Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Iitucktuckii

Cpu temps running 89c after installing new AIO

Recommended Posts

Posted · Original PosterOP

I just installed the new ekwb AIO and now my temps are sitting at 89c in the bios. What did I do wrong. I plugged it in the same as the previous Corsair AIO that had no problems. It feels like there is water being pumped through the AIO. Attached are pictures of the temps in bios and the mobo lights. I’m just not sure what I did wrong

8C954729-88BC-404D-865D-3A528BE06962.jpeg

FF92EA39-D778-41AB-8C6D-E9B004A03558.jpeg

Link to post
Share on other sites

bad mount?

not enough thermal past?

forget to remove a sticker covering the block?


Good luck, Have fun, Build PC, and have a last gen console for use once a year. I should answer most of the time between 9 to 3 PST

NightHawk 2.0: R7 2700 @4.0ghz, B450m Steel Legends, H105, 4x8gb Gell EVO 2866, XFX RX 580 8GB, Corsair RM750X, 500 gb 850 evo, 500gb 850 pro and 5tb Toshiba x300

Skunkworks: R5 3500U, 16gb, 250 intel 730, 500gb Adata XPG 6000 lite, Vega 8. HP probook G455R G6

Condor (MC server): 6600K, z170m plus, 16gb corsair vengeance LPX, samsung 750 evo, EVGA BR 450.

Bearcat (F@H box) core 2 duo, 1x4gb EEC DDR2, 250gb WD blue, 9800GTX+, STRIX 660ti, supermicro PSU, dell T3400.

Rappter(unfinished compute server) HP DL380G6 2xE5520 24GB ram with 4x146gb 10k drives and 4x300gb 10K drives, running NOTHING can't get anything to work

Spirt  (unfinished NAS) Cisco Security Multiservices Platform server e5420 12gb ram, 1x6 1tb raid 6 for plex + Need funding 16+1 2tb raid 6 for mass storage.

PSU Tier List      Motherboard Tier List      How to get PC parts cheap    HP probook 445R G6 review

 

"Stupidity is like trying to find a limit of a constant. You are never truly smart in something, just less stupid."  @CircleTech

 

Link to post
Share on other sites

Did you remove any plastic film that was on the bottom of the coldplate?

If you did or there wasn't any then reseat the block. Clean off the thermal paste from the AIO and the CPU, reapply your thermal paste to the CPU and then remount it.

Link to post
Share on other sites

My guess is cooler paste or some sort of water flow issue.  Could be a fan issue but it would take time for temps to build to that after it was off for a while.  If they go right to throttle it’s because heat isn’t getting out of the cpu.


Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to post
Share on other sites
Posted · Original PosterOP

Thank you both for the quick replies. I found out that I installed the two mounting brackets on each side of the block upside down and now we are sitting at 32c. Thank y’all again and I’m sorry for the stupidity 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×