Jump to content

Problem with asus strix rtx2080ti OC - no signal - buzzing sound

RichardK
 Share
Posted

Hi All,

 

I just did my first hard tubed water cooling build. I finished this yesterday and leak tested it for 3 hours no leaks at all. Yesterday I played games and there was no issue at all. I had put paper in my computer for the night to check for leaks. This morning i checked for leaks, i didn't see any leaks. However, when i started my computer this morning a weird buzzing sound came from my graphics card accompanied with no signal. My computer can boot and I have signal via the mainboard HDMI connector, but my gpu isnt detected in the device manager. I checked my bios (maximus xi) and it doesn't detect my gpu. I also tried different cables from my psu to my gpu (power leds are white), no effect. I do run the gpu via a vertical mount bracket with a riser cable (which i use for the first time), could the cable/pcie slot bracket suddenly be causing this issue?

 

Do you guys have any tips?

 

Thanks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

sounds like an issue with the riser cable most likely. Have you tried remounting everything with it?

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo | 2x 2tb Crucial MX500 SSD | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 16gb Gskill Flare X 3200mhz | Corsair RM550x PSU | Asus Strix GTX1070 | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Thanks a lot for your reply.

 

I did reconnect the riser cable in the pcie slot of my motherboard. however i did not remount my gpu in the riser bracket slot (as i need to drain my whole loop). So a faulty connection with riser cable/bracket to pcie slot on motherboard can cause the buzzing sound accompanied with no signal/detection of the gpu?

 

I will try to drain my water loop and remount my gpu in the slot. Can i troubleshoot without filling my loop again?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, Skiiwee29 said:

sounds like an issue with the riser cable most likely. Have you tried remounting everything with it?

Thanks a lot for your reply.

 

I did reconnect the riser cable in the pcie slot of my motherboard. however i did not remount my gpu in the riser bracket slot (as i need to drain my whole loop). So a faulty connection with riser cable/bracket to pcie slot on motherboard can cause the buzzing sound accompanied with no signal/detection of the gpu?

 

I will try to drain my water loop and remount my gpu in the slot. Can i troubleshoot without filling my loop again?

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×