Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

RTX 2070 Super overclocking results

Recommended Posts

Posted · Original PosterOP



So I have recently purchased a RTX 2070 Super (the Gigabyte Windforce OC 3X 8G - GV-N207SWF3OC-8GD model) and used MSI Afterburner to overclock it. 

I didn't really find somewhere a comprehensive forum that compares OC results for this card but I have found some user reports here and there and I am a little bit surprised with my results (in a good way). 

When I look at the clock speed during a game (Shadow of the Tomb Raider for instance) or run a benchmark I have the following results:

Running at stock speed without any overclock I reach and cruise at 1905 MHz --> That seems pretty higher that what I have seen from other users

With an overclock I can reach a cruise clock speed of 2130 MHz . This is with a core clock of +140 and memory clock of +900 . I can push it a bit more while still being stable but I noticed that my core clock speed won't increase above 2130 MHz

Again, this seems a bit higher than what I've seen from other users. 


Anyone on this forum have had similar results or would know whay there seems to be some big differences ? 




Link to post
Share on other sites

With overclocks nearly all Turing cards not limited by poor thermals will go past 2GHz, better samples go past 2.1GHz, but 2.2GHz is top bin and top use of material results.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1


Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync


Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP

thanks for your reply. I'm fairly new to overclocking so not very much knowledgeable. 
If I understood correctly, graphics cards manufacturer provide different versions of a same GPU , with different coolers, video output support ... 

Gigabyte for instance apply by default a certain overclock to their cards. Looking at their website, the model I have (https://www.gigabyte.com/Graphics-Card/GV-N207SWF3OC-8GD#kf) is supposed to be running at 1785 MHz core clock. However the Aorus model (https://www.gigabyte.com/Graphics-Card/GV-N207SAORUS-8GC#kf) is supposed to run at 1905 MHz core clock. 

Is it possible they just apply the wrong (better) OC to the card I have ? 

And anyway it shouldn't make any difference since I pushed it higher and could have reached the same results with the same card at 1785 MHz default core clock ? 


Also adding my detailed specs:

CPU: AMD Ryzen 7 3700x with stock cooler

RAM: Corsair Vengeance LPX 16Go (2x8Go) DDR4 3000MHz

MB: Asus rog strix b450-f gaming

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now