Jump to content

6600k after overclocking really high temperature problem

Hello guys, i am trying to overclock my cpu, the temps before overclocking are perfect, but after i overclocked it to 41 and 1.32v, the temps are not normal at all. 

received_624690928098909.jpeg

received_256510102000369.jpeg

15816078343687750502765491115716.jpg

USER_SCOPED_TEMP_DATA_MSGR_PHOTO_FOR_UPLOAD_1581607937504.jpeg

Link to comment
Share on other sites

Link to post
Share on other sites

Cooler?

Before you reply to my post, REFRESH. 99.99% chance I edited my post. 

 

My System: i7-13700KF // Corsair iCUE H150i Elite Capellix // MSI MPG Z690 Edge Wifi // 32GB DDR5 G. SKILL RIPJAWS S5 6000 CL32 // Nvidia RTX 4070 Super FE // Corsair 5000D Airflow // Corsair SP120 RGB Pro x7 // Seasonic Focus Plus Gold 850w //1TB ADATA XPG SX8200 Pro/1TB Teamgroup MP33/2TB Seagate 7200RPM Hard Drive // Displays: LG Ultragear 32GP83B x2 // Royal Kludge RK100 // Logitech G Pro X Superlight // Sennheiser DROP PC38x

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Mister Woof said:

Cooler?

Gtx h110i, u can see in the first picture my temps before the overclocking is 42 on full load but after is 100

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Anas Dweik said:

Gtx h110i, u can see in the first picture my temps before the overclocking is 42 on full load but after is 100

Make sure it's installed correctly and everything is functional.

 

Plug in all the appropriate cables

Before you reply to my post, REFRESH. 99.99% chance I edited my post. 

 

My System: i7-13700KF // Corsair iCUE H150i Elite Capellix // MSI MPG Z690 Edge Wifi // 32GB DDR5 G. SKILL RIPJAWS S5 6000 CL32 // Nvidia RTX 4070 Super FE // Corsair 5000D Airflow // Corsair SP120 RGB Pro x7 // Seasonic Focus Plus Gold 850w //1TB ADATA XPG SX8200 Pro/1TB Teamgroup MP33/2TB Seagate 7200RPM Hard Drive // Displays: LG Ultragear 32GP83B x2 // Royal Kludge RK100 // Logitech G Pro X Superlight // Sennheiser DROP PC38x

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, JoostinOnline said:

That's a very high voltage for 4.1GHz.

Even when i turn on gaming boost, it uses 1.32 to overclock it to 4.1

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Mister Woof said:

Make sure it's installed correctly and everything is functional.

 

Plug in all the appropriate cables

I checked, all good. 

Link to comment
Share on other sites

Link to post
Share on other sites

9 minutes ago, Anas Dweik said:

Even when i turn on gaming boost, it uses 1.32 to overclock it to 4.1

Auto-overclocking utilities from older generations are pretty bad. Try lowering it to 1.3V and see if it's still stable. The power required (and therefore the heat output) increases exponentially as you raise the voltage.

 

I know you said you already checked if everything was installed correctly, but did you make sure to remove the sticker from the bottom of the cooler before screwing it into the motherboard?

 

Make sure to quote or tag me (@JoostinOnline) or I won't see your response!

PSU Tier List  |  The Real Reason Delidding Improves Temperatures"2K" does not mean 2560×1440 

Link to comment
Share on other sites

Link to post
Share on other sites

23 minutes ago, JoostinOnline said:

Auto-overclocking utilities from older generations are pretty bad. Try lowering it to 1.3V and see if it's still stable. The power required (and therefore the heat output) increases exponentially as you raise the voltage.

 

I know you said you already checked if everything was installed correctly, but did you make sure to remove the sticker from the bottom of the cooler before screwing it into the motherboard?

 

I'd be really surprised if that cooler couldn't handle 1.32v if everything is working correctly

 

It's an older chip, perhaps the toothpaste dried up under the ihs

Before you reply to my post, REFRESH. 99.99% chance I edited my post. 

 

My System: i7-13700KF // Corsair iCUE H150i Elite Capellix // MSI MPG Z690 Edge Wifi // 32GB DDR5 G. SKILL RIPJAWS S5 6000 CL32 // Nvidia RTX 4070 Super FE // Corsair 5000D Airflow // Corsair SP120 RGB Pro x7 // Seasonic Focus Plus Gold 850w //1TB ADATA XPG SX8200 Pro/1TB Teamgroup MP33/2TB Seagate 7200RPM Hard Drive // Displays: LG Ultragear 32GP83B x2 // Royal Kludge RK100 // Logitech G Pro X Superlight // Sennheiser DROP PC38x

Link to comment
Share on other sites

Link to post
Share on other sites

26 minutes ago, JoostinOnline said:

 

I changed the thermal paste from artic silver 5 to mx-4, now the 100% load in 1.32 v 41ghz is 60c max. And 30-37 idel

*i used the artic silver 5, 2 days ago. 

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, Mister Woof said:

I'd be really surprised if that cooler couldn't handle 1.32v if everything is working correctly

 

It's an older chip, perhaps the toothpaste dried up under the ihs

It worked after i changed the thermal paste to mx-4 

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, Anas Dweik said:

I changed the thermal paste from artic silver 5 to mx-4, now the 100% load in 1.32 v 41ghz is 60c max. And 30-37 idel

*i used the artic silver 5, 2 days ago. 

Different pastes don't really affect that much, definitely not to the extent you experienced.

 

Probably mounting pressure or not enough paste.

 

Glad you sorted it out

Before you reply to my post, REFRESH. 99.99% chance I edited my post. 

 

My System: i7-13700KF // Corsair iCUE H150i Elite Capellix // MSI MPG Z690 Edge Wifi // 32GB DDR5 G. SKILL RIPJAWS S5 6000 CL32 // Nvidia RTX 4070 Super FE // Corsair 5000D Airflow // Corsair SP120 RGB Pro x7 // Seasonic Focus Plus Gold 850w //1TB ADATA XPG SX8200 Pro/1TB Teamgroup MP33/2TB Seagate 7200RPM Hard Drive // Displays: LG Ultragear 32GP83B x2 // Royal Kludge RK100 // Logitech G Pro X Superlight // Sennheiser DROP PC38x

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×