Jump to content

Gpu isn’t detected from boot

I’ve had my pc setup for over a year and decided it needed some much needed wire management so I unplugged everything cleaned it put it back together and plugged everything back in but when I went to boot my pc an led on my motherboard said it can’t detect my gpu but the fans on the gpu are still running I tried the other pcie port and checked for damage and both were fine so I’m suspecting it’s the psu but sense it’s worked not even an hr before it might be just the wire that goes from the psu and the gpu 

 

my specs are:

motherboard: msi b450 gaming 

gpu: gtx 1660

cpu: ryzen 7 2700

 

I’m just asking if anything I’m saying sounds off or wrong before I go and buy a new wire and be out of an pc for a few days

Link to comment
Share on other sites

Link to post
Share on other sites

Re seat the GPU. 

Clean the pcie slot and then try. 

1 minute ago, isaacjsimpson03 said:

before I go and buy a new wire and be out of an pc for a few days

Is your PSU modular ? Does it have cable extensions by any chance?

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

15 hours ago, TofuHaroto said:

Re seat the GPU. 

Clean the pcie slot and then try. 

Is your PSU modular ? Does it have cable extensions by any chance?

I’ve re seated it and sprayed out the port with canned air and yes the psu is modual and the connectors going into the psu and the gpu disconnect on each end my monitor sayes hdmi is active and the fans spin but post says it can’t detect my gpu on any of the pcie  ports

 

Link to comment
Share on other sites

Link to post
Share on other sites

15 hours ago, TofuHaroto said:

Re seat the GPU. 

Clean the pcie slot and then try. 

Is your PSU modular ? Does it have cable extensions by any chance?

I’ve re seated it and sprayed out the port with canned air and yes the psu is modual and the connectors going into the psu and the gpu disconnect on each end my monitor sayes hdmi is active and the fans spin but post says it can’t detect my gpu on any of the pcie  ports

 

Link to comment
Share on other sites

Link to post
Share on other sites

4 hours ago, isaacjsimpson03 said:

the psu and the gpu disconnect on each end

Wait so are they unplugged or are they faulty?

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

Can you boot into bios?

Also, inspect your graphics cards PCB, you might have accidentally broken off some SMD component.

If you need help on used parts, contact me. I'm an used enthusiast.

Open the spoiler to see some cool stuff!

Spoiler

My old/new tech Collection!

 

CPUs (11)

Intel Pentium III @ 733Mhz (Oldest of the Bunch)

Intel Pentium 4 @ 2.8Ghz (2002)

Intel Pentium 4 @ 3.0Ghz (2003)

AMD Sempron 64 2800+ @ 1.6Ghz (2004, Aug)

AMD Athlon 64 3500+ @ 2.2Ghz (2004, Jun)

2X Intel Xeon X5355 @ 2.66Ghz (2006, Q4)

Intel Pentium E2140 @ 1.6Ghz (2007, Q2)

Intel Xeon E5630 @ 2.53Ghz (2010, Q1)

Intel Core2 Duo E8400 @ 3Ghz (2008, Q1) (In use, @ 3.61Ghz)

Intel Pentium E6500 @ 2.93Ghz (2008, Q1)

 

GPUs (6)

Palit GeForce 6800 GS (Should be working, AGP 8X)

Club 3D GTS 450 (Working, PCI-e 16x)

Sapphire Radeon X800GTO (Working, PCI-e 16x)

Nvidia GeForce 4 (Last time worked, AGP 4X)

Nvidia GeForce FX (No idea, AGP 4X)

Gigabyte Radeon HD 7970 OC (Semi-dead, PCI-e 16x)

 

Ram (1)

No idea of the brand or Socket (Whopping 16 Mb memory)

 

Cables (1)

CrossFire X Cable

 

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, PartyWire said:

Can you boot into bios?

If it can't display an image. 

It won't be able to. 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×