Seeking High Airflow Case

[Elgorian]

Built a new PC about a month ago now, and while I LOVE my current case, the airflow is just... not great. 

Temps aren't out of control or anything, but due to the airflow it sounds like it's about to take flight I've got to push the fans so hard. 

Was looking for something a bit more open in the front, have just a small triangular slit in the front for air to actually get in. 

 

Would like to keep my current fan configuration so something that can support a 360mm rad with 3 120mm fans on it, 2 140mm fans and a 120mm fan in rear. 

 

Would ideally like to run the rad on top in exhaust instead of using it as intake in the front. So Ideally: 360mm Rad in top, 120mm in rear and the two 140's in the front for intake. 

 

Any suggestions would be much appreciated. MID-ATX or Full-ATX with a side panel. Doesn't need drive bays. 

[Elgorian]

That one was toward the top of my list, just wish the fans were visible in the front. 

[DailyProcrastinator]

26 minutes ago, Elgorian said:

That one was toward the top of my list, just wish the fans were visible in the front. 

Get RGB fans, as is at stock the Meshify needs more fans anyways.

 

Other good options with RGb fans include the Corsair 220T Airflow, Phanteks P400A and P500A, and the Cooler Master TD500 Mesh. 

[Elgorian]

2 minutes ago, TheDailyProcrastinator said:

Get RGB fans, as is at stock the Meshify needs more fans anyways.

Right, would be keeping my current fans, just moving to a different case with better airflow. 

Have

3x Corsair 120LLRGB in front pulling air through radiator

2x Corsair 140LLRGB top exhaust

1x Corsair 120LLRGB rear exhaust

 

This is the case I'm currently running: https://www.newegg.com/black-white-corsair-carbide-series-spec-omega-rgb-atx-mid-tower/p/N82E16811139121?item=N82E16811139121&source=region&nm_mc=knc-googleadwords-pc&cm_mmc=knc-googleadwords-pc-_-pla-_-cases+(computer+cases+-+atx+form)-_-N82E16811139121&gclid=Cj0KCQjw3s_4BRDPARIsAJsyoLOhBK2P9GQulEFia8EX7ZuNEOCR9cuVKrGe7JqFztZK0WhrBEKYjdEaAhj7EALw_wcB&gclsrc=aw.ds

 

and while I love it cosmetically, it has awful airflow. 

[DailyProcrastinator]

1 minute ago, Elgorian said:

-Snip-

The RGB will be visible through the front mesh if that was what you were wondering, I have my Mehsify fully decked out with Corsair ML fans. My favorite case I have owned to date. 

[Elgorian]

3 minutes ago, TheDailyProcrastinator said:

The RGB will be visible through the front mesh if that was what you were wondering, I have my Mehsify fully decked out with Corsair ML fans. My favorite case I have owned to date. 

Okay, cool. Pictures don't really do that part justice, just looks like solid black mesh. 

[MrBrightSyde]

3 minutes ago, Elgorian said:

Okay, cool. Pictures don't really do that part justice, just looks like solid black mesh. 

Look at this image I found. Shows that you can easily see RGB fans.

 

[FancyPants101]

I'm assuming you are not going for this: https://www.quietpc.com/nof-set-a43

But I've seen an rgb case with 2 bigger than 200mm fans. I can't find it though.

 

Or they were 200mm?! : https://www.coolermaster.com/catalog/legacy-products/cases/mastercase-h500/

Not sure if that was it or not.

Also: https://wccftech.com/xigmatek-announces-zest-pc-case/

 

No idea if this can be trusted. I wonder if they have done a video on it?

https://www.ebay.com/i/184285335506?chn=ps&var=691981989279&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=691981989279_184285335506&targetid=915850255573&device=c&mktype=pla&googleloc=9015122&campaignid=10454925596&mkgroupid=109413763411&rlsatarget=pla-915850255573&abcId=2145999&merchantid=115016844&gclid=EAIaIQobChMI8P27wuPa6gIVjobACh0hsAAIEAkYAyABEgJ5dPD_BwE

This is just cool looking, but probably doesn't have water cooling:

https://www.ebay.com/i/174072985181?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=174072985181&targetid=915850255573&device=c&mktype=pla&googleloc=9015122&poi=&campaignid=10454925596&mkgroupid=109413763411&rlsatarget=pla-915850255573&abcId=2145999&merchantid=6296724&gclid=EAIaIQobChMI8P27wuPa6gIVjobACh0hsAAIEAQYBiABEgLfpPD_BwE

 

 

[DailyProcrastinator]

1 hour ago, Elgorian said:

Okay, cool. Pictures don't really do that part justice, just looks like solid black mesh. 

Here is my case, the foam is dense but the light still passes through. This picture was also taken with all the lights on in my office.