, you wont be able to run it.
What bios version do you currently have? you will need at least p2.30 to run it. 

Remember: If you want me to see your reply - Quote me!

 

If your question has been solved, please mark the thread as solved by choosing the answer that has helped you the most as the correct/solving one.

 

Please also use appropriate titles. Titles should be a short description of your situation to get people interested in looking at your thread. Titles such as "help" or "i have a problem" (etc.) will only lead to you getting less to zero help, cause people won't be able to tell what this thread is about and therefore don't bother looking into it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
14 minutes ago, JayBe said:

b450s are 3000 ready, as long as they have the bios version needed. 
When the 3000 ryzens came out last year, amd put out a new bios version for every b450 mb to be able to run those, so as long as you dont have that, you wont be able to run it.
What bios version do you currently have? you will need at least p2.30 to run it. 

You see i don’t know. I bought all of these components new from micro center. I assume it would have the bios needed but it won’t post. Everything else spins and runs but i wouldn’t think it has something to do with the cpu 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
20 minutes ago, Cyracus said:

I was gonna suggest trouble shoot LEDs, but the manual doesn't mention any... makes it a lot harder to determine the problem... if you have another pc you can test the ram and gpu in that would help narrow it down

The problem is i don’t.....

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
10 minutes ago, omar0o said:

You see i don’t know. I bought all of these components new from micro center. I assume it would have the bios needed but it won’t post. Everything else spins and runs but i wouldn’t think it has something to do with the cpu 

well, i would think that. Do you have any chance to get your hands a 2000 ryzen to see if that works? And to also then see what bios version you have? 

Remember: If you want me to see your reply - Quote me!

 

If your question has been solved, please mark the thread as solved by choosing the answer that has helped you the most as the correct/solving one.

 

Please also use appropriate titles. Titles should be a short description of your situation to get people interested in looking at your thread. Titles such as "help" or "i have a problem" (etc.) will only lead to you getting less to zero help, cause people won't be able to tell what this thread is about and therefore don't bother looking into it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

doestn seem like bios issue. so you have plugged in the mothebroad, cpu and gpu power, aswell as sata power for your drives?

 

And that motherboard isnt good for ryzen 5 3600. the VRM's cant probably hande that cpu even when stock.

 

try with 1 stick ram in both slots. then try with the other stick in both slots. if that doesnt help.

 

So the psu is working? it is really bad psu but it should work becuase the fans spin. the pgu likely works. motherboardl ikely works cuz the fans spin.

 

If the ram does work go to microcenter and just updtae the bios there. i still wouldnt think that that is a bios issue since it had ryzen 3000 sticker in it

 

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

| Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
17 minutes ago, SavageNeo said:

doestn seem like bios issue. so you have plugged in the mothebroad, cpu and gpu power, aswell as sata power for your drives?

 

And that motherboard isnt good for ryzen 5 3600. the VRM's cant probably hande that cpu even when stock.

 

try with 1 stick ram in both slots. then try with the other stick in both slots. if that doesnt help.

 

So the psu is working? it is really bad psu but it should work becuase the fans spin. the pgu likely works. motherboardl ikely works cuz the fans spin.

 

If the ram does work go to microcenter and just updtae the bios there. i still wouldnt think that that is a bios issue since it had ryzen 3000 sticker in it

 

I currently have a hard drive from my old system, an old bios was installed on it. Do you think maybe it interferes ?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
18 minutes ago, SavageNeo said:

doestn seem like bios issue. so you have plugged in the mothebroad, cpu and gpu power, aswell as sata power for your drives?

 

And that motherboard isnt good for ryzen 5 3600. the VRM's cant probably hande that cpu even when stock.

 

try with 1 stick ram in both slots. then try with the other stick in both slots. if that doesnt help.

 

So the psu is working? it is really bad psu but it should work becuase the fans spin. the pgu likely works. motherboardl ikely works cuz the fans spin.

 

If the ram does work go to microcenter and just updtae the bios there. i still wouldnt think that that is a bios issue since it had ryzen 3000 sticker in it

 

Also do you think I should get a different motherboard ? 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

So basically, the cpu was bad. Ended up switching the mobo to a gigabyte b450m aorus M. Thanks !!

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×