Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
ZarinPeace

Overclocked memory from 2400 to 2666 and killed itself.

Recommended Posts

Posted · Original PosterOP

I overclocked my 8gb x 2 ram from 2400 to 2666 using the and ryzen overclock software. When the system restarted, it showed a black screen. No input.

Specs:

Ryzen 3 3200g

8gb x 2 ballistix sport lt memory

Gtx 1660 zotac

Tuf b450 m plus gaming motherboard.

1tb Seagate barracuda compute hdd

240gb crucial ssd

 

Link to post
Share on other sites

just restart the cmos, there is usually a button on the motherboard or jumper pins. If not, just take out the BIOS battery for few minutes and put it back. 

 

You haven't killed anything. That's what happens when memory OC fails. It's normal and it's what you will experience often when trying to OC the memory. 

Link to post
Share on other sites
13 minutes ago, ZarinPeace said:

I overclocked my 8gb x 2 ram from 2400 to 2666 using the and ryzen overclock software. When the system restarted, it showed a black screen. No input.

Specs:

Ryzen 3 3200g

8gb x 2 ballistix sport lt memory

Gtx 1660 zotac

Tuf b450 m plus gaming motherboard.

1tb Seagate barracuda compute hdd

240gb crucial ssd

 

welcome to memory overclocking. You'll have to reset your bios settings to get back up and running. I did a quick read of your motherboards manual and there is a 2 pin jumper in the lower right hand corner just to the right of your chipset which can be shorted to reset things. I would suggest referring to your motherboard manual page 1-1 detail 8 if you can't find it.

This is the unfortunate part of memory tweaking on boards with a lack of overclocking conveniences. If you want a more convenient way to rest your bios settings you could always wire your computer case's reset switch to the 2 pin location I referenced earlier.

Link to post
Share on other sites
Posted · Original PosterOP
5 minutes ago, WereCat said:

just restart the cmos, there is usually a button on the motherboard or jumper pins. If not, just take out the BIOS battery for few minutes and put it back. 

 

You haven't killed anything. That's what happens when memory OC fails. It's normal and it's what you will experience often when trying to OC the memory. 

I reset the cmos and nothing happened. I took out the battery and waited for about 5 minutes and put it back in. Nothing happened... Still doesn't boot.

Link to post
Share on other sites

dont you have debug LEds on that board? what do they say?


CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
7 minutes ago, ZarinPeace said:

Nada. No led besides lighting.

have  you double checked that the board didn't swap video output to the on board graphics. It happens sometimes

Link to post
Share on other sites
Posted · Original PosterOP
7 minutes ago, Arrogath said:

have  you double checked that the board didn't swap video output to the on board graphics. It happens sometimes

Yes. I switched to the Mobo HDMI port. 

 

Link to post
Share on other sites
Posted · Original PosterOP

Only thing I can think of is maybe taking the ssd out and hooking it up to my laptop. Maybe then I can take the ryzen overclock software out.

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×