Any ideas how to move this air out?

[Zerotolerance94]

Hello guys, 

So re tubed and upgraded some parts of my loop now filling it up and then this happens, see photo, anyone got any ideas how to move this air out? 

I've been tilting the case for over an hour every which way from Sunday and have been pushing pressure into the loop through a tube attached to the top of the res filled with coolant but can't seem to get even a bit more coolant to flow in more than a trickle. 

Cheers 

[brdy]

You have air coming in somewhere

[Zerotolerance94]

I'd see a leak somewhere though wouldn't I if there was air leaking into the loop

[Skiiwee29]

I had a similar problem that ended up being a flow guidance piece inside my CPU block that was causing to much restriction. Once i removed that, I had proper pressure again throughout my full loop. 

[Zerotolerance94]

Will give that a shot, if that's the case EK have some serious issues with their D5's and Velocity blocks

[Zerotolerance94]

@Skiiwee29

My friend I thank you! 

Took the jet plate out and filled up and low an behold its worked. 

 

EK need to do some homework here and fix this issue 

[W-L]

6 hours ago, Zerotolerance94 said:

Hello guys, 

So re tubed and upgraded some parts of my loop now filling it up and then this happens, see photo, anyone got any ideas how to move this air out? 

I've been tilting the case for over an hour every which way from Sunday and have been pushing pressure into the loop through a tube attached to the top of the res filled with coolant but can't seem to get even a bit more coolant to flow in more than a trickle. 

Cheers 

 

You will need to move the case around to force the air back around through into the res. Also why does your res have three tubes going into the res, a fill tube?