CoolerMaster ML240L Aura Sync problem

[BigRecoiilz]

I'm trying to sync my aio cooler (brand in title) to asus aura sync but i dont see it popping up. what do i do? i've seen a lot of people saying to plug the 4pin rgb connect to the 4pin header on my board but i don't know if that'll work. i don't have an Asus board btw

[Dujith]

What motherboard do you have?

[BigRecoiilz]

20 hours ago, Dujith said:

What motherboard do you have?

Gigabye Z390 UD

[Dujith]

3 hours ago, Hz Eurythmic said:

Gigabye Z390 UD

The Asus sync is just for that: Asus products.

You will need the RGBFusion software from Gigabyte, and connect the included RGB hub (from your AIO) to the motherboard (the MB 12V connection)

 

[BigRecoiilz]

8 minutes ago, Dujith said:

The Asus sync is just for that: Asus products.

You will need the RGBFusion software from Gigabyte, and connect the included RGB hub (from your AIO) to the motherboard (the MB 12V connection)

 

not true. my ram isn't asus and it's compatible with aura sync, and my aio is too. it says it on the company website

[Dujith]

Since the AIO will have to fed through the Motherboard it will have to use the RGBFusion software

The Ram works in another way and might also work with that software.

 

And yes its says so on the site, but that just means it accepts the 12V RGB and 5v Argb through the controller.

 

Coolermaster "promised" it should work through the USB with other software. But their software is buggy as hell and wont work half the time.

The way people get it to work is connecting the hub to the motherboard.

 

To get it to all sync up you will need to see if RGBFusion supports the RAM

[BigRecoiilz]

1 minute ago, Dujith said:

Since the AIO will have to fed through the Motherboard it will have to use the RGBFusion software

The Ram works in another way and might also work with that software.

 

And yes its says so on the site, but that just means it accepts the 12V RGB and 5v Argb through the controller.

 

Coolermaster "promised" it should work through the USB with other software. But their software is buggy as hell and wont work half the time.

The way people get it to work is connecting the hub to the motherboard.

 

To get it to all sync up you will need to see if RGBFusion supports the RAM

will my asus rog strix rx580 work with the fusion program?

[Dujith]

No  

You can try and connect the controller through the USB and use CM their software. It might have improved... might....

 

Or sell your motherboard and get an Asus one so the software can do everything.

 

Because of this some people have started opensource software like https://gitlab.com/CalcProgrammer1/OpenRGB