Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Voylinslife

Installing a 1.8kg cpu cooler a good idea?

Recommended Posts

3 minutes ago, Voylinslife said:

 

Hello,

 

This won't damage the motherboard, unless you move it around then it could get loose and wreck havoc if it's not properly secure.


Don't forget to quote (arrow bottom left of the message) or use name tag (@name) for us to see your answer.

Link to post
Share on other sites
5 minutes ago, Voylinslife said:

https://www.scythe.co.jp/product/cpu-cooler/scnj-5000/
This is the cooler I would like to install in my case, I'm usin the AM4 socket but wondering if this cooler is maybe a bit on the heavy side and if it can cause damage when being mounted  because of it's weight or if it can damage the board when moving my pc.

Anybody has experience with this?

umm, would not really recommend unless you have a strong mobo, for example 

gigabyte recommends a may of 450 gram cooler (read it somewhere could be old info)


HI, if you liked what i said then please like

Link to post
Share on other sites

NH-D15 is 1.32kg with fans, so as long as the mounting is proper, I wouldn't worry too much when it is sitting still. Wouldn't recommend doing any kind of sudden movements (bumps, drops etc) when moving it though.


Skynet: MacBook Pro Late 2016 Space Gray | i7-6820HQ 2.7 GHz | 16 GB LPDDR3 | Radeon Pro 455 2048 MB | 512 GB NVMe SSD | 15" 2880x1800

HAL9000: Intel i5-9600k | Cryorig M9 | 16 GB Corsair Vengeance LPX DDR4 3200 MHz | Gigabyte Z390I AORUS PRO WIFI | MSI GTX 1080 Ti SeaHawk X | 1 TB Samsung 970 Evo Plus + 1 TB Crucial MX500 + 256 GB Samsung 850 Pro | Corsair TX650M | NZXT H210i | LG 34UM95 34" 3440x1440

Hydrogen server: Xeon E5-2675 v3 | Cooler Master Hyper 212X | 64 GB Kingston/Samsung DDR4 ECC | Asus Z10PA-D8 | Corsair HX1000 | 256 GB Samsung 850 Evo + 3x 3 TB WD Red + 2 TB Seagate | Fractal Design Define R5 | unRAID 6.7.0

Carbon server: Fujitsu PRIMERGY RX100 S7p | Xeon E3-1230 v2 | 16 GB DDR3 ECC | 60 GB Corsair SSD & 250 GB Samsung 850 Pro | Intel i340-T4 | ESXi 6.5.1

Big Mac cluster: 2x Raspberry Pi 2 Model B | 1x Raspberry Pi 3 Model B | 2x Raspberry Pi 3 Model B+

Link to post
Share on other sites

Don't move your PC after it's built then, though as long as it's not some really cheap board it should be fine


CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
5 minutes ago, Jurrunio said:

Don't move your PC after it's built then, though as long as it's not some really cheap board it should be fine

It's a gigabyte B450M S2H, not sure if it's considered a cheap board or not, was expensive for me at least 😛

Link to post
Share on other sites

Go for it, just make sure your screws are all down and your board is snug to the standoffs, better make sure those are snug too. Nothing wrong with big heavy coolers if it’s performance your after.


X5690 E.S. @ 4209MHz 1.35v/Thermalright True Spirit 140 Power/TF8/TY-143
Asus Rampage III Formula @ 200.5/3608/3608 Bios 0702|Intel 545S 256GB x2
6GB Super Talent Chrome + 10GB G.Skill RJ+PS Mix @ 802MHz 9-9-9-24 2T 1.575v
EVGA GTX 980 Classified 3988 @ 1497/2001|Asus Xonar Essence ST|KEF M500
CM Silent Pro M2 850|Fractal Design Meshify C/Panaflo NMBx4|TY-147x2|ZM-MFC2

Link to post
Share on other sites
5 hours ago, Srijan Verma said:

umm, would not really recommend unless you have a strong mobo, for example 

gigabyte recommends a may of 450 gram cooler (read it somewhere could be old info)

Allow me to clear things. The mobo weight limits are for coolers that don't use backplate (aka push pins or other such things). As those coolers will rely on mobo PCB strength only. If cooler uses backplate, there are no weight limits. The reason is that then backplate distributes weight over whole motherboard. So with larger coolers (and remember we are talking this after Noctua D14/15/S, be Quiet! Dark Rock Pro 1/2/3/4, Cryorig R1 Ultimate and Phanteks PH-TC14PE have been a thing for long time), the backplate is the key. Also making sure motherboard is tightly in place. In that situation, only dropping case from significant height will break something. For example case falling over won't cause anything.

 

@Voylinslife, go for it if the cooler is otherwise something you want. Weight of the cooler doesn't always translate to cooling performance.


^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×