Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
y3llowduk

H115i non-rgb mounting hardware

 

2 hours ago, y3llowduk said:

I assume the inner holes on the bracket are for 115x, and that it would have came with a backplate for 115x?

Yes, the outer holes (when using the backplate) are used for LGA 1366.

 

2 hours ago, y3llowduk said:

I also noticed one of the 2011 mounting screws is bent, is this an intended feature to prevent the block falling off when removing?

The 2011 standoffs shouldn't be bent. 

 

2 hours ago, y3llowduk said:

Does anyone know what mounting hardware is included with a H115i non-rgb?

The Corsair H115i ships with the following:

  • 2 x SP140L PWM fans,
  • 8x long radiator screws,
  • 8 x short radiator screws,
  • 8 x washers,
  • 4 x LGA 115x/1366 standoffs,
  • 4 x LGA 2011/2011-3 standoffs,
  • 4 x AMD standoffs,
  • 4 x thumbscrews,
  • 1 x Corsair Link USB cable,
  • 1 x Intel backplate (not used for LGA 2011/2011-3),
  • 1 x Intel mounting bracket, and
  • 1 x AMD mounting bracket.

 

 

Recommended Posts

Posted · Original PosterOP

Hello All, Does anyone know what mounting hardware is included with a H115i non-rgb? I'm removing mine to sell and it only has the stuff in the pictures. It was on a 2011 board. I assume the inner holes on the bracket are for 115x, and that it would have came with a backplate for 115x? From what I remember 2011 boards all have pre-installed brackets, like the one I removed the cooler from. I also noticed one of the 2011 mounting screws is bent, is this an intended feature to prevent the block falling off when removing?

 

Tia, Duck

IMG_20200810_152733.jpg

IMG_20200810_152728.jpg

Link to post
Share on other sites
Posted · Best Answer

 

2 hours ago, y3llowduk said:

I assume the inner holes on the bracket are for 115x, and that it would have came with a backplate for 115x?

Yes, the outer holes (when using the backplate) are used for LGA 1366.

 

2 hours ago, y3llowduk said:

I also noticed one of the 2011 mounting screws is bent, is this an intended feature to prevent the block falling off when removing?

The 2011 standoffs shouldn't be bent. 

 

2 hours ago, y3llowduk said:

Does anyone know what mounting hardware is included with a H115i non-rgb?

The Corsair H115i ships with the following:

  • 2 x SP140L PWM fans,
  • 8x long radiator screws,
  • 8 x short radiator screws,
  • 8 x washers,
  • 4 x LGA 115x/1366 standoffs,
  • 4 x LGA 2011/2011-3 standoffs,
  • 4 x AMD standoffs,
  • 4 x thumbscrews,
  • 1 x Corsair Link USB cable,
  • 1 x Intel backplate (not used for LGA 2011/2011-3),
  • 1 x Intel mounting bracket, and
  • 1 x AMD mounting bracket.

 

 

Link to post
Share on other sites
Posted · Original PosterOP
41 minutes ago, Blai5e said:

 

Yes, the outer holes (when using the backplate) are used for LGA 1366.

 

The 2011 standoffs shouldn't be bent. 

 

The Corsair H115i ships with the following:

  • 2 x SP140L PWM fans,
  • 8x long radiator screws,
  • 8 x short radiator screws,
  • 8 x washers,
  • 4 x LGA 115x/1366 standoffs,
  • 4 x LGA 2011/2011-3 standoffs,
  • 4 x AMD standoffs,
  • 4 x thumbscrews,
  • 1 x Corsair Link USB cable,
  • 1 x Intel backplate (not used for LGA 2011/2011-3),
  • 1 x Intel mounting bracket, and
  • 1 x AMD mounting bracket.

 

 

Thankyou, that's perfect :)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×