Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Shisimona

Idle temps?

Recommended Posts

Posted · Original PosterOP

So I got my new case in today. Moved everything over. 

But for some reason, my Idle temp stays at 40 degrees. Doesn't go any lower then that. Before I switched, it would be at around 25-27 on idle.

But when I did 15 mins of Cinebench R20, temps stayed around 50-52 load. Then I went to OCCT within 10 secs and same thing after 15 mins. Load temps are the same. Nothing changed there.
 

I don't know if my idle temps are reading proper. As you can see OCCT lowest said 28 but in HWMonitor is says 50. HWMonitor was running when I was running both Cinebench R20 and OCCT. 

I went from a Phanteks Enthoo Pro M *Mid Tower* to the Phanteks 719. 

CPU cooler is a NH-D15 running a single fan. 
 

OCCT.jpg

Link to post
Share on other sites

You have load temps people would die for.

 

Idle temps, wouldn't worry about. Maybe give the TIM a couple days to push out a bit.

 

Try using HWInfo64 instead of HWMonitor. Your boost readings are way high for that chip.


 

Lid-less PGA 2700x / ROG B450-I Gaming / Corsair 3000mhz SK Hynix / RTX 2060 / EVGA 750w

Lid-less 8700K / Maximus X Hero / G.Skill 4266mhz B-Die / RTX 2060 / Antec 1000w CP series

Ryzen Athlon 220ge with Vega Graphics / Asus Prime B450M-A / Corsair LED 3000mhz / 550w Antec Office PC.

DFI LanParty UT / Opteron 148 / DDR Corsair XMS Expert / X1800 XT 256MB Bios modded

Asus CrossHair Formula IV / Phenom II x4 B97 / Dominator GT 2000mhz. / EVGA GTX 770

Link to post
Share on other sites
Posted · Original PosterOP

I did a couple restarts, and it seems to be reading proper now. On OCCT, Core Temp, HWMonitor and HWInfo64 *just installed it*. My idle temps are back to what they were before. 

Yeah, everyone likes my load temps. When I use both fans on my D15, I get about max temps of 47-48. I've actually had people say they don't believe me that I have temps like that for an air cooler. 

I've actually had my boost speed hit 7GHz on all cores once. Not sure if it was error or what. I haven't had any issues with it at all.

Link to post
Share on other sites
1 hour ago, Shisimona said:

I did a couple restarts, and it seems to be reading proper now. On OCCT, Core Temp, HWMonitor and HWInfo64 *just installed it*. My idle temps are back to what they were before. 

Yeah, everyone likes my load temps. When I use both fans on my D15, I get about max temps of 47-48. I've actually had people say they don't believe me that I have temps like that for an air cooler. 

I've actually had my boost speed hit 7GHz on all cores once. Not sure if it was error or what. I haven't had any issues with it at all.

HWMonitor is known for false reporting. HWinfo64 should be pretty consistent and accurate for you.

 

Seems like a pretty reasonable voltage relevant to the clock speed. My 2700x 3.7ghz p-state is 1.212v. Runs super cool. Little different story at 4ghz and up. The voltage scaling goes crappy.


 

Lid-less PGA 2700x / ROG B450-I Gaming / Corsair 3000mhz SK Hynix / RTX 2060 / EVGA 750w

Lid-less 8700K / Maximus X Hero / G.Skill 4266mhz B-Die / RTX 2060 / Antec 1000w CP series

Ryzen Athlon 220ge with Vega Graphics / Asus Prime B450M-A / Corsair LED 3000mhz / 550w Antec Office PC.

DFI LanParty UT / Opteron 148 / DDR Corsair XMS Expert / X1800 XT 256MB Bios modded

Asus CrossHair Formula IV / Phenom II x4 B97 / Dominator GT 2000mhz. / EVGA GTX 770

Link to post
Share on other sites
Posted · Original PosterOP
1 hour ago, ShrimpBrime said:

HWMonitor is known for false reporting. HWinfo64 should be pretty consistent and accurate for you.

 

Seems like a pretty reasonable voltage relevant to the clock speed. My 2700x 3.7ghz p-state is 1.212v. Runs super cool. Little different story at 4ghz and up. The voltage scaling goes crappy.

Yeah, above 4GHz, it starts getting a little power hungry. I did get it to 4.4GHz but my voltage was near 1.5v. A little much. I did run OCCT and Cinebench R20 for 15 mins each. Nothing crashed. I know not enough time. Temps were creeping up to 80 degrees. Wasn't comfortable with that. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×