Intel HD takes over amd display

[milantheworse]

Hello I have Intel HD 4200

I have a rx570.. when the drivers is install.

The first gpu is Intel HD. How can I. Change the Rx to first gpu.

[Uptivuptiz]

Just plug the monitor into the GPU instead of the motherboard.

[milantheworse]

1 minute ago, Uptivuptiz said:

Just plug the monitor into the GPU instead of the motherboard.

It only I've display at the boot. When Al drivers is load then only the hd give display but it recognises the rx

[mariushm]

Go in bios and configure it there to always look for graphics in pci-e slots, or to disable integrated graphics.

Then move the video cables from the motherboard connectors to your RX video card.

 

[milantheworse]

1 minute ago, mariushm said:

Go in bios and configure it there to always look for graphics in pci-e slots, or to disable integrated graphics.

Then move the video cables from the motherboard connectors to your RX video card.

Can it work if I do clean instal while in the bios is turn off the hd graphic

[mariushm]

No need to clean install or mess with drivers.

Just go in Bios and do what I said, and next time you go in Windows either the Intel integrated graphics won't be detected at all (so the intel video card drivers also won't load) and you'll have only AMD video card , or the AMD video card will be the primary one, with the intel one "sleeping", doing nothing.

 

[Meganter]

Hello,

 

Quick question though, is your monitor plugged to the GPU, the motherboard or both ? It should only be plugged to the GPU.